undebug ip bgp

Syntax

undebug ip bgp [ in | out ] [ peerAddress [ peerAddressMask ] ]
[ bgpLog ] [ router routerName ] [ filtering-router filteringRouterName ]
[ accessClassName ] [ route-map mapName ]

Release Information

Command introduced before JunosE Release 7.1.0.

Description

Turns off the display of information previously enabled with the debug ip bgp command. There is no no version.

Options

• in—Displays information for inbound events
• out—Displays information for outbound events
• peerAddress—IP address of BGP peer for which information is displayed
• peerAddressMask—Network mask of BGP peer for which information is displayed
• bgpLog—BGP log of interest; one of the following options:
  • dampening—BGP dampening event; route is suppressed or no longer suppressed by route-flap dampening
  • events—BGP finite state machine events and transitions
  • keepalives—BGP keepalive message events
  • next-hops—BGP next hop events
  • updates—BGP routing table update events
• routerName—Name of the virtual router that owns the BGP router for which information is being displayed
• filteringRouterName—Name of the virtual router that owns the access class and route map parameters
• accessClassName—Name of an access list to filter output
• mapName—Name of a route map to filter output

Mode

Privileged Exec