Technical Documentation
Related Documentation
- Propagation of LAG Subscriber Information to AAA and RADIUS
- RADIUS IETF Attributes Supported for Subscriber AAA Access Messages
- RADIUS IETF Attributes Supported for Subscriber AAA Accounting Messages
- RADIUS IETF Attributes Supported for AAA Tunnel Accounting Messages
- RADIUS IETF Attributes
- aaa intf-desc-format include
- radius acct-session-id-format
- radius calling-station-delimiter
- radius calling-station-format
- radius connect-info-format
- radius dsl-port-type
- radius ethernet-port-type
- radius ignore
- radius include
- radius nas-identifier
- radius nas-port-format
- radius nas-port-format extended
- radius override calling-station-id remote-circuit-id
- radius override nas-info
- radius override nas-ip-addr tunnel-client-endpoint
- radius override nas-port-id remote-circuit-id
- radius pppoe nas-port-format unique
- radius remote-circuit-id-delimiter
- radius remote-circuit-id-format
- radius vlan nas-port-format stacked
CLI Commands Used to Configure RADIUS IETF Attributes
Table 1 lists the RADIUS IETF attributes and the corresponding CLI commands used to configure them. The attributes are listed numerically—each attribute is followed by a list of the commands that you can use to manage the attribute.
Table 1: CLI Commands Used to Configure RADIUS IETF Attributes
Attribute Number | Attribute Name | CLI Command |
|---|---|---|
[4] | NAS-IP-Address | |
[5] | NAS-Port | |
[8] | Framed-IP-Address |
|
[9] | Framed-Ip-Netmask |
|
[13] | Framed-Compression |
|
[22] | Framed-Route |
|
[25] | Class |
|
[30] | Called-Station-Id |
|
[31] | Calling-Station-Id | |
[32] | NAS-Identifier | |
[41] | Acct-Delay-Time |
|
[44] | Acct-Session-Id |
|
[45] | Acct-Authentic |
|
[49] | Acct-Terminate-Cause |
|
[50] | Acct-Multi-Session-Id |
|
[51] | Acct-Link-Count |
|
[52] | Acct-Input-Gigawords |
|
[53] | Output-Gigawords |
|
[55] | Event-Timestamp |
|
[61] | NAS-Port-Type | |
[64] | Tunnel-Type |
|
[65] | Tunnel-Medium-Type |
|
[66] | Tunnel-Client-Endpoint |
|
[67] | Tunnel-Server-Endpoint |
|
[68] | Acct-Tunnel-Connection |
|
[77] | Connect-Info |
|
[82] | Tunnel-Assignment-Id |
|
[83] | Tunnel-Preference |
|
[87] | NAS-Port-Id | |
[90] | Tunnel-Client-Auth-Id |
|
[91] | Tunnel-Server-Auth-Id |
|
[96] | Framed-Interface-Id |
|
[97] | Framed-Ipv6-Prefix |
|
[99] | Framed-Ipv6-Route |
|
[100] | Framed-Ipv6-Pool |
|
[123] | Delegated-Ipv6-Prefix |
|
[188] | Ascend-Num-In-Multilink |
|
All Tunnel Server Attributes |
|
Related Documentation
- Propagation of LAG Subscriber Information to AAA and RADIUS
- RADIUS IETF Attributes Supported for Subscriber AAA Access Messages
- RADIUS IETF Attributes Supported for Subscriber AAA Accounting Messages
- RADIUS IETF Attributes Supported for AAA Tunnel Accounting Messages
- RADIUS IETF Attributes
- aaa intf-desc-format include
- radius acct-session-id-format
- radius calling-station-delimiter
- radius calling-station-format
- radius connect-info-format
- radius dsl-port-type
- radius ethernet-port-type
- radius ignore
- radius include
- radius nas-identifier
- radius nas-port-format
- radius nas-port-format extended
- radius override calling-station-id remote-circuit-id
- radius override nas-info
- radius override nas-ip-addr tunnel-client-endpoint
- radius override nas-port-id remote-circuit-id
- radius pppoe nas-port-format unique
- radius remote-circuit-id-delimiter
- radius remote-circuit-id-format
- radius vlan nas-port-format stacked
