Monitoring the Characteristics of a Profile Assigned to Dynamic Interfaces
Purpose
Display information about profiles. You can use the name keyword to display information about a specific profile. You can use the brief keyword to display a list of profiles configured on the router.
Action
To display configuration information for a profile assigned to a dynamic interface:
host1#show profile name pppoe PPP Keepalive : 30 PPP Magic Number : enabled PPP Magic Number Mismatch :reject PPP Peer DNS Priority : disabled PPP Peer WINS Priority : disabled PPP Authentication : PPP Authentication Router : PPP Negotiate MRU : (use lower layer MRU) PPP Packet Log : disabled PPP State Log : disabled PPP Chap Challenge Length : 16 - 32 PPP Passive Mode : disabled PPP Multilink : disabled PPP IPCP Netmask Option : disabled PPP IPCP Lockout Option : disabled PPP IPCP Lockout : disabled PPP AAA Profile : PPP Multilink Fragmentation : disabled PPP Multilink Fragment Size : (use MTU) PPP Multilink Reassembly : disabled PPP Multilink Mrru : (use MRU) PPP Hash Link Selection : disabled PPP Initiate IP : disabled PPP Initiate IPv6 : disabled PPP Max-negotiations LCP : 30 PPP Max-negotiations IPCP : 30 PPP Max-negotiations IPv6CP : 30 PPP IPCP prompt-option DNS :enabled PPP Client Username : PPP Client Password : PPP Client Authentication : PPP Client Ip Address : 0.0.0.0 PPP Client Primary Dns Address : 0.0.0.0 PPP Client Secondary Dns Address : 0.0.0.0 PPP Client Primary Wins Address : 0.0.0.0 PPP Client Secondary Wins Address : 0.0.0.0
To display configuration information for a base profile assigned to a dynamic ATM 1483 subinterface:
host1#show profile name atm1483BaseProfile ATM1483 Auto-configure ip : disabled ATM1483 Auto-configure bridgedEthernet : disabled ATM1483 Auto-configure ppp : enabled ATM1483 lockout (seconds) ppp : range : 1-300 ATM1483 Auto-configure pppoe : enabled ATM1483 lockout (seconds) pppoe : range : 1-300 ATM1483 PVC circuit type : aal5autoconfig ATM1483 PVC service category : Nrt-Vbr ATM1483 PVC Peak rate : 10000, Avg rate : 2000, Burst size : 500 ATM1483 Description : VC_atm1483 ATM1483 Advisory Rx Speed : 2000000000
ATM1483 PVC OAM Administrative status: enabled ATM1483 PVC OAM Loopback frequency: 30
ATM1483 Ip Subscriber information: user : elaine domain : jpeterman.com password : putty ATM1483 IP Profile : none assigned ATM1483 Bridged Ethernet Profile : none assigned ATM1483 PPP Profile : none assigned ATM1483 PPPoE Profile : pppoeProfile
To display configuration information for a base profile assigned to a dynamic VLAN subinterface:
host1#show profile name vlanProfile VLAN Auto-configure ip : enabled VLAN Auto-configure pppoe : enabled VLAN Svlan Ethertype : auto-configure VLAN Advisory Rx Speed : 100 Kbps VLAN Advisory Tx Speed : 2500 Kbps VLAN Description : testing VLAN IP Profile : ipProfile VLAN PPPoE Profile : pppoeProfile VLAN Service Profile : none assigned Bridged Ethernet Mtu : 1971 Bridged Ethernet Service Profile : eastServiceProfile
To display profile configuration information related to IPv6 Neighbor Discovery router advertisements:
host1#show profile name ipv6Profile IPv6 Unnumbered interface : loopback 0 IPv6 Router : default IPv6 Src-Addr Validation : Disabled IPv6 Administrative MTU : 0 IPv6 ND Enabled : Enabled IPv6 ND ManagedConfig : Disabled IPv6 ND OtherConfig : Enabled IPv6 ND SuppressRa : Disabled IPv6 ND RaInterval : 50 IPv6 ND RaLifeTime : 1800 IPv6 ND ReachableTime : 0 IPv6 ND RaPrefix : 1234::/64 IPv6 ND ValidLifetime : 60 IPv6 ND PreferredLifetime : 60 IPv6 ND PrefixOnLink : Enabled IPv6 ND PrefixAutoConfig : Enabled IPv6 http redirect Url : http://www.google.com
Meaning
Table 57 lists the show profile command output fields.
Table 57: show profile Output Fields
Field Name | Field Description |
|---|---|
Profile | Name of the profile that is displayed |
IP address | IP address and subnet mask of the interface, or none if the interface is unnumbered |
Unnumbered interface | Specifier for the unnumbered interface, or none if the interface is numbered |
Router | Name of the virtual router assigned to the profile; interfaces created by the profile are attached to this virtual router |
Directed Broadcast | Enabled or disabled |
ICMP Redirects | Enabled or disabled |
Access Route Addition | Enabled or disabled |
Network Address Translation | Enabled or disabled; domain location (inside or outside) |
Source-Address Validation | Enabled or disabled |
Ignore DF Bit | Enabled or disabled |
Filter Option Packets | Router filters out packets with IP options; enabled or disabled |
Administrative MTU | MTU size configured on the profile |
TCP MSS value | Maximum segment size for TCP SYN packets traveling through the interface |
Inactivity Timer | Inactivity timer setting; enabled or disabled |
Route Map Name | Route map applied to the IP interface subscriber; enabled or disabled |
Auto Detect | Router automatically detects packets that do not match any entries in the demultiplexer table; enabled or disabled |
Auto Configure | Dynamic creation of subscriber interfaces on a primary IP interface; enabled or disabled |
IGMP | Enabled or disabled |
static-groups | Displays address of any static groups configured for IGMP |
Input policy | Name of input policy and whether statistics are enabled or disabled |
Output policy | Name of output policy and whether statistics are enabled or disabled |
PPP Keepalive | PPP keepalive period, in seconds |
PPP Magic Number | Enabled or disabled |
PPP Magic Number Mismatch | Indicates whether the router is configured to ignore the LCP peer magic number and retain the PPP connection when the peer has not negotiated an LCP magic number: ignore (ignore the peer magic number mismatch and retain the PPP connection), or reject (router terminates the PPP connection if it detects a peer magic number mismatch) |
PPP Peer DNS Priority | Enabled or disabled |
PPP Peer WINS Priority | Enabled or disabled |
PPP Authentication | Type of authentication configured: PAP, CHAP, or none |
PPP Authentication Router | Name of authentication virtual router |
PPP Negotiate MRU | MRU configured for the profile |
PPP Packet Log | Enabled or disabled |
PPP State Log | Enabled or disabled |
PPP Chap Challenge Length | Minimum and maximum Chap Challenge length |
PPP Passive Mode | Enabled or disabled |
PPP Multilink | Enabled or disabled |
PPP IPCP Netmask Option | Enabled or disabled |
PPP IPCP Lockout Option | Enabled or disabled |
PPP Max-negotiations IPCP | Maximum number of renegotiation attempts that the router accepts before terminating a PPP session |
PPP AAA Profile | AAA profile associated with this PPP interface |
PPP Multilink Fragmentation | Enabled or disabled |
PPP Multilink Fragment Size | Multilink fragment size for this PPP interface |
PPP Multilink Reassembly | Enabled or disabled |
PPP Multilink Mrru | Multilink MRRU value for this PPP interface |
PPP Hash Link Selection | Hash-based link selection for a PPP interface; enabled or disabled |
PPP Initiate IP | Initiation of IPv4 over this PPP interface; enabled or disabled |
PPP Initiate IPv6 | Initiation of IPv6 over this PPP interface; enabled or disabled |
PPP IPCP prompt-option dns | Prompts the CPE (Customer Premises Equipment) to negotiate the IPCP primary and secondary DNS options that are locally available with the broadband remote access server; enabled or disabled |
PPPoE Max Sessions | Maximum number of PPPoE subinterfaces that can be on an interface |
PPPoE Always-offer | Router offers to set up a session for the client, even if the router has insufficient resources to establish a session; enabled or disabled |
PPPoE Remote-Circuit-Id | The router captures and processes a vendor-specific tag containing a remote circuit ID transmitted from a digital subscriber line access multiplexer; enabled or disabled |
PPPoE Log PPPoeControlPacket | Enabled or disabled |
PPPOE duplicate-protect | Enabled or disabled |
PPPoE ACNAME | Access concentrator name |
PPPoE URL | URL sent in PADM message to PPPoE clients |
PPPoE MOTM | Message of the minute sent in the PADM message to PPPoE clients |
PPPoE Service-Name Table | Name of the PPPoE service name table, if configured for the specified profile |
ATM1483 Auto-configure | Whether autodetection of the specified upper-interface encapsulation type (bridged Ethernet, IP, PPP, or PPPoE) is enabled or disabled for a dynamic ATM 1483 subinterface |
ATM1483 lockout (seconds) | Encapsulation type lockout setting for the specified upper-interface encapsulation type (bridged Ethernet, IP, PPP, or PPPoE) configured on a dynamic ATM 1483 subinterface:
|
ATM1483 PVC circuit type | Encapsulation setting for the PVC configured on a dynamic ATM 1483 subinterface:
|
ATM1483 PVC service category | Service type setting for the PVC configured on a dynamic ATM 1483 subinterface: UBR (the default), UBR PCR, NRT-VBR, RT-VBR, or CBR |
ATM1483 PVC Peak rate | Peak cell rate, in Kbps, for the PVC configured on a dynamic ATM 1483 subinterfaces |
ATM1483 PVC Avg rate | Average rate, in Kbps, for the PVC configured on a dynamic ATM 1483 subinterface; also referred to as sustained cell rate |
ATM1483 PVC Burst size | Length in cells of the burst for the PVC configured on a dynamic ATM 1483 subinterface; also referred to as maximum burst size |
ATM1483 Description | Text description assigned to ATM 1483 subinterfaces that are created with this profile |
ATM1483 Advisory Rx Speed | Configured receive speed, in Kbps, for the dynamic ATM 1483 subinterface. The E Series LAC sends this value to the LNS in the RX Connect-Speed AVP [38]. |
ATM1483 PVC OAM Administrative status | Status of OAM F5 loopback cell generation (for VC integrity) on a circuit created with this profile: enabled or disabled |
ATM1483 PVC OAM Loopback frequency | Number of seconds between transmissions of OAM F5 end-to-end loopback cells on a circuit created with this profile |
ATM1483 Ip Subscriber information | Subscriber login information for the specified dynamic interface type |
ATM1483 Profile | Name of the profile assigned to the specified upper-interface encapsulation type (bridged Ethernet, IP, PPP, or PPPoE); these profiles are referenced in the base profile for a dynamic ATM 1483 subinterface as nested profile assignments |
VLAN Auto-configure | Whether auto detection of the specified upper-interface encapsulation type (IP or PPPoE) is enabled or disabled for a dynamic VLAN subinterface |
VLAN Advisory Rx Speed | Configured advisory receive speed, in Kbps, for the dynamic VLAN subinterface; the E Series LAC sends this value to the LNS in the RX Connect-Speed AVP [38] |
VLAN Advisory Tx Speed | Configured advisory speed, in Kbps, for the dynamic VLAN subinterface. |
VLAN Description | Text description assigned to VLAN subinterfaces that are created with this profile |
VLAN Profile | Name of the profile assigned to the specified upper-interface encapsulation type (IP or PPPoE); these profiles are referenced in the base profile for a dynamic VLAN subinterface as nested profile assignments |
VLAN Service Profile | Service profile name for a VLAN |
VLAN Svlan Ethertype | Ethertype that the packet must use this to create the dynamic VLAN subinterface |
Bridged Ethernet Mtu | MTU size configured for a dynamic bridged Ethernet interface |
Bridged Ethernet Service Profile | Name of the IP service profile associated with the interface profile for this dynamic bridged Ethernet interface |
IPv6 http redirect Url | URL to which a subscriber’s initial web browser session is redirected |
IPv6 Unnumbered interface | Name of interface without a specific address |
IPv6 Router | Router name or default |
IPv6 Src-Addr Validation | Source-Address Validation; enabled or disabled |
IPv6 Administrative MTU | MTU size |
IPv6 ND Enabled | State of the Neighbor Discovery; enabled or disabled |
IPv6 ND ManagedConfig | State of the Neighbor Discovery router advertisement managed flag; enabled or disabled |
IPv6 ND OtherConfig | State of the Neighbor Discovery router advertisement other config flag; enabled or disabled |
IPv6 ND SuppressRa | Status IPv6 router advertisement suppression; enabled or disabled |
IPv6 ND RaInterval | Interval (in seconds) of the Neighbor Discovery router advertisement |
IPv6 ND RaLifeTime | Lifetime (in seconds) of the Neighbor Discovery router advertisement |
IPv6 ND ReachableTime | Amount of time (in milliseconds) that the neighbor is expected to remain reachable |
IPv6 ND RaPrefix | Configured prefixes for Neighbor Discovery router advertisement |
IPv6 ND ValidLifetime | Amount of time (in seconds) that the router advertises the IPv6 prefix as valid |
IPv6 ND PreferredLifetime | Amount of time (in seconds) that the router advertises the specified IPv6 prefix as preferred |
IPv6 ND PrefixOnLink | State of the on-link flag; enabled or disabled |
IPv6 ND PrefixAutoConfig | State of the use the specified prefix for IPv6 autoconfiguration; enabled or disabled |
Hide Navigation Pane
Show Navigation Pane
SHA1