data-character-bits

Syntax

data-character bits { 7 | 8 }

Release Information

Command introduced before JunosE Release 7.1.0.

Description

Sets the number of data bits available for characters for all sessions on the specified vty lines. There is no no version.

Options

• 7—Specifies 7 data bits per character; this setting supports only characters in the standard ASCII set
• 8—Specifies 8 data bits per character; default setting, supports the full set of 8-bit international characters

  Note: You should be sure that the software on other devices in the network also supports international characters.

Mode

Line Configuration