show mpls tunnels

Syntax

show mpls [ traffic-eng ] tunnels [ name tunnelName ]
[ role { all | head | tail | middle | remote } | up | down ]
[ source-id sourceAddress [ srcId ] ] [ destination destAddr ]
[ interface interfaceType interfaceSpecifier ] [ brief | count-only ] [ filter ]

Release Information

Command introduced before JunosE Release 7.1.0.

Description

Displays status and configuration for all tunnels or for a specific tunnel in the current router context.

Options

• traffic-eng—Specifies optional keyword for compatibility with non–E Series implementations
• tunnelName—Name of tunnel or minor interface to be displayed
• role—Displays tunnels in which the router has a specified role:
  • all—Displays all tunnels of which the router is a part
  • head—Displays tunnels where the router is the ingress router, or tunnel headend
  • tail—Displays tunnels where router is the egress router, or tunnel tailend (endpoint or destination of the tunnel)
  • middle—Displays tunnels where router is a transit router on the tunnel
  • remote—Displays tunnels where router is a transit router or egress router (tailend)
• up—Displays tunnels that are up
• down—Displays tunnels that are down
• sourceAddress—Source address of tunnels to be displayed
• srcId—Local ID associated with source address of tunnels to be displayed, an integer in the range 0–65535
• destAddress—Destination address of tunnels to be displayed
• interface—Displays information for the specified interface
  • interfaceType—Interface type; see Interface Types and Specifiers
  • interfaceSpecifier—Particular interface; format varies according to interface type; see Interface Types and Specifiers
• brief—Displays only brief or summary information about the tunnels
• count-only—Displays a count for entries that match the specified conditions
• filter—See Filtering show Commands

Mode

Privileged Exec, User Exec