ipv6

Syntax

[ no ] ipv6

Release Information

Command introduced before JunosE Release 7.1.0.

Description

Enables an IPv6 instance on a router that does not already have an explicit IPv6 address. Normally, performing any IPv6 configuration automatically enables IPv6 on the interface. The no version disables IPv6 on the router.

Note: Disabling IPv6 on the router causes only the IPv6 routing protocol-related configurations to be removed. The previously configured IPv6 policy settings, such as policy lists, classifier lists, and rate-limit profiles, and local address pools for IPv6 subscribers are not removed because these parameters can be configured without configuring an IPv6 license.

Mode

Global Configuration