Technical Documentation
New
BGP Signaling for VPWS Overview
This section describes one way to configure BGP signaling for VPWS, but does not provide complete details about configuring BGP and BGP/MPLS VPNs..
Table 1 lists the commands used in this section to configure BGP signaling for VPWS.
Table 1: Commands to Configure BGP Signaling for VPWS
address-family l2vpn | neighbor next-hop-self |
address-family vpws | neighbor remote-as |
exit-address-family | neighbor update-source |
neighbor activate | router bgp |
Published: 2012-07-02
Copyright© 1999-2012 Juniper Networks, Inc. All rights reserved.
