Configuring a QoS Adjustment Factor Applied to the ANCP Reported Data Rate

You can configure a QoS adjustment factor that is applied to the upstream data rate and downstream data rate reported by ANCP for a DSL type. The adjustment factor is used to generate an accurate QoS shaping rate. The factor is applied for all subscribers that use the specified DSL line type.

To configure a QoS adjustment factor that is applied to the upstream and downstream data rates reported by ANCP for a DSL type:

• From L2C Configuration mode, configure a QoS adjustment factor to be applied for all subscribers that use the specified DSL line type.
  host1(config-l2c)#adjustment-factor adsl1 45 host1(config-l2c)#adjustment-factor adsl2 55 host1(config-l2c)#adjustment-factor adsl2+ 67 host1(config-l2c)#adjustment-factor vdsl 91 host1(config-l2c)#adjustment-factor vdsl2 55 host1(config-l2c)#adjustment-factor sds 12

You can use the no version to restore the default condition, wherein no adjustment factor is applied to the ANCP-reported value. This command has the same effect as applying an adjustment factor of 100 to a DSL line type.

Related Documentation

• Adjusting the Data Rate Reported by ANCP for DSL Lines Overview
• Monitoring Configured Values for the Adjustment Rate
• adjustment-factor