Creating Parameter Instances
You can create QoS parameter instances globally, for an interface, or for a subinterface.
Tasks to create parameter instances are:
- Creating a Global Parameter Instance
- Creating a Parameter Instance for an Interface
- Creating a Parameter Instance for an ATM VP
- Creating a Parameter Instance for an S-VLAN
Creating a Global Parameter Instance
To create a global parameter instance:
- Create a parameter instance in Global Configuration mode.host1(config)#qos-parameter max-subscriber-bandwidth 6000000
Creating a Parameter Instance for an Interface
To create a parameter instance for an interface:
- Specify an interface.host1(config)#interface atm 11/0.1 host1(config)#interface gigabitEthernet 2/0
- Specify the parameter name and the value.host1(config-subif)#qos-parameter max-subscriber-bandwidth 6000000
Creating a Parameter Instance for an ATM VP
Use this procedure to attach a parameter instance to a VP on the interface. Optionally, use the qos-profile keyword to attach a parameter instance to a QoS profile.
To create a parameter instance for an ATM VP:
- Configure the ATM VP.host1(config)#interface atm 2/0 host1(config-if)#atm vp-tunnel 4
- Do either of the following:
- Attach the parameter instance to an ATM VP on the interface.host1(config-if)#atm-vp 4 qos-parameter max-subscriber-bandwidth 375000
- Attach the parameter instance and associate with the QoS
profile. host1(config-if)#atm-vp 4 qos-profile video qos-parameter max-subscriber-bandwidth 375000
- Attach the parameter instance to an ATM VP on the interface.
Creating a Parameter Instance for an S-VLAN
Use this procedure to attach a parameter instance to a specified S-VLAN ID on the interface. Optionally, use the qos-profile keyword to attach a parameter instance to a QoS profile.
To create a parameter instance for an S-VLAN:
- Specify the Ethernet interface and create the VLAN. host1(config)#interface gigabitEthernet 3/0 host1(config-if)#encapsulation vlan host1(config-if)#interface gigabitEthernet 3/0.1
- Specify the S-VLAN ID. host1(config-if)#svlan id 1 202
- Attach the parameter instance to an S-VLAN ID on the interface.host1(config-if)#svlan 202 qos-parameter max-subscriber-bandwidth 6000000
Related Documentation
- Parameter Instances for QoS Clients Overview
- JunosE Broadband Access Configuration Guide
- atm-vp qos-parameter
- atm vp-tunnel
- encapsulation vlan
- interface
- qos-parameter
- svlan id
- svlan qos-parameter
Hide Navigation Pane
Show Navigation Pane
SHA1