debug ip ospf

debug ip ospf ospfLog [ severity { severityValue | severityNumber } ]
[ verbosity verbosityLevel ]

no debug ip ospf ospfLog

Command introduced before JunosE Release 7.1.0.

Shows information about the selected variable. The no version disables the display.

ospfLog—OSPF log of interest; one of the following options:
- adj—OSPF adjacency events
- elect-dr—OSPF designated router election
- events—OSPF general events
- lsa—OSPF link-state advertisements events
- neighbor—OSPF neighbor state machine
- packets-rcvd—OSPF packets received
- packets-sent—OSPF packets sent
- route—OSPF route events
- spf—All OSPF shortest path first calculation events
- spf-ext—OSPF shortest path first external route calculation events
- spf-inter—OSPF shortest path first interarea route calculation events
- spf-intra—OSPF shortest path first intra-area route calculation events
severity—Specifies the minimum severity of the log messages displayed for the selected category; described either by a descriptive term—severityValue—or by a corresponding number—severityNumber—in the range 0–7; the lower the number, the higher the priority:
- emergency or 0—System unusable
- alert or 1—Immediate action needed
- critical or 2—Critical condition exists
- error or 3—Error condition
- warning or 4—Warning condition
- notice or 5—Normal but significant condition
- info or 6—Informational message
- debug or 7—Debug message
verbosityLevel—Verbosity of the log category's messages; can be any of the following:
- low—Terse
- medium—Moderate detail
- high—Verbose

Privileged Exec