Hide Navigation Pane
Show Navigation Pane
Download
SHA1
Configuring ANCP
ANCP uses several global-level configuration commands to enable ANCP to function on the router. Tasks to configure ANCP are:
- Creating a Listening TCP Socket for ANCP
- Accessing L2C Configuration Mode for ANCP
- Defining the ANCP Session Timeout
- Learning the Access Node Partition ID
Creating a Listening TCP Socket for ANCP
You can create a listening TCP socket for ANCP. ANCP monitors port 6068 for ANCP TCP connection requests.
To create a listening TCP socket in the current virtual router context:
- Issue the l2c ip listen command
in Global Configuration mode.host1(config)#l2c ip listen
You can use the no version to remove the listening TCP socket and stop any new sessions from being established. The no version does not terminate any existing GSMP sessions.
Accessing L2C Configuration Mode for ANCP
You can launch the L2C Configuration (config-l2c) mode for ANCP. In this mode, you can define session timeout values and access the L2C Neighbor Configuration mode to configure an ANCP neighbor.
To launch the L2C Configuration (config-l2c) mode for ANCP:
- Issue the l2c command in Global
Configuration mode.host1(config)#l2c host1(config-l2c)#
You can use the no version to remove all ANCP configurations.
Defining the ANCP Session Timeout
You can specify the ANCP session timeout value in L2C Configuration (config-l2c) mode. The timer range is 1–25 seconds with a default value of 25 seconds.
To define the ANCP session timeout value (in seconds):
- Issue the session-timeout command
in L2C Configuration (config-l2c) mode.host1(config-l2c)#session-timeout 10
You can use the no version to revert the session timeout to its default setting, 25 seconds.
Learning the Access Node Partition ID
You can enable the learning option in L2C Configuration (config-l2c) mode. This learning option in the virtual router enables network access server to learn the partition ID from all the access nodes.
To enable the learning option in ANCP:
- Issue the wait-for-gsmp-syn command in L2C Configuration (config-l2c) mode.(config-l2c)# wait-for-gsmp-syn
You can use the no version to disable the learning option in ANCP.
If the access node does not send the GSMP_SYN message after initiating the TCP session, the connection is lost because the session timer expires. To avoid this, you can use the gsmp-syn-timeout command to specify the timeout value in L2C Configuration (config-l2c) mode. The timer value cannot be more than the ANCP session timeout value with a default value of 60 seconds.
- Issue the gsmp-syn-timeout command
in L2C Configuration (config-l2c) mode.(config-l2c)# gsmp-syn-timeout 10
You can use the no version to revert the session timeout to its default setting, 60 seconds.
