Technical Documentation
New
Related Documentation
- Configuring a Dynamic Bridged Ethernet Interface
- Configuring Subscriber Management for IP Subscribers on Dynamic Bridged Ethernet Interfaces
- Example: Configuring IP Subscribers on a Dynamic Bridged Ethernet Interface Using the subscriber Command
- Example: Configuring IP Subscribers on a Dynamic Bridged Ethernet Interface Using IP Subscriber Management
Dynamic Bridged Ethernet Interfaces Overview
A bridged Ethernet interface is IP over bridged Ethernet over Asynchronous Transfer Mode (ATM) 1483 over ATM AAL5 over ATM.
When bridged Ethernet packets are received over ATM circuits, the bridged Ethernet and IP interfaces are dynamically constructed over the corresponding ATM 1483 interfaces and use the configuration data received from the RADIUS server, a profile, or both.
Figure 1 shows the protocol layers that represent the bridged Ethernet interface columns, and the layers within the interface columns that are static and dynamic.
Figure 1: Dynamic Bridged Ethernet over Static ATM 1483 Interface Columns
Related Documentation
- Configuring a Dynamic Bridged Ethernet Interface
- Configuring Subscriber Management for IP Subscribers on Dynamic Bridged Ethernet Interfaces
- Example: Configuring IP Subscribers on a Dynamic Bridged Ethernet Interface Using the subscriber Command
- Example: Configuring IP Subscribers on a Dynamic Bridged Ethernet Interface Using IP Subscriber Management
Published: 2012-06-26
Copyright© 1999-2012 Juniper Networks, Inc. All rights reserved.
