address cost

[ no ] address { ipAddress | unnumbered interfaceType interfaceSpecifier } cost intfCost

Command introduced before JunosE Release 7.1.0.

Specifies a cost metric for an OSPF interface. Used in the calculation of the SPF routing table. The no version resets the path cost to the default.

Note: You must issue the address area command before issuing this command.

ipAddress—OSPF interface address previously specified with the address command
unnumbered—Indicates that OSPF is running on an unnumbered interface previously specified with the address command
- interfaceType—Interface type; see Interface Types and Specifiers
- interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers
intfCost—Link-state metric cost; a number in the range 0–65535; default value is 10

Router Configuration