Additional Comments
800 characters remaining
May we contact you if necessary?
JunosE Software Documentation for E Series Broadband Services Routers, Release 13.2
L2TP Overview
L2TP Terminology
Packet Fragmentation
Implementing L2TP
Overriding LNS Out-of-Resource Result Codes 4 and 5
L2TP Module Requirements
L2TP Platform Considerations
L2TP References
Sessions and Tunnels Supported
Stateful Line Module Switchover Platform Considerations
Managing L2TP Destinations, Tunnels, and Sessions
Application Support for Stateful Line Module Switchover
VSAs for Dynamic IP Interfaces Overview
Overview of Mapping Application Terminate Reasons and RADIUS Terminate Codes
PPP Accounting Statistics
L2TP Dial-Out Overview
L2TP Dial-Out Platform Considerations
L2TP Dial-Out References
L2TP Dial-Out Network Model
L2TP Dial-Out Process
L2TP Dial-Out Operational States
L2TP Dial-Out Outgoing Call Setup Details
LNS Configuration Prerequisites
Configuring an LNS
Creating an L2TP Destination Profile
Creating an L2TP Host Profile
Configuring the Maximum Number of LNS Sessions
Configuring Groups for LNS Sessions
Configuring the RADIUS Connect-Info Attribute on the LNS
Configuring the Receive Window Size
Selecting Service Modules for LNS Sessions Using MLPPP
Enabling Tunnel Switching
Creating Persistent Tunnels
Testing Tunnel Configuration
Configuring L2TP Tunnel Switch Profiles
Configuring Disconnect Cause Information
Configuring Peer Resynchronization
Configuring the Transmit Connect Speed Calculation Method
aaa tunnel switch-profile
aaa tunnel tx-connect-speed-method
avp
bundled-group-id
bundled-group-id-overrides-mlppp-ed
default-upper-type mlppp
disable proxy lcp
disconnect-cause
enable proxy authenticate
failover-resync
ip router-id
l2tp destination profile
l2tp disconnect-cause
l2tp failover-resync
l2tp switch-profile
l2tp tunnel-switching
l2tp tunnel default-receive-window
l2tp tunnel idle-timeout
l2tp tunnel test
local host
local ip address
max-sessions
radius connect-info-format
radius include l2tp-ppp-disconnect-cause acct-stop enable
receive-window
remote host
sessions-limit-group
session-out-of-resource-result-code-override
tunnel password
tx-connect-speed-method
virtual-router
Monitoring the Mapping for User Domains and Virtual Routers with AAA
Monitoring Configuration of Tunnel Parameters with AAA
Monitoring Configured Tunnel Groups with AAA
Monitoring Global Configuration Status on E Series Routers
Monitoring Detailed Configuration Information for Specified Destinations
Monitoring Configured and Operational Status of all Destinations
Monitoring Locked Out Destinations
Monitoring Configured Destination Profiles or Host Profiles
Monitoring Statistics on the Cause of a Session Disconnection
Monitoring Detailed Configuration Information about Specified Sessions
Monitoring Configured and Operational Summary Status
Monitoring Configured Switch Profiles on Router
Monitoring Detailed Configuration Information about Specified Tunnels
Monitoring Configured and Operational Status of All Tunnels
Monitoring Chassis-wide Configuration for L2TP Dial-out
Monitoring Dial-out Targets within the Current VR Context
Monitoring Operational Status within the Current VR Context
Monitoring Status of Dial-out Sessions
show aaa domain-map
show aaa tunnel-group
show aaa tunnel-parameters
show l2tp
show l2tp destination
show l2tp destination lockout
show l2tp destination profile
show l2tp received-disconnect-cause-summary
show l2tp dial-out
show l2tp dial-out session
show l2tp dial-out target
show l2tp dial-out virtual-router
show l2tp session
show l2tp switch-profile
show l2tp tunnel
ERX operating as an L2TP LNS will not negotiate multilink PPP with tunneled clients unless the LAC supplies proxy LCP information when establishing the tunnel.
Stray policies on L2TP LNS after shut/no shut of L2TP and bouncing subscribers
Windows clients are unable to establish MLPPP sessions with the ERX acting as an L2TP LNS
conf f filename.scr complains about L2TP LNS config
NAS-Port and NAS-Port-Type missing in L2TP LNS side of RADIUS access-request, acct-request and acct-stop messages
SM Line Card Reset FC recovery, reset type: panic task: Ingress FC[1] file: ngress/ifaNat.cc line: 215 after enabling ip port mirroring on an L2TP LNS.
Configuring ERX and Windows XP for L2TP over IPSec
Sample configuration for L2TP tunnel switching
Interoperability problems relating to LCP negotiation of MRU
PPP compression support on E-series routers
LNS l2tp interface doesn't show queue of qos-profile attached by SDX
L2TP LAC. Sessions/tunnels to an LNS drop, when bouncing sessions tunneled to a second LNS
ERX LAC sends L2TP ICCN packet that is rejected by LNS
L2TP ICRQs rejected by LNS because "system too busy".
L2TP flow control issues between a ERX LNS and a Cisco LAC.
Sample L2TP Configuration with a Cisco LAC and an ERX LNS
How does an L2TP LAC report the ATM subinterface speed to an LNS?
ERX (LNS) may incorrectly attempt to re-establish an L2TP tunnel
System result code behavior when the maximum number of L2TP sessions is reached on an LNS
How to apply l2tp rate-limit-profile on LNS
LNS fails to reassemble L2TP Tunnel packets.
Reassembly failures on TSM in L2TP configuration with ERX as LNS.
If the L2TP tunnel is originated from LAC inside VPN VRF to the LNS inside VRF on a remote PE, PPP frames will be dropped on access line card after L2TP session have been estabilshed.
ERX LNS sends an incorrect MRU value after receiving an LCP config NAK for MLPPP clients over L2TP
Line Card Reset - Ping Failure Threshold Exceeded reset of the TSM line card after bring up a few hundred L2TP sessions
PPP magic number improperly handled for Proxy LCP at the LNS.
Cannot establish L2TP tunnel during 31-second "dead time"
L2TP tunnel switch fragmentation corrupting egress packets
L2TP sessions are dropped after SRP switch with HA active and the L2TP peer resynchronization method configured for silent-failover
Receiving a retrograde Nr from peer may cause a "stuck" L2TP tunnel
New
