Monitoring Active Data MDTs for IPv4

Purpose

Display information about active data MDTs. Use the following keywords to display the required information:

Action

To display information about a data MDT sender: 

host1:PE1#show ip pim data-mdt 225.1.1.1
PE11 - Sender
  C-SG: 10.11.0.100, 225.1.1.1
  P-SG: 1.1.1.1, 235.0.1.1
  MTI: TUNNEL gre:mvpn-dynamic-1
    Data rate/Threshold: 10012/500 Kbps
    Time until next MDT Join TLV: 25 seconds

To display information about a data MDT receiver: 

host1:PE1#show ip pim data-mdt 225.2.2.2
PE31 - Receiver
  C-SG: 10.13.0.100, 225.2.2.2
  P-SG: 3.3.3.3, 235.0.1.1
  MTI: TUNNEL gre:mvpn-dynamic-3
    Time until MDT Join TLV expires: 29 seconds

To display a summary of data MDT senders: 
host1:PE1#show ip pim data-mdt senders summary

VRF    S/R       C-Group     C-Source      P-Group    P-Source           MTI           
----   -------   ---------   -----------   ---------  --------   ---------------
PE11   Sender   225.1.1.1   10.11.0.100    235.0.1.1  1.1.1.1    TUNNEL gre:mvpn-dynamic-1
PE12   Sender   225.1.1.1   10.12.0.100    235.0.1.2  1.1.1.1    TUNNEL gre:mvpn-dynamic-2
Counts: 2 senders, 0 receivers, total 3.

To display the number of data MDT senders and receivers:
host1:PE1#show ip pim data-mdt count
Counts: 2 senders, 1 receivers, total 3.
Meaning
Table 32 lists the show ip pim data-mdt command
output fields.
Table 32: show ip pim data-mdt
Output Fields
Field Name
Field Description
PE Name
Name of the PE
C-SG
Address of the C-SG
P-SG
Address of the P-SG
MTI
Name of the dynamic IP tunnel on which the data MDT was
created
Data rate/Threshold
Rate and threshold of multicast data
Time until next MDT Join TLV
Configured delay until next MDT Join TLV
Time until MDT Join TLV expires
Configured delay until MDT Join TLV expires
Time until switchover from default-MDT
Configured delay until the data MDT switches over to
the default MDT
Related Documentation

						Copyright© 1999-2012 Juniper Networks, Inc. 
							All rights reserved.