Hide Navigation Pane
Show Navigation Pane
Feedback
Download
SHA1
Index
A
- access lists, IP
- access lists, IPv6
- advertising DVMRP routes 1, 2
- assert messages
- assigning multicast groups 1, 2
- auto-RP router
B
C
- Class D IPv4 addresses
- clear ip commands
- clear ip dvmrp route
- clear ip mroute 1, 2
- clear ip pim auto-rp
- clear ip pim interface count 1, 2
- clear ip pim remote-neighbor count
- clear ipv6 commands
- conventions
- customer support
D
- data MDT, creating
- data path failure
- debug commands
- default MDT, creating
- detecting RIP data path failure 1, 2
- disable command
- disable-dynamic-redistribute command
- disabling dynamic route redistribution
- Distance Vector Multicast Routing Protocol. See DVMRP
- documentation set
- downstream interface 1, 2
- DRs (designated routers)
- DVMRP (Distance Vector Multicast Routing Protocol)
- advertising routes 1, 2
- configuring
- default router, configuring
- deleting routes
- enabling
- exchanging unicast routes
- filtering reports
- metric
- monitoring
- neighbors
- overview
- pruning
- summary addresses
- tunnels
- using with IGMP
- using with PIM 1, 2
- dynamic route redistribution, disabling
E
- encapsulation commands
- exchanging DVMRP unicast routes
F
- filtering
G
H
I
- IGMP (Internet Group Management Protocol)
- configuring
- disabling 1, 2
- enabling 1, 2
- limiting groups on interfaces
- monitoring 1, 2
- performing host functions
- querier
- removing
- specifying version 1, 2, 3
- igmp commands
- IGMP proxy
- IGMP reports, accepting
- IGP (interior gateway protocol)
- importing routes. See redistributing routes
- Internet Group Management Protocol. See IGMP
- investigating IP multicast routes
- IP addresses
- ip commands
- ip block-multicast-sources
- ip multicast-routing 1, 2, 3
- ip multicast-routing disable-rpf-check 1, 2
- ip multicast-routing permanent-mroute
- ip route-type
- ip rpf-route
- ip unnumbered 1, 2
- mroute port limit 1, 2, 3, 4
- ip dvmrp commands See also show ip dvmrp commands
- ip igmp commands See also show ip igmp commands
- ip igmp
- ip igmp access-group
- ip igmp access-source-group 1, 2, 3
- ip igmp group limit
- ip igmp immediate-leave
- ip igmp last-member query-interval
- ip igmp promiscuous
- ip igmp querier
- ip igmp querier-timeout
- ip igmp query-interval
- ip igmp query-max-response-time
- ip igmp robustness
- ip igmp ssm-map enable
- ip igmp ssm-map static
- ip igmp static-exclude
- ip igmp static-group
- ip igmp static-include
- ip igmp version 1, 2, 3
- ip igmp-proxy
- ip igmp-proxy unsolicited-report-interval
- ip igmp-proxy V1-router-present-time
- ip multicast commands
- IP multicast groups
- IP multicast interfaces, monitoring
- IP multicast routes
- IP multicasting
- ip pim commands See also show ip pim commands
- ip rip commands
- IP tunnels
- ipv6 commands See also show ipv6 commands
- ipv6 mld commands See also show ipv6 mld commands
- ipv6 mld
- ipv6 mld access-group
- ipv6 mld access-source-group
- ipv6 mld apply-oif-map
- ipv6 mld explicit-tracking
- ipv6 mld group limit
- ipv6 mld immediate-leave
- ipv6 mld last-member query-interval
- ipv6 mld oif-map
- ipv6 mld querier-timeout
- ipv6 mld query-interval
- ipv6 mld query-max-response-time
- ipv6 mld ssm-map enable
- ipv6 mld ssm-map static
- ipv6 mld static-exclude
- ipv6 mld static-group
- ipv6 mld static-include
- ipv6 mld version 1, 2, 3
- ipv6 mld-proxy
- ipv6 mld-proxy unsolicited-report-interval
- ipv6 mld-proxy version
- IPv6 multicast
- ipv6 multicast commands
- IPv6 multicast groups
- ipv6 pim commands See also show ipv6 pim commands
J
L
- leave group membership messages 1, 2
- leaving an IP multicast group
- leaving an IPv6 multicast group
- limiting IGMP groups on interfaces
- limiting MLD groups on interfaces
- liveness detection
M
- M-BONE (multicast backbone of the Internet)
- manuals
- MDT (Multicast Distribution Tree)
- mdt commands
- metric
- MLD (Multicast Listener Discovery)
- configuring
- disabling 1, 2
- enabling 1, 2
- limiting groups on interfaces
- monitoring
- performing host functions
- removing
- specifying version 1, 2
- mld disable command
- MLD proxy
- mrinfo requests, support for
- mtrace command
- multicast
- IP. See IP multicasting
- IPv6. See IPv6 multicast
- Multicast Distribution Tree. See MDT
- multicast group port limit command 1, 2
- Multicast Listener Discovery. See MLD
- multicast VPNs
N
P
- PIM (Protocol Independent Multicast) See also PIM dense mode, PIM sparse mode, PIM sparse-dense mode
- PIM dense mode 1, 2, See also PIM
- pim disable command 1, 2
- PIM SM. See PIM sparse mode
- PIM sparse mode
- PIM sparse-dense mode
- PIM SSM (PIM source-specific multicast)
- Protocol Independent Multicast. See PIM
- prune messages 1, 2
Q
R
- reachability commands
- redistribute command
- redistributing routes, DVMRP
- redistribution routes
- remote neighbors
- remote-neighbor command
- removing PIM 1, 2
- rendezvous point router. See RP routers
- reporting IP multicast groups
- reporting IPv6 multicast groups
- resetting PIM counters and mappings 1, 2
- reverse-path forwarding. See RPF
- RIP (Routing Information Protocol)
- route-map command
- router commands
- router dvmrp 1, 2
- router igmp
- router mld
- router pim 1, 2, 3, 4
- routes
- routing policy commands
- RP (rendezvous point) routers
- assigning automatically
- configuring
- RPF (reverse-path forwarding) 1, 2, 3
- RPF routes, monitoring 1, 2
S
- set threshold command
- setting
- baseline
- DVMRP hop-count
- PIM SPT threshold
- shared trees 1, 2, 3, 4
- shortest path trees. See SRTs
- show ip commands
- show ip mroute
- show ip mroute count 1, 2, 3, 4
- show ip mroute oif-detail
- show ip mroute summary
- show ip rpf-route
- show ip dvmrp commands
- show ip igmp commands
- show ip multicast commands
- show ip pim commands
- show ipv6 commands
- show ipv6 mroute
- show ipv6 mroute count 1, 2
- show ipv6 mroute oif-detail
- show ipv6 mroute summary
- show ipv6 rpf-route
- show ipv6 mld commands
- show ipv6 mld ssm-mapping command
- show ipv6 multicast commands
- show ipv6 pim commands
- show multicast group limit command 1, 2
- source-rooted trees. See SRTs
- Source-Specific Multicast for IP—draft-ietf-ssm-arch-06.txt (March 2005 expiration)
- specifying IP multicast groups
- specifying IPv6 multicast groups
- SPTs (shortest path trees). See SRTs
- SRTs (source-rooted trees) 1, 2, 3, 4, 5
- static routes
- summary addresses
- support, technical See technical support
T
- technical support
- text and syntax conventions
- timers
- trace packets
- tunnel group-address-pool command
- tunnel mdt command 1, 2
U
- undebug commands
- unicast routes, DVMRP
- update-source command
- upstream interface 1, 2
V
