Monitoring Join Interface Details when IPv6 OIF Mapping is Configured
Purpose
Display details of the join interfaces corresponding to the mapped interfaces when OIF mapping is configured.
- You can specify a multicast group address or both a multicast group address and a multicast source address to display information about a particular multicast forwarding entry.
- You can use the active option to display information for the active multicast routes.
- You can specify the bandwidth threshold along with the active option to display information for the active multicast routes with admission bandwidth greater than the specified bandwidth threshold. The default bandwidth threshold is 4000 bps.
Action
To display details of the join interfaces:
host1#show ipv6 mroute oif-detail
IPv6 Multicast Routing Table(S, G) uptime d h:m:s[, expires d h:m:s]
[Data rate: Kbps] [SPT threshold: Kbps]
[Threshold: Kbps]
[Admission bandwidth: bps]
[QoS bandwidth: bps]
RPF route: addr/mask, incoming interface
neighbor address, owner route-owner
Incoming interface list:
Interface (addr/mask), State/Owner [(RPF IIF)]
Outgoing interface list:
Interface (addr/mask), State/Owner, Uptime/Expires
Join interface list:
Interface (addr/mask)[, State/Owner] (2000::1, ff1e::1) uptime 0 00:00:04
Admission bandwidth: 60000000 bps
QoS bandwidth: 0 bps (adaptive)
RPF route: 2000::1/128, incoming interface GigabitEthernet13/1/1
neighbor 2000::1, owner Local
Incoming interface list:
GigabitEthernet13/1/1 (fe80::290:1aff:fe42:8e5a/128), Accept/Mld (RPF IIF)
Outgoing interface list:
GigabitEthernet13/1/4 (fe80::290:1aff:fe42:8e5d/128), Blocked (intf-adm-limit)/Mld, 0 00:00:04/never
Join interface list:
GigabitEthernet15/0/1.10 (fe80::290:1aff:fe42:2731/128)Counts: 1 (S, G) entries
0 (*, G) entriesMeaning
Table 60 lists the show ipv6 mroute oif-detail command output fields.
Table 60: show ipv6 mroute oif-detail Output Fields
Field Name | Field Description |
|---|---|
(S,G) | IPv6 addresses of the multicast source and the multicast group |
Uptime | Length of time that the (S,G) pair has been active, in days hours:minutes:seconds format |
Expires | Length of time for which the (S,G) pair will be active, in days hours:minutes:seconds format |
Admission bandwidth | Admission bandwidth (in bps) |
QoS bandwidth | QoS bandwidth (in bps) |
RPF Route | IPv6 address and prefix of the RPF route |
Incoming interface | Type and specifier of the incoming interface for the RPF route |
neighbor address | IPv6 address of the neighbor |
owner | Owner of the route:
|
Incoming interface list | List of incoming interfaces on the router. Details include:
|
Outgoing interface list | List of outgoing interfaces on the router. Details include:
|
Join interface list | List of join interfaces on the router. Details include:
|
Counts | Numbers of types of source group mappings:
|
Hide Navigation Pane
Show Navigation Pane
SHA1