Technical Documentation
Feedback
Documentation Search
Monitoring the Redundancy Status of SRP Modules
Purpose
Display redundancy information specific to SRP modules.
Action
To display the redundancy status of the SRP modules.
host1#show redundancy srp
high-availability state: active current redundancy mode: high-availability last activation type: warm-switch
To display the redundancy status of the SRP modules in detail.
host1#show redundancy srp detail
high-availability state: disabled current redundancy mode: file-system-synchronization last activation type: cold-start
Criteria Required for High Availability to be Active
----------------------------------------------------
criterion met
---------------------------------------------------- ---
Active SRP hardware supports High Availability? Yes
High Availability mode configured? No
Mirroring Subsystem present? Yes
Mirroring activity levels within limits? Yes
Network Core Dumps disabled? Yes
Running configuration is safe for High Availability? Yes
Standby SRP hardware supports High Availability? Yes
Standby SRP is online and capable of mirroring? Yes
Standby SRP is running the same release? YesMeaning
Table 1 lists the show redundancy srp command output fields.
Table 1: show redundancy srp Output Fields
Field Name | Field Description |
|---|---|
high-availability state | State of high availability mode:
|
current redundancy mode | Redundancy mode currently being used by this router:
|
last activation type | Last type of activation that occurred on the router. The method using which the SRP last booted:
|
Criteria Required for High Availability to be Active | Criteria required for high availability to be active. Note: All criteria must be “yes” for high availability to be active. |
Published: 2010-12-29
Copyright© 1999-2011 Juniper Networks, Inc. All rights reserved.
