show ipv6 rpf-route

Syntax

show ipv6 rpf-route [ vrf vrfName ] [ ipv6Address [ detail ] | ipv6Prefix [ detail ] ]
[ all ] [ protocol ] [ filter ]

Release Information

Command introduced before JunosE Release 7.1.0.
vrf keyword and vrfName variable added in JunosE Release 7.2.0.

Description

Displays IPv6 routes that the router can use to verify source addresses in multicast packets.

Options

• vrfName—Name of the VRF
• ipv6Address—Specific IPv6 address to show
• ipv6Mask—IPv6 mask of the specific address to show
• detail—displays detailed information about the specified route
• all—Displays routes from all sources to a prefix
• protocol—One of the following protocols for which you want to display the best routes in the routing table; no routes are displayed if routes for the specified protocol are not present in the routing table
  • access—Displays the best access-server routes (BGP) in the routing table
  • access-internal—Displays the best access-internal routes in the routing table
  • bgp—Displays the best BGP routes in the routing table
  • bgp-tunnel—Displays the best BGP tunnel routes in the routing table
  • dvmrp—Displays the best DVMRP routes in the routing table
  • isis—Displays the best IS-IS routes in the routing table
  • ldp—Displays the best LDP tunnel routes in the routing table
  • local—Displays the best locally connected routes in the routing table
  • mbgp—Displays the best MBGP routes in the routing table
  • ospf—Displays the best OSPF routes owned by in the routing table
  • other—Displays the best internal control routes in the routing table
  • rip—Displays the best RIP routes in the routing table
  • rsvp—Displays the best RSVP tunnel routes in the routing table
  • static—Displays the best static routes added by network management to the routing table
  • static-rpf—Displays the best static RPF routes added by network management to the routing table
• filter—See Filtering show Commands

Mode

Privileged Exec, User Exec