Monitoring IPv6 Multicast Statistics
Purpose
Display statistics for packets received through multicast routes that the router has added to the multicast routing table and established on the appropriate line modules.
- You can specify a multicast group address or both a multicast group address and a multicast source address to display information about a particular multicast forwarding entry.
- You can use the active option to display information for the active multicast routes.
- You can specify the bandwidth threshold along with the active option to display information for the active multicast routes with admission bandwidth greater than the specified bandwidth threshold. The default bandwidth threshold is 4000 bps.
Action
To display the statistics of the multicast routes added to the multicast routing table:
host#show ipv6 mroute statistics IPv6 Multicast Routing Table
(S, G) uptime d h:m:s[, expires d h:m:s]
[Admission bandwidth: bps]
[QoS bandwidth: bps]
RPF route: addr/mask, incoming interface
neighbor address, owner route-owner
Incoming interface list:
Interface (addr/mask), State/Owner [(RPF IIF)]
Outgoing interface list:
Interface (addr/mask), State/Owner, Uptime/Expires(10:0:0:1:1::, ff0e::1) uptime 0 01:05:23
Admission bandwidth:
RPF route: 10:0:0:1::/64, incoming interface ATM2/3.1001
neighbor 10:0:0:1::1, owner Local
Incoming interface list:
ATM2/3.1001 (10:0:0:1::1/64), Accept/Pim (RPF IIF)
Outgoing interface list:
ATM2/0.200 (21:2:2:21::2:1/60), Forward/Pim, 0 01:05:23/never
Statistics:
Received : 346 pkts, 22144 bytes
Forwarded : 346 pkts, 22144 bytes
Rcvd on OIF: 0 pkts(10:0:0:1:2::, ff0e::1) uptime 0 01:05:23
RPF route: 10:0:0:1::/64, incoming interface ATM2/3.1001
neighbor 10:0:0:1::1, owner Local
Incoming interface list:
ATM2/3.1001 (10:0:0:1::1/64), Accept/Pim (RPF IIF)
Outgoing interface list:
ATM2/0.200 (21:2:2:21::2:1/60), Forward/Pim, 0 01:05:26/never
Statistics:
Received : 346 pkts, 22144 bytes
Forwarded : 346 pkts, 22144 bytes
Rcvd on OIF: 0 pktsMeaning
Table 61 lists the show ipv6 mroute statistics command output fields.
Table 61: show ipv6 mroute statistics Output Fields
Field Name | Field Description |
|---|---|
(S,G) | IPv6 addresses of the multicast source and the multicast group |
Uptime | Length of time that the (S,G) pair has been active, in days hours:minutes:seconds format |
Expires | Length of time for which the (S,G) pair will be active, in days hours:minutes:seconds format |
Admission bandwidth | Admission bandwidth (in bps) |
QoS bandwidth | QoS bandwidth (in bps) |
RPF Route | IPv6 address and prefix of the RPF route |
Incoming interface | Type and specifier of the incoming interface for the RPF route |
neighbor address | IPv6 address of the neighbor |
owner | Owner of the route:
|
Incoming interface list | List of incoming interfaces on the router. Details include:
|
Outgoing interface list | List of outgoing interfaces on the router. Details include:
|
Statistics |
Note: The display shows statistics after the virtual router has added the multicast route to the multicast routing table and established the route on the appropriate line module. Statistics for interactions before the route is established on the line module are not displayed. |
Hide Navigation Pane
Show Navigation Pane
SHA1