Hide Navigation Pane
Show Navigation Pane
Feedback
Download
SHA1
Table of Contents
- About the Documentation
- Internet Protocol Version 4
- Configuring IPv4 Multicast
- IPv4 Multicast Overview
- Platform Considerations
- References
- Before You Begin
- Configuring the Switch Fabric Bandwidth
- Enabling IP Multicast
- Defining Static Routes for Reverse-Path Forwarding
- Displaying Available Routes for Reverse-Path Forwarding
- Enabling and Disabling RPF Checks
- Using Unicast Routes for RPF
- Defining Permanent IP Multicast Forwarding Entries
- Defining a Multicast Bandwidth Map
- Configuring Multicast QoS Adjustment
- Activating Multicast QoS Adjustment Functions
- Configuring Hardware Multicast Packet Replication
- Blocking and Limiting Multicast Traffic
- Deleting Multicast Forwarding Entries
- Monitoring IP Multicast Settings
- BGP Multicasting
- Investigating Multicast Routes
- Configuring IGMP
- IGMP Overview
- Platform Considerations
- References
- Before You Begin
- Configuring Static and Dynamic IGMP Interfaces
- Enabling IGMP on an Interface
- Configuring IGMP Settings for an Interface
- Specifying Multicast Groups
- Assigning a Multicast Group to an Interface
- Configuring Group Outgoing Interface Mapping
- Configuring Access Node Control Protocol for IGMP
- Configuring SSM Mapping
- Limiting the Number of Accepted IGMP Groups
- Including and Excluding Traffic
- Configuring Explicit Host Tracking
- Accepting IGMP Reports from Remote Subnetworks
- Disabling and Removing IGMP
- Monitoring IGMP
- IGMP Proxy Overview
- Configuring IGMP Proxy
- Establishing the IGMP Proxy Baseline
- Monitoring IGMP Proxy
- Configuring PIM for IPv4 Multicast
- Overview
- Platform Considerations
- References
- Before You Begin
- Enabling PIM on a VR
- Disabling PIM on a VR
- Enabling PIM on an Interface
- Setting a Priority to Determine the Designated Router
- Configuring the PIM Join/Prune Message Interval
- Configuring an RP Router for PIM Sparse Mode and PIM Sparse-Dense Mode
- Configuring BSR and RP Candidates for PIM Sparse Mode
- Migrating to BSR from Auto-RP
- Switching to an SPT for PIM Sparse Mode
- Creating Multicast VPNs
- Using PIM Sparse Mode Join Filters
- Configuring PIM SSM
- Configuring the BFD Protocol for PIM
- Removing PIM
- Resetting PIM Counters and Mappings
- Monitoring PIM
- Configuring DVMRP
- Overview
- Platform Considerations
- References
- Before You Begin
- Enabling DVMRP on a VR
- Activating DVMRP on an Interface
- Configuring DVMRP Limits
- Filtering DVMRP Reports
- Configuring DVMRP Summary Addresses
- Changing the Metric for a Route
- Importing Routes from Other Protocols
- Specifying Routes to Be Advertised
- Preventing Dynamic Route Distribution
- Exchanging DVMRP Unicast Routes
- Disabling and Removing DVMRP
- Clearing DVMRP Routes
- Configuring DVMRP Tunnels
- Monitoring DVMRP
- Internet Protocol Version 6
- Configuring IPv6 Multicast
- IPv6 Multicast Overview
- Platform Considerations
- References
- Before You Begin
- Configuring the Switching Fabric Bandwidth
- Enabling IPv6 Multicast
- Defining Static Routes for Reverse-Path Forwarding
- Displaying Available Routes for Reverse-Path Forwarding
- Enabling and Disabling RPF Checks
- Using Unicast Routes for RPF
- Defining Permanent IPv6 Multicast Forwarding Entries
- Defining a Multicast Bandwidth Map
- Configuring Multicast QoS Adjustment
- Activating Multicast QoS Adjustment Functions
- Configuring Hardware Multicast Packet Replication
- Blocking and Limiting Multicast Traffic
- Deleting Multicast Forwarding Entries
- Monitoring IPv6 Multicast Settings
- BGP Multicast
- Configuring Multicast Listener Discovery
- Overview
- Platform Considerations
- References
- Before You Begin
- Configuring Static and Dynamic MLD Interfaces
- Enabling MLD on an Interface
- Configuring MLD Settings for an Interface
- Specifying Multicast Groups
- Assigning a Multicast Group to an Interface
- Configuring Group Outgoing Interface Mapping
- Configuring SSM Mapping
- Limiting the Number of Accepted MLD Groups
- Including and Excluding Traffic
- Configuring Explicit Host Tracking
- Disabling and Removing MLD
- Monitoring MLD
- MLD Proxy Overview
- Configuring MLD Proxy
- Setting the MLD Proxy Baseline
- Monitoring MLD Proxy
- Configuring PIM for IPv6 Multicast
- Overview
- Platform Considerations
- References
- Before You Begin
- Enabling and Disabling PIM on a VR
- Enabling PIM on an Interface
- Setting a Priority to Determine the Designated Router
- Configuring the PIM Join/Prune Message Interval
- Configuring an RP Router for PIM Sparse Mode
- Configuring BSR and RP Candidates for PIM Sparse Mode
- Switching to an SPT for PIM Sparse Mode
- Configuring PIM Sparse Mode Remote Neighbors
- Using PIM Sparse Mode Join Filters
- Configuring PIM SSM
- Configuring the BFD Protocol for PIM
- Removing PIM
- Resetting PIM Counters and Mappings
- Monitoring PIM
- Index
