Monitoring the PPPoE Interface

Purpose

Display information about the parameters on a PPPoE interface or subinterface as well as the operational and administrative status of all configured PPPoE interfaces.

Note: If you do not specify an interface and subinterface, the router displays the PPPoE interface and status parameters for all configured interfaces. If you specify an interface with no subinterface, the router displays the PPPoE interface and status parameters for that interface. If you specify an interface and subinterface, the router displays detailed parameters available for that subinterface.

Action

To display information about the PPPoE interface over an ATM interface:

host1#show pppoe interface atm 1/0.1 
PPPoE interface ATM 1/0.1 is operStatusUp (dynamic)
    PPPoE interface ATM 1/0.1 has max sessions = 4000
    PPPoE interface ATM 1/0.1 has acName of 111111111111111
    PPPoE interface ATM 1/0.1 will not send ac info in PADS packet 

    PPPoE interface ATM 1/0.1 is in duplicate-protection
    PPPoE interface ATM 1/0.1 will capture remote circuit ID 

    PPPoE interface ATM 1/0.1 has 1 active connections,
        out of 1 configured subinterfaces

Assigned profile (any)        : baseProfile
PPPoE Statistics
  Counters:
    PADI received       0
    PADI transmitted    1
    PADO received       1
    PADO transmitted    0
    PADR received       0
    PADR transmitted    1
    PADS received       1
    PADS transmitted    0
    PADT received       0
    PADT transmitted    0
    PADM received       1
    PADM transmitted    0
    PADN received       0
    PADN transmitted    0
  PAD packets received        2
  PAD packets transmitted     2
  Invalid PAD Packets:
    Invalid Version           0
    Invalid PAD Code          0
    Invalid PAD Tags          0
    Invalid PAD Tag length    0
    Invalid PAD Type          0
    Invalid PADI Session      0
    Invalid PADR Session      0
    Invalid PAD packet length 3
    Invalid PAD packets       0
   Total Invalid PAD packets  3

   Insufficient Resources 0
Lockout Configuration (seconds): Min 5, Max 60 
 Total clients in active lockouts: 0
 Total clients in lockout grace period: 0

To display information about the PPPoE interface over a FastEthernet interface:

host1#show pppoe interface fastEthernet 9/4 
PPPoE interface fastEthernet 9/4 is operStatusUp
    PPPoE interface fastEthernet 9/4 has max sessions = 8000
    PPPoE interface fastEthernet 9/4 has no acName set
    PPPoE interface fastEthernet 9/4 is in test mode
    PPPoE interface fastEthernet 9/4 has 16 active connections,
        out of 16 configured subinterfaces
PPPoE Statistics
  Counters:
    PADI received       0
    PADI transmitted    16
    PADO received       16
    PADO transmitted    0
    PADR received       0
    PADR transmitted    16
    PADS received       16
    PADS transmitted    0
    PADT received       0
    PADT transmitted    0
    PADM received       16
    PADM transmitted    0
    PADN received       16
    PADN transmitted    0
  PAD packets received        32
  PAD packets transmitted     32
  Invalid PAD Packets:
    Invalid Version           0
    Invalid PAD Code          0

To display information about the PPPoE interface with the default MTU value (1494):

host1#show pppoe interface full 
PPPoE interface FastEthernet 2/0 is operStatusUp
    PPPoE interface FastEthernet 2/0 has max sessions = 8000
    PPPoE interface FastEthernet 2/0 mtu 1494
    PPPoE interface FastEthernet 2/0 has no acName set
    PPPoE interface FastEthernet 2/0 autoconfigured subinterfaces
    PPPoE interface FastEthernet 2/0 has 1 active connections,
        out of 1 configured subinterfaces
Assigned profile (any)        : pppoetest
PPPoE Statistics
  Counters:
    PADI received       42
    PADI transmitted    0
    PADO received       0
    PADO transmitted    8
    PADR received       8
    PADR transmitted    0
    PADS received       0
    PADS transmitted    8
    PADT received       0
    PADT transmitted    7
    PADM received       0
    PADM transmitted    0
    PADN received       0
    PADN transmitted    0
  PAD packets received        50
  PAD packets transmitted     23
 
  Invalid PAD Packets:
    Invalid Version           0
    Invalid PAD Code          0
    Invalid PAD Tags          0
    Invalid PAD Tag length    0
    Invalid PAD Type          0
    Invalid PADI Session      0
    Invalid PADR Session      0
    Invalid PAD packet length 0
    Invalid PAD packets       0
   Total Invalid PAD packets  0
 
  Insufficient Resources 0

Lockout Configuration (seconds): Min 10, Max 120 
 Total clients in active lockouts: 0
 Total clients in lockout grace period: 0

To display information about the PPPoE interface with MTU tag:

host1#show pppoe interface full
PPPoE interface FastEthernet 2/0 is operStatusUp
    PPPoE interface FastEthernet 2/0 has max sessions = 8000
    PPPoE interface FastEthernet 2/0 will use tag value for mtu
    PPPoE interface FastEthernet 2/0 has no acName set
    PPPoE interface FastEthernet 2/0 autoconfigured subinterfaces
    PPPoE interface FastEthernet 2/0 has 1 active connections,
        out of 1 configured subinterfaces
Assigned profile (any)        : pppoetest
PPPoE Statistics
  Counters:
    PADI received       44
    PADI transmitted    0
    PADO received       0
    PADO transmitted    10
    PADR received       10
    PADR transmitted    0
    PADS received       0
    PADS transmitted    10
    PADT received       0
    PADT transmitted    9
    PADM received       0
    PADM transmitted    0
    PADN received       0
    PADN transmitted    0
  PAD packets received        54
  PAD packets transmitted     29
 
  Invalid PAD Packets:
    Invalid Version           0
    Invalid PAD Code          0
    Invalid PAD Tags          0
    Invalid PAD Tag length    0
    Invalid PAD Type          0
    Invalid PADI Session      0
    Invalid PADR Session      0
    Invalid PAD packet length 0
    Invalid PAD packets       0
   Total Invalid PAD packets  0
 
  Insufficient Resources 0

Lockout Configuration (seconds): Min 5, Max 60 
 Total clients in active lockouts: 0
 Total clients in lockout grace period: 0

To display information about the operational and administrative status of all configured PPPoE interfaces:

host1:01#show pppoe interface summary
Total PPPoE interfaces: 16

Administrative Status:
                    Up: 15
                  Down: 1

Operational Status:
                    Up: 15
                  Down: 1
        LowerLayerDown: 1
            NotPresent: 0

Meaning

Table 40 lists the show pppoe interface command output fields.

Table 40: show pppoe interface Output Fields

Field Name	Field Description
PPPoE interface	The interface identifier. Note: For more information about specifying the physical interface, see Interface Types and Specifiers in JunosE Command Reference Guide.
Status	Operational status of the interface. Possible values are: operStatusUp—Interface or subinterface is operational Down—Interface or subinterface is not operational LowerLayerDown—Subinterface is not operational because an underlying interface is down
full	Displays configuration, status, and statistics information
max sessions	Configured maximum number of PPPoE sessions
mtu	Maximum transfer unit (MTU) value; when derived from the PPPoE MTU tag, the value can only be determined from an active session.
acName	Name of PPPoE access concentrator
will not send ac info in PADS packet	When the pppoe pads disable-ac-info command is issued, indicates that the router does not send the AC-Name and AC-Cookie tags in the PADS packet.
duplicate-protection	Whether duplicate protection is enabled or disabled for the interface
capture remote circuit id	Whether capture of the PPPoE remote circuit ID sent from the DSLAM is enabled or disabled for the interface
active connections	Number of live PPPoE connections
configured subinterfaces	Number of PPPoE subinterfaces you configured on an interface
Assigned profile	Name of profile assigned to dynamic PPPoE interface
PPPoE Statistics Counter	Number of control packets received or transmitted. Possible values: PADI received/PADI transmitted—Number of initiation control packets received/transmitted PADO received/PADO transmitted—Number of offer control packets received/transmitted PADR received/PADR transmitted—Number of request control packets received/transmitted PADS received/PADS transmitted—Number of session confirmation control packets received/transmitted PADT received/PADT transmitted—Number of termination control packets received/transmitted PADM received/PADM transmitted—Number of message control packets received/transmitted PADN received/PADN transmitted—Number of network control packets received/transmitted
PAD packets received	Total number of control packets received on the interface
PAD packets transmitted	Total number of control packets transmitted on the interface
Invalid PAD Packets	Number of invalid packets received. Packets are considered invalid for various reasons. Possible values: Invalid Version—Number of control packets received with an invalid version Invalid PAD Code—Number of control packets received with an invalid code Invalid PAD Tags—Number of control packets received with invalid tags Invalid PAD Tag length—Number of control packets received with an invalid tag length Invalid PAD Type—Number of control packets received with an invalid type Invalid PADI Session—Number of invalid PPPoE Active Discovery Initiation sessions Invalid PADR Session—Number of invalid PPPoE Active Discovery Request sessions Invalid PAD packet length—Number of control packets received with an invalid packet length Invalid PAD packets—Number of invalid control packets received
Total Invalid PAD packets	Total number of invalid control packets received on the interface
Insufficient Resources	Number of requests denied because of an inadequate number of sessions; check the number of active clients
Lockout Configuration (seconds)	Encapsulation type lockout settings for the PPPoE client associated with the dynamic PPPoE subinterface column. For more information about these fields, see Encapsulation Type Lockout for PPPoE Clients Overview. Possible values include: Min—Minimum lockout time, in seconds Max—Maximum lockout time, in seconds Total clients in active lockouts—Number of PPPoE clients currently undergoing dynamic encapsulation type lockout Total clients in lockout grace period—Number of PPPoE clients currently in a lockout grace period
Summary Statistics	Summary of the PPPoE statistics. Possible value: Total PPPoE interfaces—Number of configured PPPoE interfaces included in summary
Administrative Status	Administrative status of the PPPoE interfaces. Possible values: Up—Number of interfaces not affected by manual administrative intervention Down—Number of interfaces that cannot flow because of manual administrative intervention
Operational Status	Operational status of the PPPoE interfaces. Possible values: Up—Number of interfaces that are operational Down—Number of interfaces that are not operational LowerLayerDown—Number of interfaces that are not operational because an underlying interface is down NotPresent—Number of interfaces that are not operational because hardware is unavailable

Monitoring the PPPoE Interface

Purpose

Action

Meaning

Related Documentation