Technical Documentation

Download Software

Research a Problem

Case Management

Contract & Product Management

Documentation Archive

Guidelines and Policies

Security Resources

CLI Commands Used to Configure Juniper Networks VSAs

Table 1 lists the Juniper Networks VSAs and the corresponding CLI commands used to modify them. The attributes are listed numerically.

Table 1: CLI Commands Used to Configure Juniper Networks VSAs

Attribute Number	Attribute Name	CLI Command
[26-1]	Virtual-Router	radius ignore virtual-router
[26-10]	Ingress-Policy-Name	radius include ingress-policy-name radius ignore ingress-policy-name
[26-11]	Egress-Policy-Name	radius include egress-policy-name radius ignore egress-policy-name
[26-14]	Service-Category	radius ignore atm-service-category
[26-15]	PCR	radius ignore atm-pcr
[26-16]	SCR	radius ignore atm-scr
[26-17]	MBS	radius ignore atm-mbs
[26-24]	Pppoe-Description	radius include pppoe-description
[26-35]	Acct-Input-Gigapackets	radius include input-gigapkts
[26-36]	Acct-Output-Gigapackets	radius include output-gigapkts
[26-44]	Tunnel-Interface-Id	radius include tunnel-interface-id
[26-45]	Ipv6-Virtual-Router	radius include ipv6-virtual-router
[26-46]	Ipv6-Local-Interface	radius include ipv6-local-interface
[26-47]	Ipv6-Primary-DNS	radius include ipv6-primary-dns
[26-48]	Ipv6-Secondary-DNS	radius include ipv6-secondary-dns
[26-51]	Disconnect-Cause	radius include l2tp-ppp-disconnect-cause
[26-53]	Service-Description	radius include profile-service-description
[26-55]	DHCP-Options	radius include dhcp-options
[26-56]	DHCP-MAC-Address	radius include dhcp-mac-address
[26-57]	DHCP-GI-Address	radius include dhcp-gi-address
[26-62]	MLPPP-Bundle-Name	radius include mlppp-bundle-name
[26-63]	Interface-Desc	radius include interface-description
[26-81]	L2C-Information	radius include access-loop-parameters
[26-92]	L2C-Up-Stream-Data	radius include l2c-upstream-data
[26-93]	L2C-Down-Stream-Data	radius include l2c-downstream-data
[26-106]	Ipv6-Ingress-Policy-Name	radius include ipv6-ingress-policy-name radius ignore ipv6-ingress-policy-name
[26-107]	Ipv6-Egress-Policy-Name	radius include ipv6-egress-policy-name radius ignore ipv6-egress-policy-name
[26-129]	Ipv6-NdRa-Prefix	radius include ipv6-nd-ra-prefix
[26-141]	Downstream-Calculated-Qos-Rate	radius include downstream-calculated-qos-rate access-request radius include downstream calculated-qos-rate acct-start radius include downstream-calculated-qos-rate acct-stop
[26-142]	Upstream-Calculated-Qos-Rate	radius include upstream-calculated-qos-rate access-request radius include upstream calculated-qos-rate acct-start radius include upstream-calculated-qos-rate acct-stop
[26-143]	Max-Clients-Per-Interface	radius ignore pppoe-max-session
[26-150]	ICR-Partition-Id	radius include icr-partition-id radius icr-partition-accounting
[26-151]	IPv6-Acct-Input-Octets	radius include ipv6-accounting
[26-152]	IPv6-Acct-Output-Octets	radius include ipv6-accounting
[26-153]	IPv6-Acct-Input-Packets	radius include ipv6-accounting
[26-154]	IPv6-Acct-Output-Packets	radius include ipv6-accounting
[26-155]	IPv6-Acct-Input-Gigawords	radius include ipv6-accounting
[26-156]	IPv6-Acct-Output-Gigawords	radius include ipv6-accounting
[26-159]	DHCP-Option 82	radius include dhcp-option-82

Choose Country

North America

Europe

Asia Pacific

Technical Documentation

Related Documentation

CLI Commands Used to Configure Juniper Networks VSAs

Related Documentation

Published: 2012-01-12