Monitoring the PPPoE Profile

Purpose

Display information about the profiles configured on the router and detailed information on a specific profile associated with PPPoE interface.

Note: Use the name keyword to display information about a specific profile. Use the brief keyword to display a list of profiles configured on the router.

Action

To display configuration information for a PPPoE profile assigned to a dynamic interface:

host1#show profile name pppoeProfile
Profile                    : pppoeProfile
Unnumbered interface on    : loopback 1
Router                     : default
Directed Broadcast         : Disabled
ICMP Redirects             : Disabled
Access Route Addition      : Enabled
Network Address Translation: Disabled 
Source-Address Validation  : Disabled
Ignore DF Bit              : Disabled
Filter Option Packets      : Disabled
Administrative MTU         : 1500
TCP MSS value              : 0
Inactivity Timer           : Disabled
Route Map Name             : Disabled
Auto Detect                : Disabled
Auto Configure             : Disabled
Append VR Name with DSI    : Enabled
IGMP                       : Enabled
  static-groups            :
  Input policy:  bobb statistics enabled
  Output policy: bobb statistics enabled
PPP Keepalive               : 30
PPP Magic Number            : enabled
PPP Peer DNS Priority       : disabled
PPP Peer WINS Priority      : disabled
PPP Authentication          : pap/chap
PPP Authentication Router   :
PPP Negotiate MRU           : (use lower layer MRU)
PPP Packet Log              : disabled
PPP State Log               : disabled
PPP Chap Challenge Length   : 16 - 32
PPP Passive Mode            : disabled
PPP Multilink               : disabled
PPP IPCP Netmask Option     : disabled
PPP AAA Profile             :
PPP Multilink Fragmentation : disabled
PPP Multilink Fragment Size : (use MTU)
PPP Multilink Reassembly    : disabled
PPP Multilink Mrru          : (use MRU)
PPP Initiate IP                    : disabled
PPP Initiate IPv6                  : disabled
PPPoE Max Sessions          : 2
PPPoE Always-offer          : Disabled
PPPoE Remote-Circuit-Id     : Enabled 
PPPoE Log PPPoeControlPacket: Disabled
PPPoE duplicate-protect     : Enabled
PPPoE ACNAME                : CYM9876
PPPoE URL                   : http://www.urlofinterest.com
PPPoE MOTM                  : goodmorning
PPPoE Service-Name table    : myServiceTable1 


Meaning
 Table 43 lists the show profile command output fields. 
Table 43: show
profile Output Fields
Field Name
Field Description
Profile
Name of the profile
IP address
IP address and subnet mask of the interface, or none
if the interface is unnumbered
Unnumbered interface 
Specifier for the unnumbered interface, or none if the
interface is numbered
Router
Name of the virtual router (VR) assigned to the profile;
interfaces created by the profile are attached to this VR.
Directed Broadcast
Whether the router supports directed broadcast. Possible
values: enabled or disabled
ICMP Redirects
Whether the router accepts ICMP redirects. Possible values:
enabled or disabled
Access Route Addition
Whether the router enables access route additions. Possible
values: enabled or disabled.
Network Address Translation 
Whether the router supports network address translation.
Possible values: enabled or disabled; domain location (inside or outside) 
Source-Address Validation
Router validates the source address associated with the
profile. Possible values: enabled or disabled.
Ignore DF Bit
Router ignores the DF bit. Possible values: enabled or
disabled.
Filter Option Packets 
Router filters out packets with IP options. Possible
values: enabled or disabled. 
Administrative MTU
MTU size configured on the profile
TCP MSS value 
Maximum segment size for TCP SYN packets traveling through
the interface 
Inactivity Timer 
Inactivity timer setting. Possible values: enabled or
disabled.  
Route Map Name
Route map applied to the IP interface subscriber. Possible
values: enabled or disabled.  
Auto Detect 
Router automatically detects packets that do not match
any entries in the demultiplexer table. Possible values: enabled or
disabled.  
Auto Configure 
Dynamic creation of subscriber interfaces on a primary
IP interface. Possible values: enabled or disabled. 
IGMP
Whether the router supports IGMP. Possible values: enabled
or disabled.
static-groups
Displays address of any static groups configured for
IGMP 
Input policy
Name of input policy and whether statistics are enabled
or disabled
Output policy
Name of output policy and whether statistics are enabled
or disabled.
PPP Keepalive 
Keepalive duration, in seconds  
PPP Magic Number
Determines if the PPP magic number was negotiated. Possible
values: enabled or disabled.
PPP Peer DNS Priority
Determines the DNS address that prevails in the event
of a negotiation conflict. Possible values: enabled or disabled.
PPP Peer WINS Priority
Determines the WINS address that prevails in the event
of a negotiation conflict. Possible values: enabled or disabled.
PPP Authentication
Type of authentication configured. Possible values: PAP,
CHAP, or none.
PPP Authentication Router
Name of authentication virtual router.
PPP Negotiate MRU
MRU configured for the profile.
PPP Packet Log
Whether the packet trace log for PPP is configured. Possible
values: enabled or disabled.
PPP State Log
Whether the state trace log for PPP is configured. Possible
values: enabled or disabled.
PPP Chap Challenge Length
Minimum and maximum value of the Chap authenticator challenge
length value.
PPP Passive Mode
Forces the PPP link into passive mode. Possible values:
enabled or disabled.
PPP Multilink
Whether the router supports multilink. Possible values:
enabled or disabled.
PPP IPCP netmask option
Whether the router supports negotiation of the IPCP option
netmask during IPCP negotiation. Possible values: enabled or disabled.
PPP AAA Profile 
AAA profile associated with this PPP interface 
PPP Multilink Fragmentation 
Whether the router supports fragmentation of the PPP
multilink. Possible values: enabled or disabled.  
PPP Multilink Fragment Size 
Multilink fragment size for this PPP interface. 
PPP Multilink Reassembly 
Whether the router supports reassembly of the PPP multilink.
Possible values: enabled or disabled. 
PPP Multilink Mrru 
Multilink MRRU value for this PPP interface
PPP Initiate IP 
Initiation of IPv4 over this PPP interface. Possible
values: enabled or disabled. 
PPP Initiate IPv6 
Initiation of IPv6 over this PPP interface. Possible
values: enabled or disabled. 
PPPoE Max Sessions
Maximum number of PPPoE subinterfaces that can be configured
on an interface
PPPoE Always-offer 
Router offers to set up a session for the client, even
if the router has insufficient resources to establish a session. Possible
values: enabled or disabled. 
PPPoE Remote-Circuit-Id 
The router captures and processes a vendor-specific tag
containing a remote circuit ID transmitted from a digital subscriber
line access multiplexer (DSLAM). Possible values: enabled or disabled. 
PPPoE Log PPPoeControlPacket
Whether the packet trace log for the PPPoE interface
is configured. Possible values: enabled or disabled.
PPPoE duplicate-protect
Whether the router can prevent a client from establishing
more than one session using the same MAC address. Possible values:
enabled or disabled.
PPPoE ACNAME 
Name of the PPPoE access concentrator  
PPPoE URL
URL sent in PADM message to PPPoE clients
PPPoE MOTM
Message of the minute sent in the PADM message to PPPoE
clients
PPPoE Service-Name Table 
Name of the PPPoE service name table, if configured for
the specified profile. 
Related Documentation

						Copyright© 1999-2012 Juniper Networks, Inc. 
							All rights reserved.