Hide Navigation Pane
Show Navigation Pane
Download
SHA1
Monitoring the Policy Configuration of Frame Relay Subinterfaces
Purpose
Display information about a subinterface’s Frame Relay policy lists.
Action
To display information about Frame Relay policy lists:
host1#show frame-relay subinterface
Frame relay sub-interface SERIAL5/0:1/1.1, status is up
Number of sub-interface down transitions is 0
Time since last status change 03:04:59
No baseline has been set
In bytes: 660 Out bytes: 660
In frames: 5 Out frames: 5
In errors: 0 Out errors: 0
In discards: 0 Out discards: 0
In unknown protos: 0
Frame relay policy output frOutputPolicy
classifier-group frGroupA entry 1
5 packets, 640 bytes
mark-de 1
Frame relay sub-interface SERIAL5/1:1/1.1, status is up
Number of sub-interface down transitions is 0
Time since last status change 03:05:09
No baseline has been set
In bytes: 660 Out bytes: 660
In frames: 5 Out frames: 5
In errors: 0 Out errors: 0
In discards: 0 Out discards: 0
In unknown protos: 0
Frame relay policy input frInputPolicy
classifier-group frMatchDeSet entry 1
5 packets, 660 bytes
color redMeaning
Table 38 lists the show frame-relay subinterface command output fields.
Table 38: show frame-relay subinterface Output Fields
Field Name | Field Description |
|---|---|
Frame Relay policy | Type and name of the VLAN policy |
mark-de | DE bit value |
color | Color applied to packet flow for queuing: green, yellow, or red |
classifier-group | Name of the classifier control list used by the policy |
filter | Filter policy action |
forward | Forward policy action |
traffic class | Traffic class in the policy list |
user-packet-class | User packet class in the policy list |
