Monitoring MLPPP
Use the commands in this section to display information about MLPPP interfaces.
You can set a statistics baseline for MLPPP serial (member link) or bundle (multilink) interfaces using the baseline ppp command. Use the delta keyword with the show commands described below to display statistics with the baseline values subtracted.
After you configure multilink PPP, you can use the show ppp interface commands to display configuration and statistics information about MLPPP and MLPPP fragmentation and reassembly.
You can use the output filtering feature of the show command to include or exclude lines of output based on a text string you specify. For details, see show Commands in JunosE System Basics Configuration Guide.
![]() | Note: The E120 and E320 routers output for monitor and show commands is identical to output from other E Series routers, except that the E120 and E320 routers output also includes information about the adapter identifier in the interface specifier (slot/adapter/port). |
The following tasks display information about MLPPP interfaces:
- Monitoring Baseline Statistics for MLPPP Interfaces
- Monitoring MLPPP Information Configured on PPP Interfaces
- Monitoring MLPPP Summary Information
Monitoring Baseline Statistics for MLPPP Interfaces
Purpose
Display baseline statistics for PPP interfaces—including MLPPP interfaces, either individual serial (member link) interfaces or multilink (bundle) interfaces.
Action
To display PPP interface (including MLPPP interface) statistics without baselining:
- Use only the serial or mlppp keywords.
- For serial interfaces, specify the interface location in the format slot/port:channel/subchannel for CT3 modules.
- For MLPPP interfaces, specify the interface location as the name of the MLPPP bundle.
- The router implements the baseline by reading and storing the statistics at the time the baseline is set and then subtracting this baseline whenever baseline-relative statistics are retrieved.
- When baselining is requested, the time since the last
baseline was set is displayed in hours:minutes:seconds or days/hours format. If a baseline was not
set, the following message is displayed instead:
No baseline has been set
host1#show ppp interface statistics
PPP interface serial 2/0:4/1 is up No baseline has been set Interface statistics in out packets 0 0 octets 572 684 errors 0 0 discards 0 0 PPP interface serial 2/0:5/1 is up No baseline has been set Interface statistics in out packets 0 0 octets 572 684 errors 0 0 discards 0 0 PPP interface serial 2/1:4/1 is up No baseline has been set Interface statistics in out packets 0 0 octets 572 684 errors 0 0 discards 0 0 PPP interface serial 2/1:5/1 is up No baseline has been set Interface statistics in out packets 0 0 octets 572 684 errors 0 0 discards 0 0 4 ppp interfaces found
PPP interface mlppp group1 is up PPP multilink member-interface serial 2/0:1/1 is up No baseline has been set Interface statistics in out packets 0 0 octets 608 716 errors 0 0 discards 0 0 PPP multilink member-interface serial 2/0:2/1 is up No baseline has been set Interface statistics in out packets 0 0 octets 608 716 errors 0 0 discards 0 0 PPP multilink member-interface serial 2/0:3/1 is up No baseline has been set Interface statistics in out packets 0 0 octets 596 704 errors 0 0 discards 0 0
PPP interface mlppp group2 is up PPP multilink member-interface serial 2/1:1/1 is up No baseline has been set Interface statistics in out packets 0 0 octets 628 740 errors 0 0 discards 0 0 PPP multilink member-interface serial 2/1:2/1 is up No baseline has been set Interface statistics in out packets 0 0 octets 628 740 errors 0 0 discards 0 0 PPP multilink member-interface serial 2/1:3/1 is up No baseline has been set Interface statistics in out packets 0 0 octets 616 728 errors 0 0 discards 0 0 2 mlppp interfaces found
To display PPP interface (including MLPPP interface) statistics with baselining:
- Use the optional delta keyword with MLPPP show commands to specify that baselined statistics are to be shown.
host1#show ppp interface statistics delta
PPP interface serial 2/0:4/1 is up Time since last baseline 00:00:35 Interface statistics in out packets 0 0 octets 75 82 errors 0 0 discards 0 0 PPP interface serial 2/0:5/1 is up Time since last baseline 00:00:37 Interface statistics in out packets 0 0 octets 87 90 errors 0 0 discards 0 0 PPP interface serial 2/1:4/1 is up Time since last baseline 00:00:39 Interface statistics in out packets 0 0 octets 101 112 errors 0 0 discards 0 0 PPP interface serial 2/1:5/1 is up Time since last baseline 00:00:43 Interface statistics in out packets 0 0 octets 94 99 errors 0 0 discards 0 0 4 ppp interfaces found PPP interface mlppp group1 is up PPP multilink member-interface serial 2/0:1/1 is up Time since last baseline 00:00:17 Interface statistics in out packets 0 0 octets 28 26 errors 0 0 discards 0 0 PPP multilink member-interface serial 2/0:2/1 is up Time since last baseline 00:10:22
Interface statistics in out packets 0 0 octets 102 104 errors 0 0 discards 0 0 PPP multilink member-interface serial 2/0:3/1 is up Time since last baseline 00:00:19 Interface statistics in out packets 0 0 octets 112 126 errors 0 0 discards 0 0
PPP interface mlppp group2 is up PPP multilink member-interface serial 2/1:1/1 is up Time since last baseline 00:00:23 Interface statistics in out packets 0 0 octets 125 132 errors 0 0 discards 0 0 PPP multilink member-interface serial 2/1:2/1 is up Time since last baseline 00:00:25 Interface statistics in out packets 0 0 octets 135 138 errors 0 0 discards 0 0 PPP multilink member-interface serial 2/1:3/1 is up Time since last baseline 00:00:30 Interface statistics in out packets 0 0 octets 125 132 errors 0 0 discards 0 0 2 mlppp interfaces found
Meaning
Table 28 lists the show ppp interface statistics command output fields.
Table 28: show ppp interface statistics Output Fields
Field Name | Field Description |
|---|---|
PPP interface mlppp bundleName | Name and state (up or down) of the MLPPP interface |
PPP multilink member-interface interfaceName | Name and state (up or down) of the MLPPP member link interface |
Link interface administrative status | Administrative state of the member link interface: open (enabled) or closed (disabled) |
PPP multilink multiclass | Configuration of multiclass MLPPP on the MLPPP interface: enabled or disabled |
PPP multilink multiclass classes | Number of multilink classes created on the MLPPP interface: 1 through 8 |
PPP multilink multiclass fragmentation | Configuration of fragmentation of the multiclass MLPPP interface: enabled or disabled. If fragmentation is enabled then the command also lists the QoS traffic classes on which fragmentation is enabled. |
PPP multilink multiclass reassembly | Configuration of reassembly of the multiclass MLPPP interface: enabled or disabled. If reassembly is enabled then it also lists the QoS traffic classes on which reassembly is enabled. |
mlppp interfaces found | Number of MLPPP interfaces configured |
Time since last baseline | When baselining is configured, the time since the last baseline was set is displayed in hours:minutes:seconds or days/hours format |
receive class, transmit class | Number of multilink classes configured on the MLPPP bundle |
Interface statistics | Statistics for data received by (in) and transmitted (out) on the MLPPP interface:
|
Receive Class number | Information about the packets of the specified multilink class received by the router |
fragments in reassembly list | Number of buffered fragments reassembled |
reordered | Number of fragments reordered |
discarded fragments/bytes | Number of fragments and bytes that have been discarded. |
last received sequence number | Sequence number of the last multiclass MLPPP packet received |
Transmit Class number | Information about the packets of the specified multilink class transmitted by the router |
fragments | Number of fragments that are sent by the router |
last sent sequence number | Sequence number of the last multiclass MLPPP packet sent |
Bundle name | Name of the MLPPP bundle |
MLPPP interface interfaceName | Name and state (up or down) of the configured MLPPP interface |
LCP negotiated options | Negotiated LCP options for the local and peer systems:
|
Monitoring MLPPP Information Configured on PPP Interfaces
Purpose
Display statistics for MLPPP information configured on PPP interfaces.
Action
To display information about the MLPPP member links configured in bundle group1;
host1#show ppp interface mlppp group1 members PPP interface mlppp group1 is up PPP multilink member-interface serial 2/0:1/1 is up PPP multilink member-interface serial 2/0:2/1 is up PPP multilink member-interface serial 2/0:3/1 is up
To display information about all MLPPP member links configured for all bundles:
host1#show ppp interface mlppp members PPP interface mlppp group1 is up PPP multilink member-interface serial 2/0:1/1 is up PPP multilink member-interface serial 2/0:2/1 is up PPP multilink member-interface serial 2/0:3/1 is up PPP interface mlppp group2 is up PPP multilink member-interface serial 2/1:1/1 is up PPP multilink member-interface serial 2/1:2/1 is up PPP multilink member-interface serial 2/1:3/1 is up PPP interface mlppp group3 No member-interfaces found
To display information about all MLPPP encapsulated links, regardless of whether the links are members of an MLPPP bundle:
host1#show ppp interface mlppp links PPP multilink interface serial 2/0:1/1 is up PPP multilink interface serial 2/0:2/1 is up PPP multilink interface serial 2/0:3/1 is up PPP multilink interface serial 2/1:1/1 is up PPP multilink interface serial 2/1:2/1 is up PPP multilink interface serial 2/1:3/1 is up
To display configuration information about MLPPP member links configured in bundle group1:
host1#show ppp interface mlppp group1 config PPP interface mlppp group1 is up Network interface administrative status is open Configured network protocol is IPCP PPP multilink member-interface ATM 10/0.10 is up Link interface administrative status is open Link interface fragmentation is enabled Link interface fragment size is 128 Link interface reassembly is enabled Link interface administrative MRRU is 2000 PPP multilink member-interface ATM 10/0.11 is down (lower layer down) Link interface administrative status is closed Link interface fragmentation is enabled Link interface fragment size is 128 Link interface reassembly is enabled Link interface administrative MRRU is 2000 PPP multilink member-interface ATM 10/0.12 is down (lower layer down) Link interface administrative status is closed Link interface fragmentation is enabled Link interface fragment size is 128 Link interface reassembly is enabled Link interface administrative MRRU is 2000 PPP multilink member-interface ATM 10/0.13 is down (lower layer down) Link interface administrative status is closed Link interface fragmentation is enabled Link interface fragment size is 128 Link interface reassembly is enabled Link interface administrative MRRU is 2000 1 mlppp interfaces found
To display statistics about all configured MLPPP member links configured in bundle group1:
host1#show ppp interface mlppp group1 statistics PPP interface mlppp group1 is up PPP multilink member-interface ATM 10/0.10 is up No baseline has been set Interface statistics in out packets 0 0 octets 170 690 errors 0 0 discards 0 0 PPP multilink member-interface ATM 10/0.11 is down (lower layer down) No baseline has been set Interface statistics in out packets 0 0 octets 50 0 errors 0 0 discards 0 0 PPP multilink member-interface ATM 10/0.12 is down (lower layer down) No baseline has been set Interface statistics in out packets 0 0 octets 50 0 errors 0 0 discards 0 0 PPP multilink member-interface ATM 10/0.13 is down (lower layer down) No baseline has been set Interface statistics in out packets 0 0 octets 50 0 errors 0 0 discards 0 0 1 mlppp interfaces found
To display status information about the specified MLPPP bundle:
host1#show ppp interface mlppp group1 status PPP interface mlppp group1 is up 1 mlppp interfaces found
To display complete configuration, statistics, and status information about the specified MLPPP bundle:
host1#show ppp interface mlppp group1 full PPP interface mlppp group1 is up Network interface administrative status is open Configured network protocol is IPCP IPCP protocol configuration configured true administrative-status open ip-address 1.2.3.4 dns-precedence local wins-precedence local max-negotiations 10 IPCP protocol status operational-status up IPCP negotiated options local peer ip-address 1.2.3.4 6.7.8.9 primary-dns-address none none secondary-dns-address none none primary-wins-address none none secondary-wins-address none none OSINLCP protocol configuration configured false administrative-status open OSINLCP protocol status operational-status not present terminate-reason not configured PPP multilink member-interface serial 2/0:1/1 is up Link interface administrative status is open No baseline has been set Interface statistics in out packets 0 0 octets 1488 1972 errors 0 0 discards 0 0 LCP protocol configuration max-receive-unit use lower layer authentication none magic-number enabled magic-number-mismatch ignore keepalive-timer 30 seconds restart-timer 3 seconds max-terminate 2 max-configure 10 max-failure 5 LCP protocol status link-status network
LCP negotiated options local peer max-receive-unit 1590 1590 max-receive-reconstructed-unit 1590 1590 authentication none none magic-number 0x6c079eb0 0x2c5a5798 pfc none none acfc none none LCP Endpoint Discriminator options local discriminator class Locally Assigned Address local endpoint discriminator 0x31393933313030303800001b000001 peer discriminator class Locally Assigned Address peer endpoint discriminator 0x31393933313030303800001b000002 LCP protocol statistics in-keepalive-requests 70 out-keepalive-requests 70 in-keepalive-replies 70 out-keepalive-replies 70 keepalive-failures 0 max-renegotiation-terminates 10 PPP multilink member-interface serial 2/0:2/1 is up Link interface administrative status is open No baseline has been set Interface statistics in out packets 0 0 octets 1508 1996 errors 0 0 discards 0 0 LCP protocol configuration max-receive-unit use lower layer authentication none magic-number enabled magic-number-mismatch ignore keepalive-timer 30 seconds restart-timer 3 seconds max-terminate 2 max-configure 10 max-failure 5 LCP protocol status link-status network LCP negotiated options local peer max-receive-unit 1590 1590 max-receive-reconstructed-unit 1590 1590 authentication none none magic-number 0x7ada4a05 0x1bb178cd pfc none none acfc none none
LCP Endpoint Discriminator options local discriminator class Locally Assigned Address local endpoint discriminator 0x31393933313030303800001b000001 peer discriminator class Locally Assigned Address peer endpoint discriminator 0x31393933313030303800001b000002 LCP protocol statistics in-keepalive-requests 71 out-keepalive-requests 71 in-keepalive-replies 71 out-keepalive-replies 71 keepalive-failures 0 PPP multilink member-interface serial 2/0:3/1 is up Link interface administrative status is open No baseline has been set Interface statistics in out packets 0 0 octets 1568 2068 errors 0 0 discards 0 0 LCP protocol configuration max-receive-unit use lower layer authentication none magic-number enabled magic-number-mismatch ignore keepalive-timer 30 seconds restart-timer 3 seconds max-terminate 2 max-configure 10 max-failure 5 LCP protocol status link-status network LCP negotiated options local peer max-receive-unit 1590 1590 max-receive-reconstructed-unit 1590 1590 authentication none none magic-number 0x31cc52e0 0x32ebdec6 pfc none none acfc none none LCP Endpoint Discriminator options local discriminator class Locally Assigned Address local endpoint discriminator 0x31393933313030303800001b000001 peer discriminator class Locally Assigned Address peer endpoint discriminator 0x31393933313030303800001b000002 LCP protocol statistics in-keepalive-requests 74 out-keepalive-requests 74 in-keepalive-replies 74 out-keepalive-replies 74 keepalive-failures 0 1 mlppp interfaces found
To display information about the MLPPP interface:
host1#show ppp interface mlppp 0/0-1 full PPP interface mlppp 0/0-1 is up Network interface administrative status is open Configured network protocols are IPCP, IPV6CP IPCP protocol configuration configured true administrative-status open ip-address 192.168.1.1 dns-precedence local wins-precedence local ipcp-netmask-option disabled ipcp-lockout enabled IPCP protocol status operational-status up IPCP negotiated options local peer ip-address 192.168.1.1 100.100.100.17 ip-address-mask none none primary-dns-address none none secondary-dns-address none none primary-wins-address none none secondary-wins-address none none IPV6CP protocol configuration configured true ... PPP multilink member-interface ATM 0/0.10 is up Link interface administrative status is open Link interface fragmentation is enabled Link interface fragment size is (use MTU) Link interface reassembly is enabled Link interface administrative MRRU is (use MRU) Link interface hash-link-selection is disabled No baseline has been set ... Authentication status grant true session-timeout 31622400 seconds inactivity-timeout none monitor-ingress-only false accounting-timeout none peer-ip-address 100.100.100.17 peer-ip-address-mask none peer-primary-dns-address none peer-secondary-dns-address none peer-primary-wins-address none peer-secondary-wins-address none peer-ipv6-interface-id none
Meaning
Table 29 lists the show ppp interface mlppp command output fields
Table 29: show ppp interface mlppp Output Fields
Field Name | Field Description |
|---|---|
PPP interface mlppp | Name and administrative status (up or down) for an MLPPP bundle |
PPP multilink interface | Interface type, interface specifier, and administrative status (up or down) for an MLPPP member link |
Network interface administrative status | Indicates whether the interface for the MLPPP bundle is administratively enabled (open), meaning that the no ppp shutdowncommand is operational, or administratively disabled (closed), meaning that the ppp shutdown command is operational |
Configured network protocol | Network protocol configured on the interface |
Link interface administrative status | Indicates whether the interface for the member link is administratively enabled (open), meaning that the no ppp shutdown command is operational, or administratively disabled (closed), meaning that the ppp shutdown command is operational |
Link interface fragmentation | Indicates whether MLPPP fragmentation is enabled or disabled on the link interface |
Link interface fragmentation size | MLPPP fragment size, in octets, currently in use on the link interface |
Link interface reassembly | Indicates whether MLPPP reassembly is enabled or disabled on the link interface |
Link interface administrative MRRU | Administrative MRRU value, in octets, currently in use on the link interface |
Interface statistics | |
packets | Number of packets received (in) and sent (out) on the interface |
octets | Number of octets received (in) and sent (out) on the interface |
errors | Number of errors received (in) and sent (out) on the interface |
discards | Number of packets discarded on receipt (in) or discarded before they were transmitted (out) Note: For the LCP, IPCP, and OSINLCP negotiated options, the command displays a value of “none” if the option was not negotiated. |
IPCP protocol configuration | |
configured | IPCP is configured on this interface (true or false) |
administrative- status | IPCP administrative status (open or closed) |
ip-address | Address to be used for negotiation of local IP address option |
dns-precedence | Used to resolve conflicts during DNS address negotiation |
wins-precedence | Used to resolve conflicts during WINS address negotiation |
max-negotiations | Maximum number of renegotiation attempts that the router accepts before terminating a PPP session |
IPCP protocol status | |
operational- status | IPCP operational status (up, down, not present, or not present no resources) |
IPCP negotiated options | |
ip-address | Negotiated IP address for the local and remote (peer) side of the link |
primary-dns-address | Negotiated primary DNS address for the local and remote (peer) side of the link |
secondary-dns-address | Negotiated secondary DNS address for the local and remote (peer) side of the link |
primary-wins-address | Negotiated primary WINS address for the local and remote (peer) side of the link |
secondary-wins-address | Negotiated secondary WINS address for the local and remote (peer) side of the link Note: The command displays a value of “none” for any negotiated option parameters if the option was not negotiated. |
OSINLCP protocol configurations | |
configured | OSINLCPis configured on this interface (true or false) |
administrative -status | OSINLCP administrative status (open or closed) |
OSINLCP protocol status | |
operational-status | OSINLCP operational status (up, down, not present, or not present no resources) |
terminate-reason | Reason for termination of OSINLCP service |
LCP protocol configuration | |
max-receive-unit | Controls negotiation of the local MRU option; value can be one of the following:
|
authentication | Controls negotiation of the local authentication option; value can be one of the following:
|
magic-number | Controls whether the local magic number is negotiated: enabled (negotiate), or disabled (do not negotiate) |
magic-number-mismatch | Indicates whether the router is configured to ignore the LCP peer magic number and retain the PPP connection when the peer has not negotiated an LCP magic number: ignore (ignore the peer magic number mismatch and retain the PPP connection), or reject (router terminates the PPP connection if it detects a peer magic number mismatch) |
keepalive-timer | Rate of LCP echo requests, in seconds |
restart-timer | Retry frequency during LCP, IPCP, and OSINLCP negotiations, in seconds |
max-terminate | Maximum number of terminate requests |
max-configure | Maximum number of configure requests |
max-failure | Maximum number of configure NAKs |
LCP protocol status | |
link-status | Indicates the overall status of LCP negotiations, including the following states: initial (idle), starting (ready to negotiate), authenticate (authenticating), and network (LCP is up) |
LCP negotiated options | |
max-receive-unit | Negotiated maximum receive unit, in octets, for the local and remote (peer) side of the link |
max-receive-reconstruct-unit | Negotiated maximum receive reconstructed unit, in octets, for the local and remote (peer) side of the link |
authentication | Negotiated authentication method (none, pap, or chap) for the local and remote (peer) side of the link |
magic-number | Negotiated magic number for the local and remote (peer) side of the link |
pfc | Negotiated pfc (none or enabled) for the local and remote (peer) side of the link |
acfc | Negotiated acfc (none or enabled) for the local and remote (peer) side of the link Note: The command displays a value of “none” for any negotiated option parameters if the option was not negotiated. |
LCP Endpoint Discriminator options | |
local discriminator class | Endpoint discriminator type, format, and address space for the local system |
local endpoint discriminator | Endpoint discriminator value for the local system within the specified class |
peer discriminator class | Endpoint discriminator type, format, and address space for the remote system |
peer endpoint discriminator | Endpoint discriminator value for the remote system within the specified class |
LCP protocol statistics | |
in-keepalive-requests | Number of received keepalive requests (LCP Echo Request) for the life of the interface (since either system boot or interface creation, whichever is later) |
out-keepalive-requests | Number of transmitted keepalive requests for the life of interface |
in-keepalive-replies | Number of received keepalive replies for the life of the interface |
out-keepalive-replies | Number of transmitted keepalive replies for the life of the interface |
keepalive-failures | Number of keepalive failures reported on the interface |
max-renegotiations-terminates | Number of renegotiation terminations for the PPP session |
IPV6CP protocol configuration | IPV6CP is configured on this interface (true or false) |
Authentication status | |
grant | Authentication status. Possible values are:
|
session-timeout | Session timeout, in seconds; session is terminated at expiration |
inactivity-timeout | Inactivity timeout, in seconds; session is terminated if it is not active for specified timeout |
monitor-ingress-only | Indicates to monitor the ingress interface only |
accounting-timeout | Accounting timeout in seconds; frequency of accounting updates to the authentication server |
peer-ip-address | IPaddress to be used in negotiation of peer IPaddress |
peer-ip-address-mask | IP address mask to be used in negotiation of the peer IP address mask |
peer-primary-dns-address | IP address to be used in negotiation of the peer primary DNS address |
peer-secondary-dns-address | IP address to be used in negotiation of the peer secondary DNS address |
peer-primary-wins-address | IP address to be used in negotiation of the peer primary WINS address |
peer-secondary-wins-address | IP address to be used in negotiation of the peer secondary WINS address |
peer-ipv6-interface-id | IPv6 interface Identifier of the peer returned in an authentication grant from the RADIUS server |
Monitoring MLPPP Summary Information
Purpose
Display a summary of all the multilinked and non-multilinked PPP interfaces configured on the router.
Action
To display a summary of all MLPPP and non-MLPPP interfaces:
host1#show ppp interface summary PPP Status Configuration status configured notConfigured Interface 4000 n/a Ip 4000 0 Ipv6 0 4000 Osi 0 4000 Mpls 0 4000 Administrative status open closed Interface 4000 0 Ip 4000 0 Ipv6 4000 0 Osi 4000 0 Mpls 4000 0 Operational status up down notPresent noResources Interface 4000 0 0 n/a Ip 4000 0 0 0 Ipv6 0 0 4000 0 Osi 0 0 4000 0 Mpls 0 0 4000 0 Operational status lowerDown passive tunnel Interface 0 0 0
PPP Multilink Status Configuration status configured notConfigured Link Interface 8000 n/a Network Interface 2000 n/a Ip 2000 0 Ipv6 0 2000 Osi 0 2000 Mpls 0 2000 Administrative status open closed Link Interface 8000 0 Network Interface 2000 0 Ip 2000 0 Ipv6 2000 0 Osi 2000 0 Mpls 2000 0 Operational status up down notPresent noResources Link Interface 8000 0 0 n/a Network Interface 2000 0 0 n/a Ip 2000 0 0 0 Ipv6 0 0 2000 0 Osi 0 0 2000 0 Mpls 0 0 2000 0 Operational status lowerDown passive tunnel Link Interface 0 0 0 Network Interface 0 0 0
Meaning
Table 30 lists the show ppp interface summary command output fields
Table 30: show ppp interface summary Output Fields
Field Name | Field Description |
|---|---|
PPP status | Non-multilinked PPP interfaces |
Configuration status | Indicates the configuration state of the PPP interface, IPCP, IPv6CP, OSINLCP, or MPLS
|
Administrative status | Indicates the administrative state of the PPP interface, IPCP, IPv6CP, OSINLCP, or MPLS
|
Operational status (Interface) | Indicates the operational state of the PPP interface
|
Operational status (Ip, Ipv6, Osi, Mpls) | Indicates the operational state of the IPCP, IPv6CP, OSINLCP, or MPLS protocol
|
PPP multilink status | Multilinked PPP interfaces |
Hide Navigation Pane
Show Navigation Pane
SHA1
