Hide Navigation Pane
Show Navigation Pane
Download
SHA1
Monitoring the Configuration of an ICR Partition Attached to an Interface
Purpose
Display information about the ICR partition configured on an interface.
Action
host1#show icr-partition fastEthernet 3/5/0.1 1 ICR Partition ID: part1A ICR Partition State: Master ICR Partition Grouping Criterion: SVLAN
SVLAN VLAN control-interface vrrp-mac advertise-mac ----------------------------------------------------------------------- 100 Any enabled disabled enabled 101 Any enabled disabled disabled 102 Any enabled disabled disabled 103 Any enabled disabled disabled 104 Any enabled disabled disabled 105 Any enabled disabled disabled 106 Any enabled disabled disabled 107 Any enabled disabled disabled 108 Any enabled disabled disabled 109 Any enabled disabled disabled ----------------------------------------------------------------------- ICR Partition has 10 group members.
Meaning
Table 30 lists the show icr-partition command output fields.
Table 30: show icr-partition Output Fields
Field Name | Field Description |
|---|---|
ICR Partition ID | Identifier for the ICR partition. |
ICR Partition State | State of the ICR partition:
Note: The state of the ICR partition depends on the associated VRRP instance. |
ICR Partition Grouping Criterion | Grouping option for the subscribers. Possible options: S-VLAN and VLAN. The default grouping option is S-VLAN. |
SVLAN | S-VLAN identifier for the interface. |
VLAN | VLAN identifier for the interface. Any indicates that the VLAN ID is a wildcard and you can specify any configured VLAN ID with the associated S-VLAN ID. |
control-interface | Controls the state of the corresponding subinterfaces (up/AdminDown) based on the state of the partition (master or backup). If the subinterfaces are part of the backup partition, the router changes the state of all the subinterfaces to AdminDown. You can also block all traffic on the backup partition. However, the router does not block VRRP advertisements as long as VRRP is running on a separate interface. Possible states: enabled or disabled. If the status is enabled, the router changes the state of the subinterface based on the state of the partition. If the status is disabled, the router does not control the state of the corresponding subinterface. |
vrrp-mac | Configures the interface to use the default MAC address instead of the VRRP MAC address. Possible states: enabled or disabled. If the status is enabled, the interface uses the VRRP MAC address; otherwise, the interface uses the default MAC address. |
advertise-mac | Enables the interface to transmit GARP advertisements when the partition moves from backup state to master state. Possible states: enabled or disabled. If the status is enabled, the interface transmits GARP advertisements; otherwise, the interface does not transmit GARP advertisements. |
