Enabling Usage of PPPoE Service Name Tables with Static Interfaces over Ethernet

To enable a PPPoE service name table for use with a static interface in PPPoE over Ethernet configurations:

1. Configure a Fast Ethernet, Gigabit Ethernet, or 10-Gigabit Ethernet physical interface.
   host1(config)#interface fastEthernet 4/1
2. Select PPPoE as the encapsulation method on the interface. This command creates the PPPoE major interface.
   host1(config-if)#pppoe
3. Assign the PPPoE service name table to the PPPoE major interface.
   host1(config-if)#pppoe service-name-table myServiceTable1

Related Documentation

• PPPoE Service Name Tables Overview
• Creating and Populating PPPoE Service Name Tables
• Enabling Usage of PPPoE Service Name Tables with Static Interfaces over ATM
• Enabling Usage of PPPoE Service Name Tables with Dynamic Interfaces
• Monitoring the PPPoE Service Name Table
• interface fastEthernet
• interface gigabitEthernet
• interface tenGigabitEthernet
• pppoe
• pppoe service-name-table