t1 timeslots

Syntax

t1 channel/subchannel timeslots range [ speed { 56 | 64 } ]

no t1 subchannel

Release Information

Command introduced before JunosE Release 7.1.0.

Description

Configures the timeslots and data rate used on each T1 channel on the CT3 interface. The no version deletes the fractional T1 circuit.

Options

• channel—T1 channel number in the range 1–28
• subchannel—Subchannel specifies the logical subchannel on a T1 in the range 1–24
• range—Specifies the timeslot assigned to the T1 channel, in the range 1–24. A dash represents a range of timeslots, and a comma separates timeslots. For example, 1-10, 15-18 assigns timeslots 1 through 10 and 15 through 18.
• speed—Specifies the data rate for the T1 channel, either 56 Kbps or 64 Kbps; default value is 64 Kbps

Mode

Controller Configuration