clear ip bgp wait-end-of-rib

Syntax

Release Information

Command introduced before JunosE Release 7.1.0.
l2vpn keyword added in JunosE Release 7.1.0.
ipv6Address variable added in JunosE Release 8.0.0.
route-target signaling keywords added in JunosE Release 8.2.0.
all, vpls, and vpws keywords and vplsName and vpwsName variables added in JunosE Release 9.3.0.

Description

Brings down the underlying TCP connection and then brings it back up again, causing both peers to resend their complete BGP routing table, but clears the specified peer from the set of peers for which BGP is waiting to receive an End-of-RIB marker after a peer restart. Hard clearing a peer has the same effect for that peer. There is no no version.

Options

ipAddress—IP address of identified BGP neighbor to clear
ipv6Address—IPv6 address of identified BGP neighbor to clear
peerGroupName—Name of a BGP peer group to clear
*—Clears all connections
vrfName—Name of a virtual routing and forwarding instance to clear
ipv4 unicast—Clears the IPv4 unicast routing table; the default option
ipv4 multicast—Clears the IPv4 multicast routing table
vpnv4 unicast—Clears the VPNv4 unicast routing and forwarding table
l2vpn all—Clears the L2VPN reachability information for all VPLS and VPWS instances in the L2VPN address family
l2vpn vpls vplsName—Clears the L2VPN reachability information for the VPLS instance with the name vplsName
l2vpn vpws vpwsName—Clears the L2VPN reachability information for the VPWS instance with the name vpwsName
route-target signaling—Clears the route-target membership information

Mode

Privileged Exec