show bgp ipv6 inconsistent-as

Syntax

show bgp ipv6
[ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName | route-target signaling ] inconsistent-as [ fields { fieldOptions } ] [ filter ]

Release Information

Command introduced before JunosE Release 7.1.0.
route-target signaling keywords added in JunosE Release 8.2.0.

Description

Displays information only about routes with inconsistent AS paths.

Options

• unicast—Specifies the IPv6 unicast address family and routing table; the default option
• multicast—Specifies the IPv6 multicast address family and routing table
• vpnv6 all—Specifies the VPN-IPv6 address family and all IPv6 VPN routing and forwarding instances
• vpn6 vrf vrfName—Specifies the VPN-IPv6 address family and only the IPv6 VPN routing and forwarding instance with the name vrfName
• route-target signaling—Specifies the route-target address family
• fields—Displays only the specified fields; the display order of the fields is hard-coded and not affected by the order in which you enter them
• fieldOptions—Fields to be displayed, in the format
  all | [ afi | aggregator | as-path | atomic-aggregate | best | clusters | communities | extended-communities | imported | intro | in-label | loc-pref | med | next-hop | next-hop-cost | origin | originator-id | out-label | peer | peer-type | rd | safi | stale | unknown-types | weight ]*
  • all—All available information; not recommended, because this information for each network does not fit on a single line and is difficult to read
  • afi—Address family identifier
  • aggregator—AS number and IP address of aggregator
  • as-path—AS path through which this route bas been advertised
  • atomic-aggregate—Whether the atomic aggregate attribute is present
  • best—Whether this is the best route for the prefix
  • clusters—List of cluster IDs through which the route has been advertised
  • communities—Community number associated with the route
  • extended-communities—Extended community
  • imported—Whether the route was imported
  • intro—Introductory information about the state of various BGP attributes; this information is displayed only if you specify this keyword
  • in-label—MPLS label for the route; the label received with incoming MPLS frames; typically, but not always, this is the label advertised to MP-BGP peers
  • loc-pref—Local preference for the route
  • med—Multiexit discriminator for the route
  • next-hop—IP address of the next router that is used when forwarding a packet to the destination network
  • next-hop-cost—Whether the indirect next hop of the route is unreachable, if not, displays IGP cost to the indirect next hop
  • origin—Origin of the route
  • originator-id—Router ID of the router in the local AS that originated the route
  • out-label—MPLS label for the route; the label sent with outgoing MPLS frames; also the label received from MP-BGP peer; typically, but not always, this is the label received from MP-BGP peers
  • peer—IP address of BGP peer from which route was learned
  • peer-type—Type of BGP peer: internal, external, or confederation
  • rd—Route distinguisher
  • safi—Subsequent address family identifier
  • stale—Route that has gone stale due to peer restart
  • unknown-types—Attribute codes for unknown path attributes
  • weight—Weight of the route
  • *—Indicates that one or more parameters can be repeated multiple times in a list in the command line
• filter—See Filtering show Commands

Mode

Privileged Exec, User Exec