Technical Documentation
New
Example: Tiered Service Definition
The following example shows you how to create a tiered service.
Requirements
This example uses the following software and hardware components:
- JunosE Release 7.1.0 or higher-numbered releases
- E Series router (ERX7xx models, ERX14xx models, the ERX310 router, the E120 router, or the E320 router)
- ASIC-based line modules that support Fast Ethernet or Gigabit Ethernet
Also, this example assumes that QoS profile triplePlayIP and QoS parameter maxSubscBW are configured.
Overview
A tiered service typically provides set bandwidths for both inbound and outbound traffic for a subscriber. In this example, the bandwidth values are parameterized.
Creating a Tiered Service
Step-by-Step Procedure
This example illustrates how to create a tiered service:
 | Note: Commented text explains the parameterized values in the example of the service definition macro file. Each example is followed by examples of RADIUS information and the CLI command that you can use to activate a subscriber service session. |
!parameterizes input and output bandwidth
<# tiered(inputBW, outputBW) #>
<# uid := app.servicemanager.getUniqueId #>
<# name := "SM-tiered-" $ uid #>
<# oname := "SM-O-tiered-" $ uid #>
classifier-list matchAll ip any any
rate-limit-profile <# name #> one-rate
committed-rate <# inputBW; '\n' #>
policy-list <# name; '\n' #>
classifier-group matchAll precedence 10000
rate-limit-profile <# name; '\n' #>
traffic-class best-effort
policy-list <# oname; '\n' #>
classifier-group matchAll precedence 10000
traffic-class best-effort
profile <# name; '\n' #>
ip policy secondary-input <# name #> statistics enabled merge
ip policy output <# oname #> statistics enabled merge
qos-profile triplePlayIP
qos-parameter maxSubscBW <# outputBW; '\n' #>
<# env.setResult("activate-profile", name) #>
<# env.setResult("secondary-input-stat-clacl", "matchAll") #>
<# env.setResult("output-stat-clacl", "matchAll") #>
<# endtmpl #>
Sample RADIUS Attributes
Step-by-Step Procedure
Table 1 provides the sample RADIUS attributes that you can use to activate the tiered service
Table 1: Sample RADIUS Attributes
RADIUS Attribute | Tag | Value |
|---|---|---|
username | none | client1@isp1.com |
activate-service | 1 | tiered(1280000, 5120000) |
Sample CLI Command
Step-by-Step Procedure
To activate a subscriber session with the configured tiered service:
