List of Tables

Table 1: Notice Icons
Table 2: Text and Syntax Conventions
Table 3: CLACL Criteria
Table 4: Policy Rule Commands and Precedence
Table 5: Ascend-Data-Filter Fields
Table 6: Ascend-Data-Filter Attribute for an Input Policy on an IPv4 Interface
Table 7: Ascend-Data-Filter Attribute Values for a RADIUS Record
Table 8: Ascend-Data-Filter Attribute for an Output Policy on an IPv6 Interface
Table 9: Ascend-Data-Filter Attribute for an Input Policy on an IPv6 Interface
Table 10: TCP-Friendly One-Rate Rate-Limit Profile Algorithms
Table 11: Policy Action Applied Based on Rate Settings and Traffic Rate
Table 12: Two-Rate Rate-Limit Profile Algorithms
Table 13: One-Rate Rate-Limit-Profile Defaults
Table 14: Two-Rate Rate-Limit-Profile Defaults
Table 15: Input Action and Secondary Input Actions
Table 16: Shorthand Notation Mapping
Table 17: Classifier Support (OC48/STM16, GE-2, and GE-HDE Line Modules)
Table 18: Classifier Support (All Line Modules Except OC48/STM16, GE-2, and GE-HDE)
Table 19: Size Limit of Individual IP Classifiers
Table 20: Size Limit of Combined IP Classifiers
Table 21: Size Limit of Individual IPv6 Classifiers
Table 22: Size Limit of Combined IPv6 Classifiers
Table 23: Classification Fields for Example 1
Table 24: Classification Fields for Example 2
Table 25: IPv6 Classification Fields for a 144-bit CAM Entry
Table 26: IPv6 Classification Fields for a 288-bit CAM Entry
Table 27: IPv6 Classification Fields for a 576-bit CAM Entry
Table 28: Maximum Policies with One Classifier per Policy for GE-2 LMs
Table 29: Maximum Policies with Four Classifiers per Policy for GE-2 LMs
Table 30: Resource Consumption
Table 31: Interface and Policy Statistics When a Bit Flip Occurs in Policy Counters
Table 32: Interface and Policy Statistics When a Bit Flip Occurs in Interface Counters
Table 33: Interface and Policy Statistics When a Policy is Reapplied to an Interface
Table 34: Interface and Policy Statistics When a Bit Flip Occurs when a Policy is Attached to an Interface for the First Time
Table 35: show atm subinterface Output Fields
Table 36: show classifier-list Output Fields
Table 37: show control-plane policer Output Fields
Table 38: show frame-relay subinterface Output Fields
Table 39: show gre tunnel Output Fields
Table 40: show interfaces Output Fields
Table 41: show ip interfaces Output Fields
Table 42: show ipv6 interface Output Fields
Table 43: show mpls l2transport interface Output Fields
Table 44: show parent-group Output Fields
Table 45: show policy-list Output Fields
Table 46: show policy-parameter Output Fields
Table 47: show rate-limit-profile Output Fields
Table 48: show vlan subinterface Output Fields
Table 49: show fpga-stats-monitoring Output Fields
Table 50: Packet-Mirroring Terminology
Table 51: Commands Made Visible by the mirror-enable Command
Table 52: Setting Up the CLI-Based Packet-Mirroring Environment
Table 53: CLI-Based User-Specific Mirroring During Session Start
Table 54: CLI-Based Mirroring of Currently Running Session
Table 55: RADIUS Attributes Used as Packet Mirroring Triggers (Vendor ID 4874)
Table 56: RADIUS Attributes Used as Packet Mirroring Triggers (Vendor ID 3561)
Table 57: RADIUS-Based Mirroring Attributes
Table 58: Setting Up the RADIUS-Based Packet-Mirroring Environment
Table 59: RADIUS-Based Mirroring During Session Start (User-Initiated)
Table 60: RADIUS-Based Mirroring of Currently Running Session (RADIUS-Initiated)
Table 61: Prepended Header Field Descriptions
Table 62: Packet-Mirroring SNMP Traps
Table 63: Packet-Mirroring Traps for CALEA Compliance
Table 64: Packet Mirroring Trap Severity Levels
Table 65: show ip interface Output Fields
Table 66: show ip mirror interface Output Fields
Table 67: show mirror log Output Fields
Table 68: show mirror rules Output Fields
Table 69: show mirror subscribers Output Fields
Table 70: show radius dynamic-request statistics Output Fields
Table 71: show secure classifier-list Output Fields
Table 72: show secure policy-list Output Fields
Table 73: show mirror log Output Fields
Table 74: show snmp trap Output Fields
Table 75: show snmp secure-log Output Fields