Hide Navigation Pane
Show Navigation Pane
Download
SHA1
Monitoring RSVP-TE Interfaces Where BFD is Enabled
Purpose
Display information about RSVP-TE major interfaces on which BFD is enabled.
For point-to-point interfaces, this command displays a single secure association with the single peer at the remote end. For multiaccess type interfaces (Ethernet), this command displays, if present, multiple secure associations from the various RSVP speakers.
Action
To display information about RSVP-TE major interfaces on which BFD is enabled:
host1#show mpls rsvp bfd interfaces
Bfd Enabled RSVP interfaces
---------------------------
Minimum Minimum Minimum
Interface Interval Rx-Interval Tx-Interval Multiplier
--------- -------- ----------- ----------- ----------
ATM2/0.1 300 300 300 3Meaning
Table 84 lists the show mpls rsvp bfd interfaces command output fields.
Table 84: show mpls rsvp bfd interfaces Output Fields
Field Name | Field Description |
|---|---|
Interface | RSVP-TE major interface on which BFD is enabled |
Minimum Interval | Minimum interval in milliseconds, used when the minimum receive interval and minimum transmit intervals have the same value |
Minimum Rx-Interval | Minimum receive interval in milliseconds; minimum interval at which the local peer must receive BFD control packets from the remote peer |
Minimum Tx-Interval | Minimum transmit interval in milliseconds; interval at which the local peer proposes to transmit BFD control packets to the remote peer |
Multiplier | Detection multiplier value; roughly equivalent to the number of packets that can be missed before the BFD session is declared to be down |
