debug ip rip

Syntax

debug ip rip ripLog [ severity { severityValue | severityNumber } ]
[ verbosity verbosityLevel ]

no debug ip rip ripLog

Release Information

Command introduced before JunosE Release 7.1.0.

Description

Shows information about the selected variable. The no version disables the display.

Options

• ripLog—RIP log of interest; one of the following options:
  • events—General RIP events, such as removing RIP from an interface or creating the RIP process
  • route—Events associated with two RIP routers exchanging routes
• severity—Specifies the minimum severity of the log messages displayed for the selected category; described either by a descriptive term—severityValue—or by a corresponding number—severityNumber—in the range 0–7; the lower the number, the higher the priority:
  • emergency or 0—System unusable
  • alert or 1—Immediate action needed
  • critical or 2—Critical condition exists
  • error or 3—Error condition
  • warning or 4—Warning condition
  • notice or 5—Normal but significant condition
  • info or 6—Informational message
  • debug or 7—Debug message
• verbosityLevel—Verbosity of the log category's messages; can be any of the following:
  • low—Terse
  • medium—Moderate detail
  • high—Verbose

Mode

Privileged Exec