Technical Documentation
Feedback
Documentation Search
Related Documentation
- Configuring the Scheduler Hierarchy for Hashed Load Balancing in 802.3ad Link Aggregation Groups
- Configuring the Scheduler Hierarchy for Subscriber Load Balancing in 802.3ad Link Aggregation Groups
- Creating Parameter Instances
- For more information about other fields displayed with this command, see the JunosE Physical Layer Configuration Guide
- show interfaces lag members
Monitoring the QoS Configuration of IEEE 802.3ad Link Aggregation Group Bundles
Purpose
Display information about the QoS configuration for Ethernet member links in all IEEE 802.3ad link aggregation group (LAG) bundles configured on the router, or about the member links in a specified IEEE 802.3ad LAG bundle.
Action
To display the QoS configuration for a specific LAG bundle:
host1#show interfaces lag lg0 members Lag lg0 is Up, Administrative status is Up MAC Address is 0090.1a40.01be MTU: Operational 1526 Duplex Mode: Operational Full Duplex Speed: Operational 100 Mbps System Priority 32768 System MAC Address is 0090.1a00.00e0 key 8 Partner System Priority 0 System MAC Address is 0000.0000.0000 key 0 QoS parameter: vlan 1500000 Attached QoS profile: eth1 Member-interface FastEthernet11/2 is Up (LACP disabled, state collecting/distributing) Member-interface FastEthernet11/3 is Down (LACP disabled, state waiting) Member-interface FastEthernet11/4 is Up (LACP disabled, state collecting/distributing)
Meaning
Table 1 lists the related show interfaces lag memberscommand output fields.
Table 1: show interfaces lag members Output Fields
Field Name | Field Description |
|---|---|
Lag | Name of the LAG bundle |
QoS parameter | QoS parameter instance at the displayed interface |
Attached QoS profile | QoS profile attachment at the displayed interface |
Related Documentation
- Configuring the Scheduler Hierarchy for Hashed Load Balancing in 802.3ad Link Aggregation Groups
- Configuring the Scheduler Hierarchy for Subscriber Load Balancing in 802.3ad Link Aggregation Groups
- Creating Parameter Instances
- For more information about other fields displayed with this command, see the JunosE Physical Layer Configuration Guide
- show interfaces lag members
Published: 2010-12-20
Copyright© 1999-2011 Juniper Networks, Inc. All rights reserved.
