RADIUS IETF Attributes Supported for Subscriber AAA Access Messages
Table 43 lists the Access-Request, Access-Accept, Access-Reject, Access-Challenge, CoA, and Disconnect-Request attributes supported by JunosE Software. The following notes are referenced in Table 43:
- Attribute is used by Access-Request messages when terminating a PPP connection at the LNS or the initiating LAC.
- Attribute is used to support pass-through exchange of EAP messages.
- Attribute is used by Access-Challenge messages to set the PPP retransmission timeout used for EAP request packets.
Table 43 lists the RADIUS IETF attributes supported for Access-Request, Access-Accept, Access-Reject, CoA-Request, and Disconnect-Request messages.
Table 43: AAA Access Message RADIUS IETF Attributes Supported
Attribute Number | Attribute Name | Access- Request | Access- Accept | Access- Reject | Access- | CoA- | Disconnect- |
|---|---|---|---|---|---|---|---|
[1] | User-Name | ✓ | ✓ | – | – | ✓ | ✓ |
[2] | User-Password | ✓ | – | – | – | – | – |
[3] | CHAP-Password | ✓ | – | – | – | – | – |
[4] | NAS-IP-Address | ✓ | – | – | – | – | – |
[5] | NAS-Port | ✓ | – | – | – | – | – |
[6] | Service-Type | ✓ | ✓ | – | – | – | – |
[7] | Framed-Protocol | ✓ | ✓ | – | – | – | – |
[8] | Framed-IP-Address | ✓ | ✓ | – | – | ✓ | – |
[9] | Framed-IP-Netmask | – | ✓ | – | – | – | – |
[11] | Filter-Id | – | ✓ | – | – | – | – |
[12] | Framed-MTU | ✓ | ✓ | – | – | – | – |
[18] | Reply-Message | – | ✓ | ✓ | ✓ | – | – |
[22] | Framed-Route | – | ✓ | – | – | – | – |
[24] | State | – | – | ✓ | ✓ | – | – |
[25] | Class | – | ✓ | – | – | – | – |
[27] | Session-Timeout (See Note 3.) | – | ✓ | ✓ | ✓ | – | – |
[28] | Idle-Timeout | – | ✓ | – | – | – | – |
[30] | Called-Station-Id | ✓ | – | – | – | – | – |
[31] | Calling-Station-Id | ✓ | – | – | – | ✓ | – |
[32] | NAS-Identifier | ✓ | – | – | – | – | – |
[33] | Proxy-State | ✓ | – | – | – | – | – |
[44] | Acct-Session-Id | ✓ | – | – | – | ✓ | ✓ |
[50] | Acct-Multi-Session-Id | ✓ | – | – | – | – | ✓ |
[60] | CHAP-Challenge | ✓ | – | – | – | – | – |
[61] | NAS-Port-Type | ✓ | – | – | – | – | – |
[62] | Port-Limit | – | ✓ | – | – | – | – |
[64] | Tunnel-Type | ✓ | ✓ | – | – | – | – |
[65] | Tunnel-Medium-Type | ✓ | ✓ | – | – | – | – |
[66] | Tunnel-Client-Endpoint | ✓ | ✓ | – | – | – | – |
[67] | Tunnel-Server-Endpoint | ✓ | ✓ | – | – | – | – |
[68] | Acct-Tunnel-Connection | ✓ | – | – | – | – | – |
[69] | Tunnel-Password | – | ✓ | – | – | – | – |
[77] | Connect-Info | ✓ | – | – | – | – | – |
[79] | EAP-Message | ✓ | ✓ | ✓ | ✓ | – | – |
[80] | Message-Authenticator | ✓ | ✓ | ✓ | ✓ | – | – |
[82] | Tunnel-Assignment-Id | – | ✓ | – | – | – | – |
[83] | Tunnel-Preference | – | ✓ | – | – | – | – |
[85] | Acct-Interim-Interval | – | ✓ | – | – | – | – |
[87] | NAS-Port-Id | ✓ | – | – | – | ✓ | – |
[88] | Framed-Pool | – | ✓ | – | – | – | – |
[90] | Tunnel-Client-Auth-Id | ✓ | ✓ | – | – | – | – |
[91] | Tunnel-Server-Auth-Id | ✓ | ✓ | – | – | – | – |
[96] | Framed-Interface-Id | – | ✓ | – | – | – | – |
[97] | Framed-Ipv6-Prefix | – | ✓ | – | – | – | – |
[99] | Framed-Ipv6-Route | – | ✓ | – | – | – | – |
[100] | Framed-IPv6-Pool | – | ✓ | – | – | – | – |
[101] | Error-Cause | – | – | – | – | ✓ | ✓ |
[123] | Delegated-IPv6-Prefix | – | ✓ | – | – | – | – |
[135] | Ascend-Primary-Dns | – | ✓ | – | – | – | – |
[136] | Ascend-Secondary-Dns | – | ✓ | – | – | – | – |
[144] | DS-Lite-Tunnel-Name | – | ✓ | – | – | – | – |
[188] | Ascend-Num-In-Multilink | ✓ | – | – | – | – | – |
[242] | Ascend-Data-Filter | – | ✓ | – | – | – | – |
Hide Navigation Pane
Show Navigation Pane
SHA1