address transmit-delay

[ no ] address { ipAddress | unnumbered interfaceType interfaceSpecifier }
transmit-delay transmDelay

Command introduced before JunosE Release 7.1.0.

Sets the estimated time it takes to transmit a link-state update packet on the interface. The no version restores the default value.

Note: You must issue the address area command before issuing this command.

ipAddress—OSPF interface address previously specified with the address command
unnumbered—Indicates that OSPF is running on an unnumbered interface previously specified with the address command
- interfaceType—Interface type; see Interface Types and Specifiers
- interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers
transmDelay—Link-state transmit delay, a number in the range 0–3600 seconds; default value is 1 second

Router Configuration