Scenarios for the Detection of Corruption in the FPGA Statistics and the Determination of the Threshold

This section describes scenarios for the detection of corruption in the FPGA statistics and the determination of the threshold:

When a bit flip occurs in policy counters
When a bit flip occurs in interface counters
When a policy is reattached to an interface
When a bit flip occurs when a policy is attached to an interface for the first time

Bit Flip in Policy Counters

When a bit flip occurs in policy counters, the sum of the policy counters in different classifier groups is larger than the interface counter value. If the difference is greater than or equal to the configured threshold value, corruption in the FPGA statistics is detected.

Table 31: Interface and Policy Statistics When a Bit Flip Occurs in Policy Counters

Interval	Interface Counter	Policy Sum	Policy counter1	Policy counter2
Initial	0	0	0	0
Interval 1	1100	1100	100	1100
Interval 2	2200	1,000,002,200	1,000,000,200	2000

Bit Flip in Interface Counters

When a bit flip occurs in interface counters, the interface counter value is larger than the sum of the policy counters in different classifier groups. If the difference is greater than or equal to the configured threshold value, corruption in the FPGA statistics is detected.

Table 32: Interface and Policy Statistics When a Bit Flip Occurs in Interface Counters

Interval	Interface counter	Policy Sum	Policy counter1	Policy counter2
Initial	0	0	0	0
Interval 1	1100	1100	100	1000
Interval 2	1,000,002,200	2200	200	2000

Reattachment of a Policy to an Interface

Consider a scenario in which a policy is reapplied to an interface either because of a fast or a full resynchronization of the SRC server or because of a previously attached policy being removed and reapplied to the interface. In this case, the policy counters are reinitialized to 0, and the sum of policy counters in different classifier groups is less than the interface counters. If the difference is greater than or equal to the configured threshold value, corruption in the FPGA statistics is detected.

Table 33: Interface and Policy Statistics When a Policy is Reapplied to an Interface

Interval	Interface Counter	Policy Sum	Policy counter1	Policy counter2
Initial	0	0	0	0
Interval 1	1100	1100	100	1000
Interval 2	2200	0	0	0
Interval 3	3300	1100	100	1000

Bit Flip in Policy Counters When a Policy is Attached to an Interface for the First Time

In this scenario, a bit flip occurs in the policy statistical counter at the time of attachment of a policy to an interface. In such scenarios, the policy counters are larger than the interface counters even when the policy is applied for the first time. If the difference between policy and interface counters over polling intervals is greater than or equal to the configured threshold value, corruption in the FPGA statistics is detected.

Table 34: Interface and Policy Statistics When a Bit Flip Occurs when a Policy is Attached to an Interface for the First Time

Interval	Interface Counter	Policy Sum	Policy counter1	Policy counter2
Initial	0	1,000,000,000	1,000,000,000	0
Interval 2	1,100	1,000,001,100	1,000,000,100	1000
Interval 3	2200	1,000,002,200	1,000,000,200	2000

Scenarios for the Detection of Corruption in the FPGA Statistics and the Determination of the Threshold

Bit Flip in Policy Counters

Bit Flip in Interface Counters

Reattachment of a Policy to an Interface

Bit Flip in Policy Counters When a Policy is Attached to an Interface for the First Time

Related Documentation