neighbor distribute-list

Syntax

neighbor { ipAddress | ipv6Address | peerGroupName } distribute-list
accessListName { in | out }

no neighbor { ipAddress | ipv6Address | peerGroupName } distribute-list
[ accessListName ] { in | out }

Release Information

Command introduced before JunosE Release 7.1.0.
ipv6Address variable added in JunosE Release 8.0.0.

Description

Distributes BGP neighbor information as specified in an access list. The no version removes an entry.

Using distribute lists is one of several ways to filter BGP advertisements. You can also use route maps or use AS-path filters, as with the ip as-path access-list Global Configuration command and the neighbor filter-list command.

Options

• ipAddress—IP address of BGP neighbor
• ipv6Address—IPv6 address of BGP neighbor
• peerGroupName—Name of a BGP peer group. If you specify a BGP peer group by using the peerGroupName argument, all the members of the peer group inherit the characteristic configured with this command, unless it is overridden for a specific peer.
• accessListName—String of up to 32 alphanumeric characters identifying an access list
• in—Applies list to incoming routes (inbound policy)
• out—Applies list to outgoing routes (outbound policy); you cannot configure a member of a peer group to override the inherited peer group characteristic for outbound policy

Mode

Address Family Configuration, Router Configuration