snmp-server enable traps

Syntax

To enable and configure trap severity level on a global basis:

[ no ] snmp-server enable traps [ trapCategory | snmp authentication ]
[ trapfilters trapFilter ]

To specify the trap severity level on a per-category basis:

snmp-server enable traps { trapCategory | snmp authentication } per-category-trapFilters trapFilter

Release Information

Command introduced before JunosE Release 7.1.0.
ip keyword added in JunosE Release 7.1.0.
packetMirror keyword added in JunosE Release 7.2.0.
per-category-trapFilters keyword added in JunosE Release 9.3.0.

Description

Enables and configures global and category-level SNMP trap generation. The no version disables SNMP trap generation globally. There is no no version for the command to specify the trap severity level on a per-category basis.

Options

• trapCategory—SNMP trap category
  • addrPool—Local address pool traps
  • atmPing—E Series router proprietary ATM ping traps
  • bfdmib—BFD MIB traps
  • bgp—BGP state change traps
  • bulkstats—Bulkstats file full and nearly full traps
  • cliSecurityAlert—Security alerts traps
  • dhcp—DHCP traps
  • dismanEvent—Distributed management (disman) event traps
  • dosProtectionPlatform—DoS protection platform traps
  • dvmrp—DVMRP traps
  • dvmrpProp—E Series router proprietary DVMRP traps
  • environment—Power, temperature, fan, and memory utilization traps
  • fileXfer—File transfer status change traps
  • haRedundancy—High availability and redundancy traps
  • inventory—Router inventory and status traps
  • ip—Internet Protocol traps
  • ldp—LDP traps
  • link—SNMP linkUp and linkDown traps
  • log—System log capacity traps
  • mobileIpv4—Mobile IPv4 traps
  • mplste—Mplste traps
  • mrouter—Mrouter traps
  • ntp—E Series router proprietary traps
  • ospf—OSPF traps
  • packetMirror—Secure packet mirroring traps; visible only if packet mirroring is enabled
  • pim—PIM traps
  • ping—Ping operation traps (in disman remops MIB)
  • radius—RADIUS authentication and authorization servers
  • routeTable—Maximum route limit and warning threshold traps; when this trap is generated, the actual value of the exceeded warning threshold is displayed
  • sonet—SONET traps
  • snmp—SNMP coldStart, warmStart, link, and authenticationFailure traps
  • traceroute—Traceroute operation traps (in disman remops MIB)
  • vrrp—VRRP traps
• snmp—Specifies the SNMP coldStart, warmStart, and authenticationFailure traps
• authentication—Specifies the SNMP authenticationFailure trap
• trapFilters—Specifies the trap severity level at a global level; if the per-category trap severity level is not set for a particular category, this setting is applied to that category
• trapFilter—Minimum severity level for filtering traps at a global level or for a specified category
  • emergency—Severity level 0
  • alert—Severity level 1
  • critical—Severity level 2
  • error—Severity level 3
  • warning—Severity level 4
  • notice—Severity level 5
  • informational—Severity level 6
  • debug—Severity level 7
• per-category-trapFilters—Specifies the trap severity level for a particular category; this setting overrides the severity level set at the global level for this category
• trapFilter—Minimum severity level for filtering traps for the specified category

Mode

Global Configuration