Resetting PIM Counters and Mappings for IPv4

You can use the clear ip pim commands to reset PIM counters and mappings.

• Issue the clear ip pim auto-rp command in Privileged Exec mode to clear the group-to-RP router mappings that the router learned through auto-RP:
  host1#clear ip pim auto-rp 192.34.56.7

  There is no no version.

  Note: Specify the IP address of an RP to clear the group-to-RP mappings for a particular RP. If you do not specify an IP address, the router clears the group-to-RP mappings on all RP routers learned through auto-RP.

• Issue the clear ip pim remote-neighbor count command in Privileged Exec mode to clear the counters for remote neighbor statistics on all interfaces or the specified interface:
  host1#clear ip pim interface atm 3/0.5 count

  There is no no version.

• Issue the clear ip pim interface count command in Privileged Exec mode to clear the counters for multicast packet statistics on all interfaces or a specified interface:
  host1#clear ip pim interface atm 3/0.5 count

  There is no no version.

  Note: Specify the IP address of an interface to clear the counters for that interface. If you do not specify an interface, the router clears the counters on all interfaces.

Related Documentation

• Understanding PIM for IPv4 Multicast
• Enabling PIM for IPv4 on a Virtual Router
• Disabling PIM for IPv4 on a Virtual Router
• Enabling PIM for IPv4 on an Interface
• Removing PIM for IPv4
• Monitoring PIM for IPv4 Multicast
• router pim