Monitoring the Current Configuration of the System in Auto Commit Mode

Purpose

Display the current configuration of the system, a specified virtual router, a specified interface, or a specified category of router settings. You can create a configuration script from the output by saving it as a file with the .scr extension. You can use the output filtering feature of the show command to include or exclude lines of output based on a text string you specify. See Command-Line Interface, for details.

  • This command was formerly documented as show config; that abbreviation is still supported.
  • This command provides configuration information based on the privilege level of the session (user). The output does not display any configuration data for commands that have privilege levels higher than that of the session. For example, if the session is enabled at level 5, issuing the show configuration command displays only output for commands at level 5 and below. For more information, see CLI Command Privileges.

Action

To display the current configuration of the system:

host1# show configuration
! Configuration script being generated on TUE JAN 29 200X 00:31:12 UTC! Juniper Networks Edge Routing Switch ERX-700
! Version: x.y.z (January 18, 200X 15:01)
! Copyright (c) 1999-200X Juniper Networks, Inc. All rights reserved.
Commands displayed are limited to those available at privilege level 10
! Juniper Networks Edge Routing Switch ERX-700
boot config running-configuration
boot system erx_x-y-z.rel
no boot backup
no boot subsystem
no boot backup subsystem
no boot force-backup
!
! Note:  The following commands are here to ensure that all virtual routers and
! vrfs are created before other commands that may need to reference them.
! These commands will be repeated further on as each virtual router and vrf
! has its configuration presented.
!
virtual-router default
virtual-router boston
!
ip vrf vpna
virtual-router vrA
!
hostname host1
exception protocol ftp anonymous null
!
controller t1 6/0
 channel-group 2 timeslots 1,3-8,10 speed 64
.
.
. 
!
virtual-router vrA
aaa authentication ppp default radius
aaa accounting ppp default radius
!
ip address-pool local
interface null 0
ip bgp-community new-format
no ip source-route
!
snmp-server
!
! End of generated configuration script.

To display the current configuration of a specified interface:
host1# show configuration interface serial 4/0
interface atm 4/0
 atm vc-per-vp 1024
 atm uni-version 3.0
!
interface atm 4/0.1 point-to-point
 profile pppoe myProfile
 qos-profile myQosProfile
!
interface atm 4/0.2 point-to-point
 qos-profile myQosProfile
 ip description TestIP
!
interface atm 4/0.3 point-to-point

To display the current configuration of a specified category
of router settings:
host1# show configuration category system file-system
boot config running-configuration
boot system m.rel
no boot backup
no boot subsystem
no boot backup subsystem

Related Documentation

						Copyright© 1999-2012 Juniper Networks, Inc. 
							All rights reserved.