LM-10 ADV Line Module

Module label ES2 10G ADV LM
Number of ports
Not applicable
Software release
First supported: 10.1.0
Description
190 W maximum
Acts as frame forwarding engines for the physical interfaces
Processes up to 10 Gb of data traffic
Pairs with ES2–S2 10GE PR IOA, ES2-S1 REDUND IOA, ES2–S3 GE-20 IOA, ES2–S1 GE-8 IOA, and ES2-S1 Service IOA
In an SRP-120 and SRP-320 configuration, it can be installed in any slot
Type
TFA ASIC
Capability
Supports a line rate of 128–byte frames on IOAs
The 120–Gbps and 320–Gbps switch fabrics allocate 10 Gbps of overall bandwidth to each line module slot.
See JunosE System Basics Configuration Guide, Chapter 6, Managing Modules for more information.
Software features
Not applicable
Line module compatibility
Not applicable
SRP module compatibility
SRP-120
SRP-320
Line module redundancy compatibility
Yes (Redundancy IOA must be installed in either slot 0 or slot 11)
Can back up another ES2 10G ADV LM or ES2 10G LM
Shared tunnel server on the ES2 10G ADV LM supports line module redundancy.
Port redundancy support
Not applicable
Cables and connectors
Not applicable
LEDs When lit, LED indicates:
OK (green)—Self-test passed
FAIL (red)—Failure detected
ONLINE (green)—Online with no alarms or errors
REDUN (green)—Redundant card available
Alarms, errors, and events
See Monitoring Modules in JunosE System Basics Configuration Guide, Chapter 6, Managing Modules.

Module label	ES2 10G ADV LM
Number of ports	Not applicable
Software release	First supported: 10.1.0
Description	190 W maximum Acts as frame forwarding engines for the physical interfaces Processes up to 10 Gb of data traffic Pairs with ES2–S2 10GE PR IOA, ES2-S1 REDUND IOA, ES2–S3 GE-20 IOA, ES2–S1 GE-8 IOA, and ES2-S1 Service IOA In an SRP-120 and SRP-320 configuration, it can be installed in any slot
Type	TFA ASIC
Capability	Supports a line rate of 128–byte frames on IOAs The 120–Gbps and 320–Gbps switch fabrics allocate 10 Gbps of overall bandwidth to each line module slot. See JunosE System Basics Configuration Guide, Chapter 6, Managing Modules for more information.
Software features	Not applicable
Line module compatibility	Not applicable
SRP module compatibility	SRP-120 SRP-320
Line module redundancy compatibility	Yes (Redundancy IOA must be installed in either slot 0 or slot 11) Can back up another ES2 10G ADV LM or ES2 10G LM Shared tunnel server on the ES2 10G ADV LM supports line module redundancy.
Port redundancy support	Not applicable
Cables and connectors	Not applicable
LEDs	When lit, LED indicates: OK (green)—Self-test passed FAIL (red)—Failure detected ONLINE (green)—Online with no alarms or errors REDUN (green)—Redundant card available
Alarms, errors, and events	See Monitoring Modules in JunosE System Basics Configuration Guide, Chapter 6, Managing Modules.