Hide Navigation Pane
Show Navigation Pane
Download
SHA1
Monitoring Configured Destination Profiles or Host Profiles
Purpose
Display either a list of configured L2TP destination profiles or the host profiles defined in a particular profile.
If a nondefault L2TP RWS is configured for a particular host profile, the command displays the RWS setting as an attribute of that host profile. (See Example 2.)
Action
To display either a list of configured L2TP destination profiles or the host profiles defined in a particular profile:
host1#show l2tp destination profile L2TP destination profile westford 1 L2TP destination profile found
If a nondefault L2TP RWS is configured for a particular host profile, to display the RWS setting as an attribute of that host profile:
host1#show l2tp destination profile westford
L2TP destination profile westford
Configuration
Destination address
Transport ipUdp
Virtual router lns
Peer address 192.168.1.99
Destination profile maximum sessions is 5000
Current session count in group-A is 14, max-sessions configured is 3400
Current session count in group-B is 2, max-sessions configured is 4600
Statistics
Destination profile current session count is 30
Host profile attributes
Remote host is remhost22.xyz.com
Configuration
Tunnel password is 23erf5
Interface profile is ebcints
Bundled group id is 1
Bundled group id override is enabled
Maximum sessions is 400
Failover resync is failover-protocol
Sessions-limit-group is group-A
Statistics
Current session count is 14
Remote host is asciitext
Configuration
Bundled group id is 0
Tunnel password is 222
Interface profile is ascints
Default upper binding type mlppp
Maximum sessions is 250
Failover resync is failover-protocol
Sessions-limit-group is group-B
Statistics
Current session count is 2
Remote host is mexico
Configuration
Local ip address is 10.10.2.2
Proxy lcp is disabled
Proxy authenticate is enabled
mlppp upper binding type
Disconnect-cause avp is enabled
Receive window size is 4
Maximum sessions is 500
Failover resync is failover-protocol
Statistics
Current session count is 14
Remote host is LAC
Configuration
Tunnel password is TunnelPass
Local host name is LNS
Local ip address is 46.1.1.2
Disconnect-cause avp is enabled
Tunnels are single-shot
Override out-of-resource-result-code is enabled
Statistics
Current session count is 0
5 L2TP host profiles foundMeaning
Table 95 lists the show l2tp destination profile command output fields.
Table 95: show l2tp destination profile Output Fields
Field Name | Field Description |
|---|---|
Destination profile attributes | Destination profile attributes of L2TP destination |
Transport | Method used to transfer traffic |
Virtual Router | Method used to transfer traffic |
Peer address | IP address of the LAC |
Destination profile maximum sessions | Maximum number of sessions allowed for the destination profile |
Destination profile current session count | Number of current sessions for the destination profile |
Host profile attributes | Host profile attributes of L2TP destination |
Remote host | Name of the remote host |
Local hostname | Name of the local host |
Local IP address | IP address of the local host |
Bundled group id | Identifier for bundled sessions |
Tunnel password | Password for the tunnel |
Interface profile | Name of the host profile |
Proxy lcp | Status of proxy LCP for the remote host |
mlppp upper binding type | Default upper binding type |
Disconnect-cause avp generation | Status of the disconnect cause generation |
Receive window size | Number of packets that the peer can transmit without receiving an acknowledgment from the router |
Maximum sessions | Maximum number of sessions allowed for the host profile |
Failover resync | L2TP peer resynchronization method for the host profile |
Override out-of-resource-result-code | State of result code override, enabled or disabled |
Current session count | Number of current sessions for the host profile |
Sessions-limit-group | Name of the session limit group |
