Monitoring IPv6 UDP Statistics

Display IPv6 UDP statistics.

You must configure an IPv6 license using the license ipv6 command before using the IPv6 routing protocol configuration commands on the E Series router.
All IPv6 routing protocol-related configurations are removed from the virtual router when you issue the no ipv6 command.

To display IPv6 UDP statistics:

host1#show ipv6 udp statistics
UDP Statistics:
  Rcvd: 0 total, 0 checksum errors, 0 no port
  Sent: 0 total, 0 errors

Table 46 lists the show ipv6 udp statistics command output fields.

Table 46: show ipv6 udp statistics Output Fields

Field Name	Field Description
Rcvd	total—Total number of received packets checksum errors—Checksum error packets received no port—No port error packets received
Sent	errors—Error packets received total—Total number of received packets