Table of Contents
- About the Documentation
- E Series and JunosE Documentation and Release Notes
- Audience
- E Series and JunosE Text and Syntax Conventions
- Obtaining Documentation
- Documentation Feedback
- Requesting Technical Support
- Chapters
- Configuring Channelized T3 Interfaces
- Overview
- MDL/FDL Support
- MDL Standards
- FDL Standards
- Timeout of Received
MDL and FDL Messages
- Frequency of FDL Path Messages
- Higher-Level Protocols
- Platform Considerations
- CT3/T3-F0 Line Modules and CT3/T3 12 I/O Modules
- Exchanging Modules
- Interface Stack
- Numbering Scheme
- T3 Controllers
- T1 Channels
- Fractional T1
- HDLC Channels
- References
- Before You Configure an Interface
- Configuration Tasks
- Configuring a T3 Controller
- Configuring MDL
Messages
- Other
Optional Tasks
- Configuring T1 Channels
- Optional Tasks
- Configuring
FDL Messages
- Configuring an HDLC Channel
- Optional Tasks
- Configuration Example
- Testing Interfaces
- Testing at the T3 Layer
- Testing at the T1 Layer
- Monitoring Interfaces
- Setting a Baseline
- Displaying Counters and Time Intervals
- Output Filtering
- Configuring T3 and E3 Interfaces
- Overview
- MDL Support
- MDL Standards
- Timeout of Received MDL
Messages
- Higher-Level Protocols
- Platform Considerations
- COCX-F3 Line Modules and Associated I/O Modules
- OCx/STMx/DS3-ATM Line Modules and 4xDs3 ATM I/O Modules
- CT3/T3-F0 Line Modules and CT3/T3 12 I/O Modules
- Interface Stack
- Numbering Scheme
- References
- Before You Configure an Interface
- Configuration Tasks
- Configuring a T3 or an E3 Controller
- Configuring MDL
Messages
- Optional
Tasks
- Configuring Fractional T3
- Configuring an HDLC Channel
- Optional Tasks
- Configuration Examples
- Testing Interfaces
- Sending BERT Patterns
- Enabling Local, Network, and Payload Loopback
- Enabling Remote Loopback
- Monitoring Interfaces
- Setting a Baseline
- Displaying Counters and Time Intervals
- Output Filtering
- Configuring Unchannelized OCx/STMx Interfaces
- Overview
- APS and MSP
- Automatic Switchover
- Manual Switchover
- Switching Mechanisms
- Bidirectional Switching
Mode
- Unidirectional Switching
Mode
- Reversion After
Switchover
- Communication
Methods
- Higher-Level Protocols
- Platform Considerations
- OCx/STMx/DS3-ATM Line Modules
- OCx/STMx POS Line Modules
- OC48 Line Modules
- OC3/STM1 GE/FE Line Module
- ES2 4G Line Module
- E120 Router Configuration
- E320 Router Configuration
- OCx/STMx ATM IOAs
- OCx/STMx POS IOAs
- Numbering Scheme
- ERX7xx Models, ERX14xx Models, and
the ERX310 Router
- E120 and E320 Routers
- Interface Specifier
- Exchanging Modules
- References
- Configuration Tasks
- Configuring the SONET/SDH Layers
- Configuring APS/MSP
- Configuring the Working Interface
- Configuring
the Protect Interface
- Configuring
SONET/SDH Alarms
- Configuration
Example
- Configuring APS
Event Collection
- Manual Switching to a Redundant Port
- Testing Interfaces
- Loopback Testing
- Testing Connectivity
- Monitoring SONET/SDH Interfaces
- Monitoring Interface Statistics
- Monitoring APS/MSP
- Configuring Channelized OCx/STMx Interfaces
- Overview
- SONET APS and SDH MSP
- MDL/FDL Support
- MDL Standards
- FDL Standards
- Timeout of Received
MDL and FDL Messages
- Frequency of FDL Path Messages
- Higher-Level Protocols
- Platform Considerations
- cOCx/STMx FO Line Module
- Interface Stack
- SONET/SDH VT Controllers
- T3 Controllers
- HDLC
- Numbering Scheme
- References
- Before You Configure an Interface
- Configuration Tasks
- SONET/SDH Configuration Tasks
- Configuring Higher
Layers
- T1/E1 Configuration Tasks
- Configuring an
Unframed E1 Line
- Configuring T1 and E1 Lines
- Configuring
T1 Interfaces to Send FDL Messages
- Disabling
Interfaces and Channel Groups
- Configuring
Higher Layers
- T3 Configuration Tasks
- Configuring T3
Line Parameters
- Configuring
T3 Interfaces to Send MDL Messages
- Configuring
T1 Channels on T3 Interfaces
- Configuring
T1 Channels to Send FDL Messages
- Configuring
Higher Layers
- HDLC Channel Configuration Tasks
- Optional Tasks
- Configuration Examples
- Example 1: Configuring Interfaces in SONET Mode
- Example 2: Configuring Interfaces in SDH Mode
- Example 3: Configuring Frame Relay
- Example 4: Configuring PPP
- Testing Interfaces
- Sending BERT Patterns
- Receiving BERT Patterns
- Enabling Local or Network Loopback
- Enabling Remote Loopback Testing
- Testing Connectivity
- Monitoring Interfaces
- Setting a Baseline
- Output Filtering
- Monitoring APS/MSP
- Configuring Ethernet Interfaces
- Ethernet Overview
- Features
- Ethernet Interface Platform Considerations
- Numbering Scheme
- ERX7xx Models, ERX14xx Models, and
the ERX310 Router
- E120 and E320 Routers
- Interface Specifier
- Fast Ethernet I/O Modules
- FE-8 I/O Module
- FE-8 SFP I/O Module
- Gigabit Ethernet I/O Modules and IOAs
- GE I/O Module
- GE-2 SFP I/O Module
- Ports on GE-2 SFP I/O Module
- Bandwidth
and Line Rate Considerations
- GE-8 I/O Module
- Bandwidth and Line Rate Considerations
- Managing High-Density Ethernet
- OC3-2 GE APS I/O Module
- ES2-S1 GE-4 IOA
- ES2-S1 GE-8 IOA
- ES2 4G LM Combination
- Bandwidth and Line Rate Considerations
- Managing High-Density Ethernet
- ES2 10G LM Combination
- Bandwidth and Line Rate Considerations
- Managing High-Density Ethernet
- ES2 10G ADV LM
Combination
- Bandwidth and Line Rate Considerations
- Managing High-Density Ethernet
- ES2-S3 GE-20 IOA
- ES2 10G LM Combination
- Bandwidth and Line Rate
Considerations
- Managing High-Density Ethernet
- ES2 10G ADV LM Combination
- Bandwidth and Line Rate
Considerations
- Managing High-Density Ethernet
- 10-Gigabit Ethernet IOAs
- ES2-S1 10GE IOA
- Managing High-Density Ethernet
- ES2-S2 10GE PR IOA
- ES2 10G Uplink LM Combination
- Uplink Operation
- Multicast
- L2TP
- Flow Control and Policy
- ES2 10G LM Combination
- Access Operation
- Multicast
- Flow Control and Policy
- ES2 10G ADV LM
Combination
- Access Operation
- Multicast
- Flow Control and Policy
- Ethernet References
- High-Density Ethernet
- Managing Port Redundancy on Gigabit Ethernet I/O Modules
- Configuration Tasks for Ethernet
- Configuring the Physical Interface
- Disabling Ethernet Interfaces
- Monitoring Ethernet Interfaces
- Setting Statistics Baselines
- Using Ethernet show Commands
- Managing Tunnel-Service and IPSec-Service Interfaces
- Tunnel-Service and IPSec-Service Overview
- Types of Tunnel-Server Ports
- Dedicated Tunnel-Server Ports
- Shared Tunnel-Server
Ports
- Types of Tunnel-Service Interfaces
- Tunnel-Service Interface Platform Considerations
- Supported Modules for Dedicated Tunnel-Server Ports
- ERX7xx Models, ERX14xx Models, and
the ERX310 Router
- E120 and E320 Routers
- Supported Modules for Shared Tunnel-Server Ports
- ERX14xx Models and the ERX310 Broadband
Services Router
- E120 and E320 Routers
- Numbering Scheme
- ERX7xx Models, ERX14xx Models, and
the ERX310 Router
- E120 and E320 Routers
- Interface Specifier
- Supported Applications for Dedicated and Shared Tunnel-Server
Ports
- Redundancy and Interface Distribution of Tunnel-Service Interfaces
- SMs, ES2-S1 Service IOA, and Shared Tunnel-Server Modules
- Static IP Tunnel-Service Interfaces
- Dynamic Tunnel-Service
Interfaces
- Interface Allocation for
Shared Tunnel-Server Modules
- ISMs
- Tunnel-Service Interface Considerations
- Provisioning Tunnel-Service Interfaces
- Bandwidth Limitations of Shared Tunnel-Server
Ports
- Exchanging Tunnel-Server Modules
- Unprovisioned Tunnel-Service Interfaces
- Configuring Tunnel-Server Ports and Tunnel-Service Interfaces
- Identifying the Physical Location of the Tunnel-Server Port
- Provisioning the Maximum Number of Interfaces on a Tunnel-Server
Port
- Reserving Bandwidth on Shared Tunnel-Server Ports
- Verifying the Tunnel-Server Interface Configuration
- Unprovisioning Tunnel-Service Interfaces
- Monitoring Tunnel-Service Interfaces
- Index
- Index
Hide Navigation Pane
Show Navigation Pane
Feedback
Download
SHA1
