Hide Navigation Pane
Show Navigation Pane
Feedback
Download
SHA1
Index
Symbols
A
- access lists, BGP
- access-list command 1, 2
- address families
- address-family command
- administrative distance
- admission control, MPLS
- advertise-map keyword (aggregate-address)
- aggregate-address command
- aggregation, LDP FEC
- aggregator, BGP
- append-after command
- APS/MSP (Automatic Protect Switching/Multiplex Section Protection)
- areas, OSPF
- AS (autonomous system)
- AS path filtering
- AS-path, BGP
- as-set keyword (aggregate-address)
- ATM (Asynchronous Transfer Mode)
- AAL0 encapsulation
- AAL5 encapsulation
- Martini encapsulation
- over MPLS
- passthrough for ATM over MPLS 1, 2
- VCC cell relay encapsulation
- ATM cells
- concatenation of multiple
- transported over a single pseudowire, subset of
- atm commands
- atm cell-packing
- atm mcpt-timers
- atm pvc 1, 2
- ATM line modules
- and transport of a subset of ATM VCs
- hardware limitations
- ATM Martini cell packing timer
- expired time interval
- for concatenation of multiple cells
- ATM n-to-one VCC cell transport (0x0009) pseudowire (PW) type
- ATM ports
- changed to LOS state
- configuring cell concatenation parameters
- connectivity between two of them
- not changed to LOS state
- ATM virtual circuits
- adding MPLS Martini circuit configuration
- and emulation of connectivity
- based on RFC 4816
- concatenation of multiple cells
- configuring a subset of
- configuring VPI/VCI ranges
- hardware limitations of ATM LMs
- in Martini topologies
- received on an ATM port
- transmission of a subset of ATM cells over a pseudowire
- transmission of multiple cells over a pseudowire
- transmission of multiple VCs over a single pseudowire
- transport of multiple cells over a pseudowire
- transportation of cells from multiple circuits
- transportation of multiple ATM cells
- atomic-aggregate, BGP
- attribute-map keyword (aggregate-address)
- authentication
- auto-summary command
- autoconfiguration, LDP
- autonomous system. See AS
B
- backdoor route, BGP
- backup tunnels, MPLS RSVP-TE
- bandwidth command
- baseline commands
- baseline bgp statistics
- baseline bridge
- baseline bridge interface
- baseline bridge interface vpls
- baseline ip bgp
- baseline mpls interface 1, 2
- baseline mpls label
- baseline mpls next-hop 1, 2
- BFD (Bidirectional Forwarding Detection)
- BGP (Border Gateway Protocol)
- access lists
- administrative distance
- administrative shutdown 1, 2
- advertising networks in ASs
- advertising routes conditionally
- advertising two best routes
- aggregator path attribute
- AS-path attribute
- atomic-aggregate path attribute
- authentication on TCP connection
- automatic fallover
- automatic summarization of routes
- backdoor routes
- BFD
- BGP/MPLS VPNs
- capabilities
- capability negotiation
- changing BGP policies
- checking AS number from external peer
- Cisco-proprietary route refresh capability
- community lists
- community path attribute
- conditional advertising
- configuration inheritance
- configuring
- cooperative route filtering capability
- default next-hop address
- deleting BGP sessions 1, 2
- deprecated dynamic capability negotiation capability 1, 2
- dynamic capability negotiation capability 1, 2
- dynamic peering
- EBGP
- ECMP 1, 2
- enable BGP routing
- enable routing
- enable routing for BGP/MPLS VPNs 1, 2
- End-of-RIB marker
- extended community path attribute
- features
- four-octet AS numbers capability
- graceful restart
- IBGP
- inheritance of configuration values
- keepalive message
- keepalives and BFD
- L2VPNs, configuring
- lenient behavior for error recovery
- link-local next hops
- local-pref path attribute
- messages
- monitoring
- multiexit discriminator path attribute
- multiprotocol extensions
- multiprotocol extensions capability
- neighbors and peer groups, shutting down
- next-hop path attribute
- notification message
- open message
- originator-ID path attribute
- passive peers
- path
- path attribute
- path selection process
- peer (neighbor)
- peer groups
- peer type, set the
- platform considerations
- policies, soft reconfiguration of
- promiscuous peers
- reapplying BGP policies
- redistributing BGP routes
- reduce the number of meshed peers
- remove BGP dynamic peers
- resetting BGP sessions 1, 2
- route refresh capability
- route-refresh message
- routes, using for other protocols
- running out of memory
- sessions
- shutting BGP down when low on memory
- speaker
- synchronization
- troubleshooting
- update message
- VPLS, configuring
- bgp commands See also show bgp ipv6 commands
- bgp advertise-best-external-to-internal
- bgp advertise-inactive
- bgp always-compare-med 1, 2
- bgp bestpath med confed
- bgp client-to-client reflection
- bgp cluster-id
- bgp confederation identifier
- bgp confederation peers 1, 2
- bgp dampening
- bgp default ipv4-unicast
- bgp default local-preference 1, 2
- bgp default route-target filter
- bgp enforce-first-as
- bgp fast-external-fallover
- bgp log-neighbor-changes
- bgp redistribute-internal
- bgp shutdown
- bgp graceful-restart commands
- BGP-based VPLS See VPLS (virtual private LAN service)
- BGP/MPLS VPNs
- address family, disabling default
- applications
- AS number
- BGP advertising rules for routes
- BGP sessions, configuring
- customer edge device
- data transport
- default route to shared interface
- ECMP 1, 2
- ECMP indirect next hops
- export list
- export map, setting the
- extended community, route target
- fallback global
- fallback global example 1, 2
- fast reconvergence 1, 2
- full mesh VPN
- global export map
- global import map to import specific routes
- hub-and-spoke VPN
- IGP routes, advertising
- IGPs, configuring on VRF
- import list
- import map, setting the
- inter-AS (interprovider) services
- intra-AS services
- IPv6 over IPv4 1, 2
- L2VPNs and
- L2VPNs, configuring
- label-switching routers 1, 2
- labeled and unlabeled routes, sending
- labeled unicast routes, processing
- labeled VPN routes, processing
- maximum routes
- MP-Reach-NLRI attribute
- MP-Unreach-NLRI attribute
- MPLS labels
- next hops, check reachability 1, 2
- OSPF backdoor link
- OSPF configuration
- parent VR, peering with VRF 1, 2
- path failure, ECMP
- peering between VRF and parent VR 1, 2
- platform considerations
- provider core routers
- provider edge routers
- pruning failed ECMP paths
- reachability of next hops 1, 2
- route distinguisher
- route processing by BGP
- route target
- route-target filtering, disabling
- secondary routing table lookup
- setting maximum route limits
- static routes to shared IP interface
- static routes, advertising
- traffic flow from Internet to VPN
- transporting packets
- unlabeled unicast routes, processing
- update message enhancement
- VPLS
- VPLS, configuring
- VPN topologies, configuring with route targets
- VPN-IPv4 address
- VPNs between ASs
- VPNs within an AS
- VRF
- Bidirectional Forwarding Detection. See BFD
- Border Gateway Protocol. See BGP
- bridge commands
- bridging, transparent
- bundle messages, MPLS
- bypass tunnels, MPLS RSVP-TE
C
- candidate ports
- capabilities, BGP
- capability codes
- capability negotiation, BGP
- carrier-of-carriers IPv4 VPNs
- carrier-of-carriers IPv6 VPNs
- CE (customer edge device) 1, 2
- CE-side load balancing
- cell aggregation See concatenation
- cell relay encapsulation
- for a single VC and multiple VCs
- cell relay encapsulation, VCC. See VCC cell relay encapsulation
- CIDR (Classless Interdomain Routing)
- cleanout-timeout-factor command 1, 2
- clear
- clear bgp ipv6 commands
- clear BGP sessions
- clear bridge commands
- clear commands
- clear ip bgp commands
- clear ip bgp 1, 2, 3
- clear ip bgp dampening 1, 2, 3, 4
- clear ip bgp dynamic-peers
- clear ip bgp redistribution
- clear ip bgp soft prefix-filter
- clear ip bgp wait-end-of-rib 1, 2
- clear ip commands
- clear mpls commands
- codes, BGP capability
- communities, BGP
- community lists, BGP
- concatenation
- confederations
- configuration example
- for multiple ATM virtual circuits transport
- connectivity verification
- at egress nodes
- using ping feature for
- connectivity, verify and troubleshoot MPLS
- conventions
- cooperative route filtering capability
- core non-VPN RIB 1, 2
- core VPN RIB 1, 2
- cross-connects, local 1, 2, 3, 4
- customer edge (CE) device
- customer support
D
- data path failure
- data plane failures
- deaggregation, LDP FEC
- debug commands
- default routes
- default-fields commands
- default-information originate command
- delay period
- for sending MPLS echo responses
- in Echo Jitter TLV
- specifying in Echo Jitter TLV
- detecting RIP data path failure
- disable-dynamic-redistribute command
- discovery, LDP
- distance bgp command 1, 2
- documentation set
- domain, VPLS
- DS-BGP routers
- dual-stack BGP routers
- dynamic capability negotiation
- dynamic interfaces, created by MPLS
- dynamic peering, BGP
- dynamic peers, remove BGP
- dynamic route redistribution, disabling in BGP
- dynamically learned defaults
E
- E-LSP 1, 2
- EBGP (external Border Gateway Protocol)
- Echo Jitter TLV
- contained in echo responses
- detecting data plane failures
- functions of
- invalid in echo responses
- not contained in echo requests
- preconfigured value, default
- supported delay period
- to process MPLS LSP ping messages
- type value defined in
- type value, 12
- used in MPLS echo request packets
- uses
- echo reply packets, MPLS
- echo request packets, MPLS
- ECMP (equal-cost multipath)
- Egress Address P2MP Responder Identifier sub-TLVs
- enable a protocol
- enable protocols
- encapsulations
- equal-cost multipath support on MPLS
- Ethernet aggregation and Martini layer 2 transport
- Ethernet raw mode encapsulation
- Ethernet/VLAN over MPLS (Multiprotocol Label Switching)
- exit-address-family command 1, 2, 3, 4, 5
- explicit null label, advertise the
- export map
- extended communities
- BGP 1, 2
- route target
- external administrative distance, BGP
- external BGP
F
- F4 OAM cells
- not carried on the same pseudowire as data cells
- F5 Operations Administration and Maintenance (OAM) cells
- and transmission of data cells over the same pseudowire
- fast reroute extension, MPLS
- FEC aggregation, LDP
- FEC deaggregation, LDP
- filter lists, BGP
- four-octet AS number capability
- Frame Relay
- over MPLS
G
- global export map
- global import map
- global import map to import specific routes
- graceful restart
- graceful restart capability
H
- hard clear of BGP sessions
- hardware limitations
- with ATM line modules
- HDLC (High-Speed Data Link Control) layer 2 services over MPLS
- hello commands
- hello messages
- hub-and-spoke topologies, configure with route targets
I
- IBGP ( internal Border Gateway Protocol)
- IBGP (internal Border Gateway Protocol)
- IETF draft, Detecting Data Plane Failures in Point-to-Multipoint Multiprotocol Label Switching (MPLS) - Extensions to LSP Ping
- definition of type value for
- IGP (interior gateway protocol)
- IGP-LDP synchronization
- import map
- index command
- inheritance of BGP configuration values
- instances, L2VPN
- instances, VPLS
- Integrated Local Management Interface (ILMI) cells
- and transmission along with data cells on the same pseudowire
- inter-AS (interprovider) services
- interface commands
- interface tunnel command
- interfaces
- interior gateway protocol See IGP
- internal administrative distance, BGP
- internal BGP. See IBGP
- internet community, BGP
- interoperability with Junos OS
- of MPLS LSP ping in JunosE Software
- intra-AS services
- IP addresses
- ip commands
- ip as-path access-list 1, 2
- ip bgp-community new-format
- ip bgp-confed-as-set new-format
- ip community-list
- ip explicit-path command. See mpls commands, mpls explicit-path
- ip extcommunity-list
- ip prefix-list
- ip prefix-tree
- ip route 1, 2
- ip route vrf
- ip route-type
- ip router-id 1, 2
- ip mpls commands
- ip rsvp commands See mpls rsvp commands for all other ip rsvp commands
- ip rsvp bandwidth.
- mpls bandwidth See mpls commands; mpls bandwidth
- ip vrf commands
- IPv4 Egress Address P2MP Responder Identifier
- in echo requests containing
- inclusion in echo requests
- using in echo requests
- IPv4 Node Address P2MP Responder Identifier
- in echo requests containing
- inclusion in echo requests
- using in echo requests
- IPv6 Egress Address P2MP Responder Identifier
- in echo requests containing
- Multicast LDP FEC Stack sub-TLVs 1, 2
- RSVP P2MP Session sub-TLVs
- inclusion in echo requests
- using in echo requests
- IPv6 islands
- IPv6 Node Address P2MP Responder Identifier
- in echo requests containing
- inclusion in echo requests
- using in echo requests
- IPv6 VPNs
K
- keepalive messages
L
- L-LSP 1, 2
- L2VPN address family 1, 2, 3, 4, 5, 6
- l2vpn commands
- L2VPNs (Layer 2 Virtual Private Networks)
- labels, switching of MPLS
- layer 2 services over MPLS
- 802.3ad switch
- AAL0 encapsulation
- AAL5 encapsulation
- ATM passthrough
- candidate ports
- CE-side load balancing
- CE-side MPLS L2VPNs over LAG
- configuration example
- configuring
- configuring shim interfaces 1, 2, 3
- control word
- control word support for ATM passthrough
- Ethernet aggregation
- Ethernet raw mode encapsulation
- Ethernet/VLAN connections
- Frame Relay example
- HDLC
- how they work
- interfaces supported
- load-balancing
- local cross-connects 1, 2, 3, 4
- monitoring
- MPLS L2VPN over LAG, configuration example
- MPLS L2VPN over VLAN over LAG, configuration example
- multiservice traffic, interface stacking for
- overview
- platform considerations
- ports, candidate
- references for
- S-VLAN subinterface with an untagged C-VLAN ID
- VCC cell relay encapsulation, ATM
- LDP (Label Discovery Protocol)
- ATM n-to-one VCC cell transport (0x0009) pseudowire (PW) type
- bringing up on the pseudowire
- LDP (Label Distribution Protocol)
- authentication, MD5
- autoconfiguration
- basic discovery
- configuring for VPLS signaling
- discovery mechanisms
- extended discovery
- FEC aggregation
- FEC deaggregation
- graceful restart
- graceful restart configuration tasks
- LDP-IGP synchronization
- link hellos and discovery
- messages
- overview
- peer discovery
- targeted hellos and discovery
- LDP-based VPLS. See VPLS (virtual private LAN service)
- lenient behavior, BGP
- link hellos and LDP basic discovery
- list command
- liveness detection
- load balancing
- local administrative distance, BGP
- local cross-connects 1, 2, 3, 4
- local-pref attribute, BGP
- LSP ping functionality
- in point-to-multipoint LSPs with egress nodes
- in routers other than E Series routers
- verifying connectivity of point-to-multipoint LSPs
- LSP preemption
- LSRs (label-switched routers)
- testing connectivity in point-to-multipoint LSPs
M
- manuals
- maps
- Martini ATM virtual circuits
- over a single pseudowire See also ATM virtual circuits
- transmission of subset of
- transportation of cells from multiple circuits
- Martini circuits
- Ethernet packet distribution
- Ethernet raw mode encapsulation
- over LAG
- over VLAN over LAG
- with two pseudowires
- Martini circuits over LAG
- Martini layer 2 transport
- match commands
- maximum route limit, BGP/MPLS VPN
- maximum route warning threshold, BGP/MPLS VPN
- maximum-paths command
- member interface command
- meshed peers, reduce BGP
- messages, BGP
- MPLS (Multiprotocol Label Switching) See also layer 2 services over MPLS; LDP; RSVP-TE
- accounting resources
- adjacency messages, LDP
- administrative weight
- admission control
- announcing endpoints
- attribute flags
- authentication
- backup, LSP
- bandwidth
- baselining statistics
- BGP/MPLS VPNs
- bundle messages
- bypass tunnels
- class of service bits
- configuration
- configuring Ethernet/S-VLAN over 1, 2
- connectivity, verify and troubleshoot
- constraint-based routing
- conventional IP routing
- data mapping 1, 2
- differentiated services, tunnel models for
- discovery of directly connected peers
- discovery of nondirectly connected peers
- discovery, LDP
- downstream node
- downstream-on-demand
- downstream-unsolicited
- dynamic interfaces, creating
- echo reply packets
- echo request packets
- ECMP
- egress forwarding actions
- EXP bits
- experimental bits
- explicit null label
- explicit path
- explicit routing
- fast reroute extensions
- fast reroute on SONET/SDX interfaces
- features, supported
- FEC
- flooding frequency
- flooding thresholds
- forwarding equivalency class 1, 2
- glossary
- hard-state protocol
- implicit null label
- interface label space
- L2VPNs, configure VPWS
- label distribution protocols
- label-switching router
- labels
- layer 2 services over
- LDP. See LDP (Label Distribution Protocol)
- local cross-connects 1, 2, 3
- loose hop
- LSP (label-switched path)
- LSR (label-switching router)
- major interface statistics
- message ack object
- message ID object
- monitoring
- node
- objects, RSVP-TE
- ordered control
- OSPF, configuring
- overview 1, 2
- path options for backup
- penultimate hop popping
- platform considerations
- platform label space
- preemption
- reachability, verify and troubleshoot
- refresh messages
- resource requirements
- resources, configuring
- route pinning
- RSVP-TE. See RSVP-TE (Resource Reservation Protocol with traffic engineering extensions)
- S bit
- shim header
- shim interfaces, configuring 1, 2, 3
- soft-state protocol 1, 2
- srefresh messages
- stacking labels
- statistics
- statistics, major interface
- strict hop
- summary refresh messages
- swapping labels
- switching labels
- switching vs routing
- TLVs for ping
- topology-driven LSPs
- trace network connections
- traffic engineering
- TTL bits
- TTL processing
- TTL rules for expiration
- tunnel endpoint
- tunnel metric for backup
- tunnel models for differentiated services
- ultimate hop popping
- upstream node
- VPI/VCI and labels
- VPLS, configuring LSPs for
- VPNs
- weight
- mpls commands See also show mpls commands
- mpls 1, 2, 3, 4
- mpls atm vci range
- mpls atm vpi range
- mpls backup-path
- mpls bandwidth
- mpls classifier-list
- mpls create-dynamic-interfaces 1, 2
- mpls diff-serv phb-id traffic-class
- mpls disable
- mpls explicit-path
- mpls ip propagate-ttl
- mpls l2-transport load-balancing-group
- mpls lsp no-route retries
- mpls lsp no-route retry-time
- mpls lsp retries
- mpls lsp retry-time
- mpls policy
- mpls policy-list
- mpls reoptimize
- mpls reoptimize timers frequency
- mpls set-exp-bits 1, 2
- mpls statistics label
- mpls statistics next-hop 1, 2
- mpls topology-driven-lsp
- mpls traffic-class
- mpls traffic-eng administrative-weight
- mpls traffic-eng attribute-flags
- mpls traffic-eng flooding threshold
- mpls traffic-eng link-management timers periodic-flooding
- mpls tunnel-model
- mpls tunnels profile
- mpls-relay 1, 2, 3, 4, 5, 6, 7
- mpls-relay atm cell-packing mcpt-timers
- mpls-relay atm vpi-range
- MPLS echo reply packets
- testing network connectivity
- MPLS echo request packets
- testing network connectivity
- MPLS echo requests
- excluding P2MP Responder Identifier TLV from
- including P2MP Responder Identifier TLV in
- inclusion of sub-TLVs of P2MP Responder Identifier TLV in
- sent to nodes other than egress nodes in MPLS LSPs
- specifying
- without P2MP Responder Identifier TLV contained
- MPLS echo responses
- containing Echo Jitter TLV
- controlled by Response Type filed in requests
- delaying sending of
- dependence on position of node
- sent from a particular egress node
- sent from all nodes in the path to ingress
- MPLS L2VPN over LAG
- MPLS L2VPN over VLAN over LAG
- MPLS L2VPNs
- MPLS L2VPNs over LAG
- mpls ldp commands
- mpls ldp 1, 2, 3, 4
- mpls ldp advertise-labels
- mpls ldp autoconfig 1, 2
- mpls ldp deaggregate
- mpls ldp disable
- mpls ldp egress-label
- mpls ldp graceful-restart
- mpls ldp graceful-restart reconnect-time
- mpls ldp graceful-restart recovery-time
- mpls ldp graceful-restart timers max-recovery
- mpls ldp graceful-restart timers neighbor-liveness
- mpls ldp igp sync holddown
- mpls ldp independent-control
- mpls ldp ip-forwarding
- mpls ldp link-hello disable
- mpls ldp neighbor password
- mpls ldp profile 1, 2
- mpls ldp redistribute
- mpls ldp session holdtime
- mpls ldp session keepalive-interval
- mpls ldp session retries
- mpls ldp session retry-time
- mpls ldp strict-security
- mpls ldp sync
- mpls ldp targeted-hello holdtime
- mpls ldp targeted-hello interval
- mpls ldp targeted-hello receive list
- mpls ldp targeted-hello send list
- mpls ldp vpls commands
- MPLS LSPs
- troubleshooting MTU problems in
- MPLS Martini circuits
- adding on an ATM port
- transmission of multiple ATM virtual circuits
- using the RSVP configuration
- MPLS ping feature
- data plane failure detection for egress nodes
- detection of plane failures
- in point-to-multipoint LSPs
- P2MP Responder Identifier TLV
- relation with traceroute requests
- selecting the egress node for tracing path
- testing connectivity in point-to-multipoint LSPs, limitation
- using P2MP Responder Identifier TLV
- verifying connectivity at egress nodes in point-to-multipoint LSPs
- mpls rsvp commands
- mpls rsvp 1, 2
- mpls rsvp authentication
- mpls rsvp authentication key
- mpls rsvp bfd-liveness-detection
- mpls rsvp disable
- mpls rsvp egress-router
- mpls rsvp profile 1, 2, 3
- mpls rsvp signalling hello
- mpls rsvp signalling hello graceful-restart recovery-time
- mpls rsvp signalling hello graceful-restart restart-time
- mpls rsvp signalling node-hello
- mpls-relay atm cell-packing mcpt-timers command
- mpls-relay atm vpi-range command
- mpls-relay command
- prerequisite for configuring
- MTU problems
- determining the exact LSR
- troubleshooting and verifying in
- multicast IPv4 address family 1, 2, 3
- multicast IPv6 address family 1, 2, 3
- Multicast LDP FEC Stack sub-TLVs
- multiexit discriminator, BGP
- multihoming
- multiple ATM VCs transportation
- over a single pseudowire
- multiple ATM virtual circuits
- transmission over a single pseudowire
- Multiprotocol Label Switching. See MPLS (Multiprotocol Label Switching)
- multiservice layer 2 services
N
- neighbor commands
- neighbor activate 1, 2, 3, 4
- neighbor advertise-map
- neighbor advertisement-interval
- neighbor allow
- neighbor allowas-in
- neighbor bfd-liveness-detection
- neighbor capability 1, 2
- neighbor default-originate
- neighbor description
- neighbor distribute-list
- neighbor ebgp-multihop
- neighbor filter-list
- neighbor ibgp-singlehop
- neighbor lenient
- neighbor local-as
- neighbor maximum-orf-entries
- neighbor maximum-prefix
- neighbor maximum-update-size
- neighbor next-hop-self 1, 2, 3, 4
- neighbor passive
- neighbor password
- neighbor peer-group
- neighbor peer-type
- neighbor prefix-list 1, 2
- neighbor prefix-tree
- neighbor remote-as 1, 2
- neighbor remote-as’
- neighbor remove-private-as
- neighbor rib-out disable
- neighbor route-map
- neighbor route-reflector-client
- neighbor send-community
- neighbor send-label
- neighbor shutdown
- neighbor site-of-origin
- neighbor soft-reconfiguration inbound
- neighbor timers
- neighbor unsuppress-map
- neighbor update-source 1, 2
- neighbor weight 1, 2
- neighbor graceful-restart commands
- neighbor weights (BGP), assign neighbor weights
- neighbors (peers), BGP
- network area command
- network commands
- network connections, trace MPLS
- network prefixes, filtering
- next hops, check reachability for BGP/MPLS VPNs 1, 2
- next-address command
- next-hop processing, BGP
- next-hop routers
- no synchronization command
- no-advertise community, BGP
- no-export community, BGP
- Node Address P2MP Responder Identifier Sub-TLVs
- Node Address P2MP Responder Identifier sub-TLVs
- sending of echo responses
- specifying
- nontransit service
- notice icons
- notification message, BGP
O
P
- P routers
- P2MP Responder Identifier TLV
- conditions for echo response to originator
- detecting data plane failures
- difference in type value for
- echo response to originator
- excluded from echo requests
- including in
- IP address in the TLV matching with interface IP address
- IP address in the TLV not matching with interface IP address
- multiple sub-TLVs included in
- supported sub-TLVs for
- to process MPLS LSP ping messages, echo requests
- tracing the path from an ingress node
- type number, 11
- type value defined in
- type value reconciliation between
- without sub-TLVs included in
- parallel routes, maximum number of
- passive peers, BGP
- passthrough for ATM over MPLS
- path attribute, BGP
- path trigger delay command
- path, BGP
- PE routers
- peer groups, BGP
- peer reachability
- peer type, set the BGP
- peers (neighbors), BGP
- per-hop behavior
- per-hop scheduling class
- performance impact
- PHB. See per-hop behavior
- ping feature for MPLS networks
- connectivity verification
- unavailable in point-to-multipoint LSPs
- ping feature in MPLS networks
- detecting data plane failures for egress nodes
- P2MP Responder Identifier TLV
- relation with traceroute requests
- selecting the egress node for tracing path
- verifying connectivity at egress nodes in point-to-multipoint LSPs
- ping mpls commands
- detecting plane failures
- for detection of data plane failures
- ping mpls ip
- ping mpls l2transport
- ping mpls l3vpn
- ping mpls rsvp tunnel
- ping mpls vpls
- platform considerations
- point-to-multipoint LDP LSPs
- error response
- point-to-multipoint LSPs
- traceroute requests
- point-to-multipoint MPLS LSPs
- configuring routers as egress nodes in
- connectivity verification
- detecting plane failures in
- TLVs for verifying connectivity at egress nodes
- point-to-point MPLS LSPs
- detection of plane failures in
- troubleshooting and verifying MTU problems in
- policies
- policies, test BGP
- policies, VPLS subscriber. See subscriber policies for VPLS
- prefixes
- promiscuous peers, BGP
- provider core routers. See P routers
- provider edge routers. See PE routers
- PSC. See per-hop scheduling class
- pseudowire (PW) type
- used for cell relay encapsulation of a single VC
- used for cell relay for a single VC
- used for cell relay for multiple VCs
- pseudowires
- associating an ATM port with
- configuration on both ends of the
- failure detection
- multiple ATM virtual circuits
- transportation of multiple ATM virtual circuits
- using a single wire for multiple VCs transport
- PWid FEC element TLV, for VPLS with LDP signaling
R
- reachability
- reconvergence of BGP/MPLS VPN networks, fast 1, 2
- redistribute command
- redistribution routes
- refresh messages, MPLS
- refresh-period command 1, 2
- reoptimization and backup
- reset BGP sessions
- Response Type field
- RFC 4364—BGP/MPLS IP Virtual Private Networks (VPNs) (February 2006) 1, 2
- RFC 4816—Pseudowire Emulation Edge-to-Edge (PWE3) Asynchronous Transfer Mode (ATM) Transparent Cell Transport Service (February 2007)
- RIB (routing information base)
- core non-VPN RIB 1, 2
- core VPN RIB 1, 2
- disabling RIBs-Out
- rib-out disable command
- route distinguisher
- route interface command
- prerequisite for configuring
- route interface tunnel command
- prerequisite for configuring
- route maps, BGP
- route reflectors
- route target
- route targets
- route- refresh message , BGP
- route-map command
- route-refresh capabilities
- route-target address family 1, 2
- router commands
- router bgp 1, 2, 3, 4
- router ospf
- routes
- routing and forwarding instance. See VRF
- routing table
- routing, BGP
- routing, IP
- RSVP P2MP IPv4 Session sub-TLV
- contained in the Target FEC Stack TLV
- detecting data plane failures
- type number of
- validation of point-to-multipoint LSP ping feature
- RSVP P2MP Session sub-TLVs
- RSVP-TE (Resource Reservation Protocol with traffic engineering extensions)
- RSVP-TE protocol
- configuring routers as egress nodes
- validation with
S
- S-VLAN Subinterface with an Untagged C-VLAN ID
- S-VLANs (stacked virtual local area networks)
- SAR scheduler
- scaling limitation
- scaling limitations
- scalability considerations
- transmission of multiple ATM VCs over a single pseudowire
- scaling limitations
- on SAR scheduler
- sessions, BGP
- assigning interface to
- reset and clear
- resetting and clearing 1, 2
- set commands
- shim interfaces
- configuring VCI/VPI ranges
- shim interfaces, MPLS 1, 2, 3
- show atm commands
- show bridge commands
- show cac commands
- show configuration commands
- show ip bgp commands
- show ip bgp commands
- show ip bgp l2vpn 1, 2
- show ip bgp l2vpn vpls
- show ip bgp next-hops 1, 2
- show ip commands
- show ipv6 commands
- show l2vpn commands
- show ldp commands
- show mpls commands
- show mpls 1, 2, 3
- show mpls binding
- show mpls cross-connects atm
- show mpls explicit-paths
- show mpls fast-reroute database
- show mpls forwarding 1, 2, 3, 4
- show mpls interface
- show mpls interface shim
- show mpls l2transport interface
- show mpls next-hop
- show mpls phb-id
- show mpls profile
- show mpls rsvp
- show mpls rsvp authentication
- show mpls rsvp bfd interfaces
- show mpls rsvp counters
- show mpls rsvp hello graceful restart
- show mpls rsvp hello instance
- show mpls rsvp profile.
- show mpls profile See show mpls commands show mpls profile
- show mpls tunnels
- show mpls tunnels profile.
- show mpls profile See show mpls commands show mpls profile
- show mpls ldp commands See show ldp commands
- show subscriber-policy command
- show vpls connections command
- signaling, VPLS
- single-hop IBGP peers
- soft clear of BGP sessions
- speakers, BGP
- srefresh messages
- subscriber policies for VPLS
- subset of ATM virtual circuits
- transportation over a single pseudowire
- summary refresh messages, MPLS
- summary-only keyword (aggregate-address)
- support, technical See technical support
- switch, 802.3ad
- synchronization
- synchronization command
T
- table-map command
- targeted hellos and LDP extended discovery
- targeted sessions, for VPLS with LDP signaling
- technical support
- test bgp ipv6 command
- test ip bgp neighbor command 1, 2
- text and syntax conventions
- timers bgp command
- topology-driven LSPs, MPLS
- trace mpls commands
- for detection of data plane failures
- trace mpls ip
- trace mpls l2transport
- trace mpls l3vpn
- trace mpls rsvp tunnel
- trace mpls vpls
- traceroute requests
- in point-to-multipoint LSPs
- responses to
- sent by ingress nodes
- transit service
- transparent bridging and VPLS
- transport virtual router, configure for VPLS
- transportation of multiple ATM VCs
- over a single pseudowire
- trigger delay
- troubleshooting
- TTL processing, MPLS
- tunnel commands
- tunnel mpls commands
- tunnel mpls affinity 1, 2
- tunnel mpls autoroute announce 1, 2
- tunnel mpls autoroute metric 1, 2
- tunnel mpls bandwidth 1, 2
- tunnel mpls description 1, 2
- tunnel mpls diff-serv phb-id
- tunnel mpls fast-rerout
- tunnel mpls lsp retries 1, 2
- tunnel mpls lsp retry-time 1, 2
- tunnel mpls no-route retries 1, 2
- tunnel mpls no-route retry-time 1, 2
- tunnel mpls path-option 1, 2, 3, 4
- tunnel mpls priority 1, 2
- tunnels
U
V
- VCC (virtual channel connection) cell relay encapsulation, ATM
- VCI/VPI ranges
- configuration dependent on
- configuration for multiple VCs transmission
- requirements for configuration of
- VEs (VPLS edge devices)
- virtual channel connection. See VCC cell relay encapsulation
- virtual private LAN service. See VPLS (virtual private LAN service)
- Virtual Private Wire Service. See VPWS (virtual private wire service L2VPNs)
- VPI/VCI ranges
- configuring for multiple VCs transport
- configuring using
- matching configurations
- maximum number supported
- mismatching configurations
- number of ATM VCs in the specified configuration
- VPLS (virtual private LAN service)
- BGP-based
- address families, configuring
- BGP signaling, configuring 1, 2
- BGP/MPLS VPNs
- configuration example
- configuration tasks for BGP signaling
- L2VPN address family 1, 2
- loopback interface and router ID, configuring
- sample topology, configuring
- signaling overview
- VPLS address family 1, 2
- VPLS instances for BGP signaling, configuring
- CEs (customer edge devices)
- clear
- configure
- features supported
- forwarding tables
- instances
- LDP-based
- module support
- monitor
- multihoming
- network interfaces
- platform considerations
- references
- subscriber policies on
- transparent bridging, comparison to
- transport virtual router, configure
- VEs (VPLS edge devices)
- virtual core interfaces
- VPLS domains
- VPLS address family 1, 2, 3, 4, 5
- VPLS edge devices. See VEs
- VPN-IPv4
- VPN-IPv4 address family 1, 2, 3
- VPN-IPv6 address family 1, 2, 3
- VPNs (virtual private networks
- VPNs (virtual private networks)
- VPWS (virtual private wire service L2VPNs)
- address families, configure
- BGP signaling, configuring
- BGP/MPLS VPNs
- CE (customer edge device)
- clear
- components
- configuration example
- configure
- features supported
- instances
- interfaces
- L2VPN address family
- module support
- monitor
- MPLS, configure
- network interfaces
- overview
- PE (provider edge router)
- platform considerations
- references
- VPWS address family 1, 2
- VPWS address family 1, 2, 3, 4, 5, 6
- VRF (VPN routing and forwarding instance)
W
