ip rpf-route

Syntax

ip rpf-route ipAddress addressMask
{ nextHopIpAddress | nextHopInterfaceType nextHopInterfaceSpecifier }
[ distanceValue ] [ tag tagValue ]

[ no ] ip rpf-route ipAddress addressMask

Release Information

Command introduced before JunosE Release 7.1.0.

Description

Customizes static routes that the router can use to verify source addresses in multicast packets. The no version removes the static route.

Options

• ipAddress—IP address of the destination network
• addressMask—Subnet mask for the destination network
• nextHopIpAddress—IP address of the next hop
• nextHopInterfaceType—Interface type; see Interface Types and Specifiers
• nextHopInterfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers
• distanceValue—Number in the range 0–255 that indicates the preference for this route
• tagValue—Number in the range 0–4294967295 that identifies the route in the routing table

Mode

Global Configuration