ERX 12.1.x Hardware Guide
Copyright and Trademark Information- Table of Contents
-
About the Documentation - Product Overview
- Initial Installation
- Hardware Maintenance, Replacement, and Troubleshooting Procedures
- Maintaining ERX Routers
- Required Tools and Items
- Storing Modules and Components
- Cleaning the System
- Upgrading JunosE Software
- Upgrading NVS Cards on SRP Modules
- Replacing an NVS Card
- Upgrading Memory on SRP Modules
- Replacing SFPs on I/O Modules
- Replacing Fan Trays
- Installing a ERX14xx Model Air Filter
- Installing a Cable-Management Bracket on ERX7xx Models
- Replacing a Power Input Module
- Troubleshooting
-
- Appendixes
- System Specifications
- Installation Guidelines and Requirements
- Your Preinstallation Responsibilities
- Environmental Requirements
- Regulatory Compliances
- Safety Guidelines
- Equipment Rack Requirements
- Cabling Recommendations
- Product Reclamation and Recycling Program
- Hardware Compliance
- Federal Communications Commission (FCC) Statement
- FCC Requirements for Consumer Products
- Food and Drug Administration, Center for Devices and Radiological
Health
- Canadian Department Of Communications Radio Interference Regulations
- Réglement sur le brouillage radioélectrique du
ministère des communications
- Industry Canada Notice CS-03
- Avis CS-03 d'Industrie Canada
- D.O.C. Explanatory Notes: Equipment Attachment Limitations
- Notes explicatives du ministère des Communications:
limites visant les accessoires
- EC Declaration of Conformity
- Voluntary Control Council for Interference (VCCI) Statement
for Japan
- Cable Pinouts
- Contacting Customer Support and Returning Hardware
- Declaration of Conformity
-
- Index
Symbols
- 10-Gbps SRP module
- 10/100Base-T port 1, 2, 3
- –48 VDC
A
- access line modules
- access, management
- setting up console 1, 2
- SNMP 1, 2
- Telnet setup
- accessing fan tray
- agency certification 1, 2, 3, 4
- air filter
- airflow
- rack-mounted installation and
- specifications 1, 2, 3
- alarm ports
- amperage 1, 2, 3
- antistatic bags and containers
- assembly numbers, locating
- assigning an IP address
B
C
- cable-management bracket
- cables
- cabling
- ERX routers
- HSSI connectors
- RJ-45 connectors 1, 2
- SC duplex connectors 1, 2
- SRP I/O modules 1, 2
- X.21/V.35 connectors
- Case Manager
- certifications 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
- circulation, air
- classification, packet
- cleaning
- CLI (command-line interface)
- clock source input ports
- clocking problems
- color code, power cable
- combinations of line modules
- command-line interface
- compliance
- components
- configuring cables 1, 2
- configuring management access
- configuring Telnet
- connecting console to router
- connectors, pinouts
- console
- consumption, power 1, 2, 3, 4
- conventions
- current (electrical) requirements 1, 2, 3
- customer support
D
- DB-9 connector 1, 2, 3, 4, 5
- DC power 1, 2
- detecting double-bit error
- Device Management System, NMC-RX
- diagnosing problems
- diagnostic LEDs
- dimensions of ERX routers 1, 2, 3
- dissipation, heat 1, 2, 3
- distribution rack
- documentation set
- double-bit errors
E
- EIA distribution rack
- ejectors, module
- electrical requirements 1, 2, 3, 4
- electronic equipment, recycling
- environmental requirements
- ERX14xx models
- ERX310 Broadband Services Router
- ERX310 router
- ERX705 router
- ERX7xx models
- ESD (electrostatic discharge)
- ESD grounding jack, chassis
- Ethernet link
- external timing ports
- E Series routers
- assigning IP address to
- cabling
- cabling recommendations
- dimensions 1, 2, 3
- electrical requirements 1, 2, 3
- hardware
- installing 1, 2
- installing components
- installing modules
- lifting 1, 2
- maintenance
- management access 1, 2
- models
- modules
- power requirements 1, 2, 3
- powering down
- powering up
- safety guidelines 1, 2, 3
- site planning
- slot groups and identification
- space requirements
- troubleshooting 1, 2
F
G
H
- halt command 1, 2
- hardware
- cable configuration 1, 2
- reclamation and recycling
- redundancy features
- repairing and replacing
- hazardous materials, reclamation and recycling
- heat dissipation 1, 2, 3, 4
- high-availability mode
- hot-swapping
- HSSI connectors, cabling
- humidity requirements 1, 2, 3
- HyperTerminal
I
- I/O modules
- installing ERX routers
- installing modules
- installing NVS cards 1, 2
- installing redundancy I/O modules
- installing redundancy midplane
- installing SFPs
- installing spare line modules
- IP address, assigning
J
L
M
- maintenance, system
- management access
- setting up console 1, 2
- SNMP 1, 2
- Telnet setup
- Management Information Bases
- management port
- managing modules
- manuals
- mechanical requirements for distribution rack
- memory, upgrading
- MIBs (Management Information Bases)
- midplane
- models
- module reset button
- modules
- monitoring LEDs
- monitoring temperature
- mounting kits
- mounting posts for rack
N
- network management
- setting up console 1, 2
- SNMP 1, 2
- Telnet setup
- NMC-RX Device Management System
- notice icons
- NVS cards
O
P
- packaging, recycling
- packet classification
- packing instructions
- PCMCIA slot, SRP modules
- performance rate, line modules
- PIM
- pinouts, router cables and connectors
- planning site for installation
- plenum
- ports
- alarm
- external timing
- management
- redundancy 1, 2
- status LEDs
- power
- power cord warnings
- power input module
- power requirements 1, 2, 3
- power switches 1, 2
- powering down router
- powering up router
- preinstallation responsibilities
- preparing site for installation
- primary SRP module
- problems
- product numbers, locating
Q
R
- rack, distribution
- reclamation and recycling
- recycling Juniper Networks equipment
- redundancy
- redundancy features (hardware)
- fans
- line modules
- ports 1, 2
- SRP modules
- redundancy midplane
- REDUNDANT LED
- release mechanisms for SFPs
- removing components
- removing modules
- removing SFPs
- repacking components
- repairing hardware components
- replacing components
- replacing modules
- replacing NVS cards 1, 2
- replacing SFPs 1, 2
- reset button, module
- Restriction of Hazardous Substances (RoHS) Directive, recycling equipment
- Return Materials Authorization
- returning product
- RJ-45 connectors, cabling 1, 2
- RMA
- RoHS (Restriction of Hazardous Substances) Directive, recycling equipment
- RS-232 port 1, 2, 3, 4
S
- safety
- SC duplex connectors, cabling 1, 2
- self-testing, modules
- serial numbers, locating
- SFPs (small form-factor pluggable transceivers)
- show configuration command
- show environment command 1, 2
- show hardware command
- show version command 1, 2
- show interface gigabitEthernet command
- site planning
- size
- slot disable command
- slot groups
- small form-factor pluggable transceivers
- SMB connectors
- SNMP for management access 1, 2
- SODIMMs
- software
- space requirements 1, 2, 3, 4, 5
- spare line modules, installing
- specifications
- SRP I/O modules
- cabling 1, 2
- installing
- removing
- SRP modules
- errors on
- installing
- LEDs on 1, 2
- models
- PCMCIA slot
- powering down
- redundancy 1, 2
- removing 1, 2
- standby SRP module
- starting ERX routers
- status, redundancy
- storing, modules and components
- support, technical See technical support
- switches, power 1, 2
- switching on router
- switchover to spare line module
- synchronize command
- system maintenance
T
U
V
- ventilation
- voltage requirements 1, 2, 3
W
- warnings, safety
- Waste Electrical and Electronic Equipment (WEEE) Directive. See WEEE Directive
- WEEE (Waste Electrical and Electronic Equipment) Directive, recycling equipment
- weight
- wrist strap, antistatic
X
